Hi,
I did have MythTV working pretty well. Then I did a big update .... to
ivtv 0.3.6w, to FC3 version 2.6.11-1.35_FC3, to lirc 0.7.1-46, to
mplayer 1.0-45. I'm running MythTV 0.18.1.
After a couple of problems I could noodle thru myself, I'm stumped on
one. When I watch live TV, it plays for maybe ten seconds and then
reverts back to the Myth menu. If I press a remote control key, it acts
the same but reverts (crashes) all the way back to the desktop.
The /var/log/messages file isn't much help. The ivtv section plus the
stuff after it is listed below. Any suggestions will be greatly
appreciated. Thanks!
Joe Henley
Jul 17 16:48:51 Rambo kernel: ivtv: ==================== START INIT IVTV
====================
Jul 17 16:48:51 Rambo kernel: ivtv: version 0.3.6 (w) loading
Jul 17 16:48:51 Rambo kernel: ivtv: Linux version: 2.6.11-1.35_FC3 686
REGPARM 4KSTACKS gcc-3.4
Jul 17 16:48:51 Rambo kernel: ivtv: In case of problems please include
the debug info
Jul 17 16:48:51 Rambo kernel: ivtv: between the START INIT IVTV and END
INIT IVTV lines when
Jul 17 16:48:51 Rambo kernel: ivtv: mailing the ivtv-devel mailinglist.
Jul 17 16:48:51 Rambo kernel: ivtv: Autodetected WinTV PVR 350 card
Jul 17 16:48:51 Rambo kernel: ivtv: Found an iTVC15 based chip
Jul 17 16:48:51 Rambo kernel: ACPI: PCI Interrupt Link [LNKG] enabled at
IRQ 3
Jul 17 16:48:51 Rambo kernel: PCI: setting IRQ 3 as level-triggered
Jul 17 16:48:51 Rambo kernel: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI
3 (level, low) -> IRQ 3
Jul 17 16:48:51 Rambo kernel: ivtv: Unreasonably low latency timer,
setting to 64 (was 32)
Jul 17 16:48:51 Rambo kernel: ivtv: XXX PCI device: 0x2530 vendor: 0x8086
Jul 17 16:48:51 Rambo kernel: tveeprom: Hauppauge: model = 48132, rev =
K268, serial# = 2866935
Jul 17 16:48:51 Rambo kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx =
68, type = 47)
Jul 17 16:48:51 Rambo kernel: tveeprom: tuner fmt = NTSC(M) (eeprom =
0x08, v4l2 = 0x00001000)
Jul 17 16:48:51 Rambo kernel: tveeprom: audio_processor = MSP3440 (type
= 11)
Jul 17 16:48:51 Rambo fstab-sync[3969]: removed all generated mount points
Jul 17 16:48:51 Rambo kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Jul 17 16:48:51 Rambo kernel: ivtv: Tuner Type 47, Tuner formats
0x00001000, Radio: yes, Model 0x00ad2598, Revision 0x00000001
Jul 17 16:48:51 Rambo kernel: ivtv: NTSC tuner detected
Jul 17 16:48:51 Rambo kernel: ivtv: Radio detected
Jul 17 16:48:51 Rambo kernel: tuner: Ignoring new-style parameters in
presence of obsolete ones
Jul 17 16:48:51 Rambo kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Jul 17 16:48:52 Rambo kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jul 17 16:48:52 Rambo kernel: saa7115: starting probe for adapter SMBus
I801 adapter at efa0 (0x0)
Jul 17 16:48:52 Rambo kernel: saa7115: starting probe for adapter ISA
main adapter (0x0)
Jul 17 16:48:52 Rambo kernel: saa7115: starting probe for adapter ivtv
i2c driver #0 (0x10005)
Jul 17 16:48:52 Rambo kernel: saa7115: detecting saa7115 client on
address 0x42
Jul 17 16:48:52 Rambo kernel: saa7115: writing init values
Jul 17 16:48:52 Rambo kernel: ivtv: i2c attach [client=saa7115[50],ok]
Jul 17 16:48:52 Rambo kernel: saa7115: status: (1E) 0x00, (1F) 0xc0
Jul 17 16:48:52 Rambo fstab-sync[4145]: added mount point
/media/cdrecorder1 for /dev/hdc
Jul 17 16:48:52 Rambo kernel: saa7127: Ignoring new-style parameters in
presence of obsolete ones
Jul 17 16:48:52 Rambo kernel: saa7127: video encoder driver version V
