Hi,
Since today I suddenly have no sound anymore (maybe
because I rebooted my machine?). I load ivtv with the
following script:
#!/bin/sh
rmmod ivtv tveeprom tuner cx25840 wm8775 videodev
modprobe tveeprom
sleep 2
echo Loading videodev
modprobe videodev
sleep 2
echo Loading cx25840
modprobe cx25840 i2c_enable=1
sleep 2
echo Loading tuner
modprobe tuner
sleep 2
echo Loading wm8775
modprobe wm8775
sleep 2
echo Loading ivtv
modprobe ivtv ivtv_std=2 tuner=55 cardtype=6
tda9887=0,0,0
Aug 10 13:22:26 localhost kernel: ivtv:
==================== START INIT IVTV
====================
Aug 10 13:22:26 localhost kernel: ivtv: version 0.3.3
(k) loading
Aug 10 13:22:26 localhost kernel: ivtv: Linux version:
2.6.11-ruby preempt 386 gcc-3.3
Aug 10 13:22:26 localhost kernel: ivtv: In case of
problems please include the debug info
Aug 10 13:22:26 localhost kernel: ivtv: between the
START INIT IVTV and END INIT IVTV lines when
Aug 10 13:22:26 localhost kernel: ivtv: mailing the
ivtv-devel mailinglist.
Aug 10 13:22:26 localhost kernel: ivtv: User specified
WinTV PVR 150 card
Aug 10 13:22:26 localhost kernel: ivtv: Found an
iTVC16 based chip
Aug 10 13:22:26 localhost kernel: ACPI: PCI interrupt
0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
Aug 10 13:22:26 localhost kernel: ivtv: XXX PCI
device: 0x2570 vendor: 0x8086
Aug 10 13:22:26 localhost kernel: tveeprom: Hauppauge:
model = 26034, rev = C197, serial# = 7892631
Aug 10 13:22:26 localhost kernel: tveeprom: tuner = LG
PAL (TAPE Series) (idx = 97, type = 55)
Aug 10 13:22:26 localhost kernel: tveeprom: tuner fmt
= PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07)
Aug 10 13:22:26 localhost kernel: tveeprom:
audio_processor = MSP3400C (type = 4)
Aug 10 13:22:26 localhost kernel: ivtv: i2c attach
[client=tveeprom[50],ok]
Aug 10 13:22:30 localhost kernel: cx25840: FW image
'/lib/modules/HcwMakoA.ROM' of size 14264 loaded.
Aug 10 13:22:30 localhost kernel: cx25840: FW image
md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa
Aug 10 13:22:30 localhost kernel: cx25840: FW image
sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6
Aug 10 13:22:30 localhost kernel: ivtv: i2c attach
[client=cx25840[50],ok]
Aug 10 13:22:30 localhost kernel: tuner: chip found at
addr 0xc2 i2c-bus ivtv i2c driver #0
Aug 10 13:22:30 localhost kernel: ivtv: i2c attach
[client=(tuner unset),ok]
Aug 10 13:22:30 localhost kernel: ivtv: i2c attach
[client=wm8775[50],ok]
Aug 10 13:22:30 localhost kernel: ivtv: Tuner Type 55,
Tuner formats 0x00000e07, Radio: yes, Model
0x008d1657, Revision 0x00000000
Aug 10 13:22:30 localhost kernel: ivtv: Radio detected
Aug 10 13:22:31 localhost kernel: ivtv: Encoder
revision: 0x02050032
Aug 10 13:22:31 localhost kernel: ivtv: Encoder
Firmware may be buggy, use version 0x02040011
Aug 10 13:22:31 localhost kernel: ivtv: Configuring
WinTV PVR 150 card with 4 streams
Aug 10 13:22:31 localhost kernel: ivtv: Registered
v4l2 device, streamtype 0 minor 0
Aug 10 13:22:31 localhost kernel: ivtv: Create DMA
stream 0 using 1024 16384 byte buffers 0 kbytes total
Aug 10 13:22:31 localhost kernel: ivtv: Allocate DMA
stream 0 using 1024 16384 byte buffers 16777216
kbytes total
Aug 10 13:22:31 localhost kernel: ivtv: Registered
v4l2 device, streamtype 1 minor 32
Aug 10 13:22:31 localhost kernel: ivtv: Create DMA
stream 1
Aug 10 13:22:31 localhost kernel: ivtv: Allocate DMA
stream 1
Aug 10 13:22:31 localhost kernel: ivtv: Registered
v4l2 device, streamtype 2 minor 224
Aug 10 13:22:31 localhost kernel: ivtv: Create DMA
stream 2 using 121 34632 byte buffers 0 kbytes total
Aug 10 13:22:31 localhost kernel: ivtv: Allocate DMA
stream 2 using 121 34632 byte buffers 4194304 kbytes
total
Aug 10 13:22:31 localhost kernel: ivtv: Registered
v4l2 device, streamtype 3 minor 24
Aug 10 13:22:31 localhost kernel: ivtv: Create DMA
stream 3 using 455 4608 byte buffers 0 kbytes total
Aug 10 13:22:31 localhost kernel: ivtv: Allocate DMA
stream 3 using 455 4608 byte buffers 2097152 kbytes
total
Aug 10 13:22:31 localhost kernel: ivtv: Setting Tuner
55
Aug 10 13:22:31 localhost kernel: tuner: type set to
55 (LG PAL (TAPE series)) by ivtv i2c driver #0
Aug 10 13:22:31 localhost kernel: ivtv:
ivtv_enc_thread: pid = 12433, itv = 0xe0e6aa20
Aug 10 13:22:31 localhost kernel: ivtv: Switching
standard to PAL.
Aug 10 13:22:31 localhost kernel: ivtv: i2c client
addr: 0x43 not found!
Aug 10 13:22:31 localhost kernel: ivtv: Initialized
WinTV PVR 150, card #0
Aug 10 13:22:31 localhost kernel: ivtv:
==================== END INIT IVTV
====================
Does it have something to do with the "i2c client
addr: 0x43 not found!"? Can somebody please help me?
Greets,
Andrej
___________________________________________________________
To help you stay safe and secure online, we've developed the all new Yahoo!
Security Centre. http://uk.security.yahoo.com
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
