On Wed, Jun 29, 2005 at 09:27:18AM -0500, Adam Forsyth wrote: > You're looking at the old out of date readme. I submitted a patch just > yesterday for the readme, as the program has been changed several > times in the last year. How does this relate to my problem? In my example I only use -f and -c and as far as I can see they haven't changed.
Kind regards, Henk. > On 6/29/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > Hello, > > > > I have a pvr-150 which identifies as shown below. It looks as if the > > radio doesn't switch frequency when using a command like; > > > > ./radio -f 101 -c "cat /dev/video24 >radio" > > > > nothing changes. I get some sound, but the sound doesn't change when I > > alter the frequency. > > > > The second block of output is what happens when I enter the radio > > command. I guess the problem is caused by this line: > > > > ivtv: i2c client addr: 0x43 not found for command 27906! > > > > Anything I can do about this? > > > > Kind regards, > > > > Henk. > > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.3.6 (u) loading > > ivtv: Linux version: 2.6.11.11 SMP preempt K7 4KSTACKS gcc-3.3 > > ivtv: In case of problems please include the debug info > > ivtv: between the START INIT IVTV and END INIT IVTV lines when > > ivtv: mailing the ivtv-devel mailinglist. > > ivtv: Autodetected WinTV PVR 150 card > > ivtv: Found an iTVC16 based chip > > ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 > > ivtv: VIA PCI device: 0x3116 vendor: 0x1106 > > tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 7678759 > > tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) > > tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, > > v4l2 = 0x00400e17) > > tveeprom: audio_processor = MSP3410D (type = 5) > > ivtv: i2c attach [client=tveeprom[50],ok] > > ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model > > 0x00892590, Revision 0x00000001 > > ivtv: PAL tuner detected > > ivtv: Radio detected > > tuner: Ignoring new-style parameters in presence of obsolete ones > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > > ivtv: i2c attach [client=(tuner unset),ok] > > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > > cx25840: detecting cx25840 client on address 0x88 > > cx25840: cx25843-23 found. Initializing... > > cx25840: requesting /lib/modules/HcwMakoA.ROM > > cx25840: firmware loaded > > ivtv: i2c attach [client=cx25840[50],ok] > > ivtv: i2c attach [client=wm8775[50],ok] > > ivtv: Encoder revision: 0x02050032 > > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > > ivtv: Configuring WinTV PVR 150 card with 5 streams > > ivtv: Registered v4l2 device for encoder MPEG minor 0 > > ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) > > ivtv: Registered v4l2 device for encoder YUV minor 32 > > ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) > > ivtv: Registered v4l2 device for encoder VBI minor 224 > > ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) > > ivtv: Registered v4l2 device for encoder PCM audio minor 24 > > ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) > > ivtv: Registered v4l2 device for encoder radio minor 64 > > ivtv: Create encoder radio stream > > ivtv: Setting Tuner 58 > > tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0 > > cx25840: decoder set norm PAL > > cx25840: decoder set input (6) > > cx25840: now setting Tuner input > > ivtv: ivtv_enc_thread: pid = 17994, itv = 0xdebc4b60 > > ivtv: ivtv_enc_vbi_thread: pid = 17995, itv = 0xdebc4b60 > > cx25840: set audio input (0) > > ivtv: Switching standard to PAL. > > cx25840: decoder set norm PAL > > ivtv: Initialized WinTV PVR 150, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > > > > > ivtv: Allocate encoder radio stream > > cx25840: decoder disable output > > ivtv: i2c client addr: 0x43 not found for command 27906! > > cx25840: set audio input (4) > > cx25840: decoder enable output > > cx25840: decoder set norm PAL > > cx25840: decoder set input (6) > > cx25840: now setting Tuner input > > cx25840: set audio input (4) > > cx25840: decoder disable output > > cx25840: decoder enable output > > cx25840: decoder set norm PAL > > cx25840: decoder set input (6) > > cx25840: now setting Tuner input > > cx25840: set audio input (4) > > cx25840: decoder disable output > > cx25840: set audio input (0) > > cx25840: decoder enable output > > cx25840: decoder set norm PAL > > cx25840: decoder set input (6) > > cx25840: now setting Tuner input > > cx25840: set audio input (0) > > > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