0.3 loaded
Jul 17 16:48:52 Rambo kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 17 16:48:52 Rambo kernel: saa7127: Selecting NTSC video Standard
Jul 17 16:48:52 Rambo kernel: saa7127: Selecting S-Video+Composite
Jul 17 16:48:52 Rambo kernel: saa7127: Turn WSS off
Jul 17 16:48:52 Rambo kernel: saa7127: Widescreen Mode 4:3 Full Format
Jul 17 16:48:52 Rambo kernel: saa7127: Selecting Normal Encoder Input
Jul 17 16:48:52 Rambo kernel: saa7127: Enable Video Output
Jul 17 16:48:52 Rambo kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 17 16:48:52 Rambo kernel: saa7127: Selecting NTSC video Standard
Jul 17 16:48:52 Rambo kernel: saa7127: Selecting S-Video+Composite
Jul 17 16:48:52 Rambo kernel: saa7127: Turn WSS off
Jul 17 16:48:52 Rambo kernel: saa7127: Widescreen Mode 4:3 Full Format
Jul 17 16:48:52 Rambo kernel: saa7127: Selecting Normal Encoder Input
Jul 17 16:48:52 Rambo kernel: saa7127: Enable Video Output
Jul 17 16:48:52 Rambo kernel: ivtv: i2c attach [client=saa7127[50],ok]
Jul 17 16:48:52 Rambo kernel: msp34xx: ivtv version
Jul 17 16:48:52 Rambo kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM
support, simple (D) mode, simpler (G) no-thread mode
Jul 17 16:48:52 Rambo kernel: msp34xx: $Id$ compiled on: Jul 3 2005
09:49:11
Jul 17 16:48:52 Rambo kernel: ivtv: i2c attach [client=MSP3448W-A2,ok]
Jul 17 16:48:53 Rambo kernel: ivtv: Encoder revision: 0x02040024
Jul 17 16:48:53 Rambo kernel: ivtv: Encoder Firmware may be buggy, use
version 0x02040011
Jul 17 16:48:53 Rambo kernel: ivtv: Decoder revision: 0x02020023
Jul 17 16:48:53 Rambo kernel: ivtv: Configuring WinTV PVR 350 card with
10 streams
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for encoder
MPEG minor 0
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA encoder MPEG stream: 0 x
32768 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate DMA encoder MPEG stream:
128 x 32768 buffers (4096KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for encoder
YUV minor 32
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA encoder YUV stream: 0 x
10800 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate DMA encoder YUV stream: 194
x 10800 buffers (2048KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for encoder
VBI minor 224
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA encoder VBI stream: 0 x
8736 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate DMA encoder VBI stream: 240
x 8736 buffers (2048KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for encoder
PCM audio minor 24
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA encoder PCM audio stream:
0 x 4608 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate DMA encoder PCM audio
stream: 455 x 4608 buffers (2048KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for encoder
radio minor 64
Jul 17 16:48:53 Rambo kernel: ivtv: Create encoder radio stream
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate encoder radio stream
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for decoder
MPEG minor 16
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA decoder MPEG stream: 0 x
65536 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate DMA decoder MPEG stream: 16
x 65536 buffers (1024KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for decoder
VBI minor 228
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA decoder VBI stream: 0 x
2048 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate DMA decoder VBI stream: 512
