Hi Folks, I'm relatively new to the list. I want to get the ivtv drivers working on my PowerPC linux box, and here are the results of my attempts so far. BTW - all this is happening on a PowerPC box running Debian testing, with the only change being an upgrade to a self-complied 2.6.12.2 kernel. Picked up a Hauppage 350 card (NTSC version) to experiment with.
Tried some of the older late 0.1.9* and 0.3.6* series with no success. I grabbed, the 0.3.7c set of drivers this morning. It seemed to compile with fewer errors and warnings than previous versions, but running cat /dev/video0 > test.mpg still gives an empty file. Attached are my /etc/modules file, and the relevant portion of the dmesg output. The ROM I used was extracted from the CD I got with the TV card. Is there a location to get the ROM that was referred to in the dmesg output ? thanx. cheers vinai
modules
Description: Binary data
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (c) loading ivtv: Linux version: 2.6.12.2-patched-VR SMP gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7683587 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad2598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: skipping probe on adapter ivtv i2c driver #0 (0x10005) msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Aug 14 2005 11:46:44 ivtv: i2c attach [client=MSP3448W-A2,ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Registered v4l2 device for decoder MPEG minor 16 ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total) ivtv: Registered v4l2 device for decoder VBI minor 228 ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total) ivtv: Registered v4l2 device for decoder VOUT minor 232 ivtv: Create decoder VOUT stream ivtv: Registered v4l2 device for decoder YUV minor 48 ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total) ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total) ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 2792, itv = 0xf1295540 ivtv: ivtv_enc_vbi_thread: pid = 2793, itv = 0xf1295540 ivtv: ivtv_dec_thread: pid = 2794, itv = 0xf1295540 ivtv: ivtv_dec_vbi_thread: pid = 2795, itv = 0xf1295540 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: i2c client addr: 0x44 not found for command 0x80046502! saa7115: decoder disable output saa7115: decoder enable output ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ====================