x 2048 buffers (1024KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for decoder
VOUT minor 232
Jul 17 16:48:53 Rambo kernel: ivtv: Create decoder VOUT stream
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate decoder VOUT stream
Jul 17 16:48:53 Rambo kernel: ivtv: Registered v4l2 device for decoder
YUV minor 48
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA decoder YUV stream: 0 x
43200 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Allocate DMA decoder YUV stream: 24
x 43200 buffers (1024KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Create DMA decoder OSD stream: 0 x
65536 buffers (0KB total)
Jul 17 16:48:53 Rambo kernel: ivtv: Setting Tuner 47
Jul 17 16:48:53 Rambo kernel: tuner: type set to 47 (LG NTSC (TAPE
series)) by ivtv i2c driver #0
Jul 17 16:48:53 Rambo kernel: saa7115: decoder set norm NTSC
Jul 17 16:48:53 Rambo kernel: ivtv: ivtv_enc_thread: pid = 4304, itv =
0xe0e209a0
Jul 17 16:48:53 Rambo kernel: ivtv: ivtv_enc_vbi_thread: pid = 4305, itv
= 0xe0e209a0
Jul 17 16:48:53 Rambo kernel: ivtv: ivtv_dec_thread: pid = 4306, itv =
0xe0e209a0
Jul 17 16:48:53 Rambo kernel: ivtv: ivtv_dec_vbi_thread: pid = 4307, itv
= 0xe0e209a0
Jul 17 16:48:54 Rambo kernel: saa7115: set audio: 0x01
Jul 17 16:48:54 Rambo kernel: saa7115: decoder set input (4)
Jul 17 16:48:54 Rambo kernel: saa7115: now setting Composite input
Jul 17 16:48:54 Rambo kernel: ivtv: Setting audio matrix to input 3,
output 1
Jul 17 16:48:54 Rambo kernel: ivtv: Switching standard to NTSC.
Jul 17 16:48:54 Rambo kernel: saa7115: decoder set norm NTSC
Jul 17 16:48:54 Rambo kernel: saa7115: set audio: 0x01
Jul 17 16:48:54 Rambo kernel: saa7127: Setting Encoder Video Standard
Jul 17 16:48:54 Rambo kernel: saa7127: Set NTSC Video Mode
Jul 17 16:48:54 Rambo kernel: saa7127: Selecting NTSC video Standard
Jul 17 16:48:54 Rambo kernel: ivtv: Initialized WinTV PVR 350, card #0
Jul 17 16:48:54 Rambo kernel: ivtv: ==================== END INIT IVTV
====================
Jul 17 16:48:54 Rambo kernel: ivtv-osd: Framebuffer module loaded
(attached to ivtv card id 0)
Jul 17 16:48:54 Rambo kernel: ivtv-osd: Framebuffer is at
decoder-relative address 0x00510000 and has 1704960 bytes.
Jul 17 16:48:54 Rambo kernel: ivtv-osd: screen coords: [0 0] -> [720 480]
Jul 17 16:48:54 Rambo kernel: ivtv-osd: original global alpha = 208
Jul 17 16:48:54 Rambo kernel: ivtv-osd: current OSD state = 39
Jul 17 16:48:54 Rambo kernel: ivtv-osd: new global alpha = 208 (1 255 0)
Jul 17 16:48:54 Rambo kernel: ivtv-osd: framebuffer at 0xf1510000,
mapped to 0xe1d10000, size 1350k
Jul 17 16:48:54 Rambo kernel: ivtv-osd: mode is 720x480x32, linelength=2880
Jul 17 16:48:54 Rambo kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer
device
Jul 17 16:48:54 Rambo kernel: ivtv: Allocate DMA decoder OSD stream: 16
x 65536 buffers (1024KB total)
Jul 17 16:48:54 Rambo kernel: lirc_dev: IR Remote Control driver
registered, at major 61
Jul 17 16:48:54 Rambo kernel: cx2388x v4l2 driver version 0.0.4 loaded
Jul 17 16:48:54 Rambo kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Jul 17 16:48:54 Rambo kernel: ivtv: i2c attach [client=Hauppauge IR,ok]
Jul 17 16:48:54 Rambo kernel: lirc_dev: lirc_register_plugin:
sample_rate: 10
Jul 17 16:48:56 Rambo kernel: ivtv: Tried to open YUV output device but
need to send data to mpeg decoder before it can be used
Jul 17 16:48:56 Rambo gdm[4506]: gdm_config_parse: TimedLoginDelay less
than 5, so I will just use 5.
Jul 17 16:49:00 Rambo kernel: ivtv: Tried to open YUV output device but
need to send data to mpeg decoder before it can be used
Jul 17 16:49:03 Rambo gdmgreeter[5073]: TimedLoginDelay was less than 5.
I'll just use 5.
Jul 17 16:49:10 Rambo gdm-autologin(pam_unix)[4882]: session opened for
user mythtv by (uid=0)
Jul 17 16:49:10 Rambo gconfd (root-5101): starting (version 2.8.1), pid
5101 user 'root'
Jul 17 16:49:10 Rambo gconfd (root-5101): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
configuration source at position 0
Jul 17 16:49:10 Rambo gconfd (root-5101): Resolved address
"xml:readwrite:/root/.gconf" to a writable configuration source at
position 1
Jul 17 16:49:10 Rambo gconfd (root-5101): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
configuration source at position 2
Jul 17 16:49:16 Rambo gconfd (mythtv-5262): starting (version 2.8.1),
pid 5262 user 'mythtv'
Jul 17 16:49:16 Rambo gconfd (mythtv-5262): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
configuration source at position 0
Jul 17 16:49:16 Rambo gconfd (mythtv-5262): Resolved address
"xml:readwrite:/home/mythtv/.gconf" to a writable configuration source
at position 1
Jul 17 16:49:16 Rambo gconfd (mythtv-5262): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
configuration source at position 2
Jul 17 16:49:19 Rambo lircd-0.7.1[3695]: accepted new client on /dev/lircd
Jul 17 16:49:29 Rambo rpc.mountd: authenticated mount request from
Eddie.HENLEY:686 for / (/)
Jul 17 16:51:54 Rambo ntpd[3479]: synchronized to LOCAL(0), stratum 10
Jul 17 16:51:54 Rambo ntpd[3479]: kernel time sync disabled 0041
Jul 17 16:52:57 Rambo ntpd[3479]: synchronized to 64.142.28.65, stratum 2
Jul 17 17:01:01 Rambo crond(pam_unix)[5318]: session opened for user
root by (uid=0)
Jul 17 17:01:01 Rambo crond(pam_unix)[5318]: session closed for user root
Jul 17 17:05:48 Rambo kernel: saa7115: decoder set size
Jul 17 17:05:48 Rambo kernel: ivtv: Setup VBI API header 0x0000bd0d pkts
1 buffs 4 ln 24 sz 1456
Jul 17 17:05:48 Rambo kernel: ivtv: Setup VBI start 0x0018ea04 frames 4
fpi 1 lines 0x000000f1
Jul 17 17:05:48 Rambo kernel: saa7115: decoder disable output
Jul 17 17:05:48 Rambo kernel: saa7115: decoder enable output
Jul 17 17:05:50 Rambo kernel: ivtv: Decoder VBI RE-Insert start
0x0019ac00 size 0x0000be00 type 0
Jul 17 17:06:17 Rambo kernel: saa7115: decoder set size
Jul 17 17:06:17 Rambo kernel: ivtv: Setup VBI API header 0x0000bd0d pkts
1 buffs 4 ln 24 sz 1456
Jul 17 17:06:17 Rambo kernel: ivtv: Setup VBI start 0x0018ea04 frames 4
fpi 1 lines 0x000000f1
Jul 17 17:06:18 Rambo kernel: saa7115: decoder disable output
Jul 17 17:06:18 Rambo kernel: saa7115: decoder enable output
Jul 17 17:06:20 Rambo kernel: ivtv: Decoder VBI RE-Insert start
0x0019ac00 size 0x0000be00 type 0
Jul 17 17:06:40 Rambo lircd-0.7.1[3695]: removed client
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
