Can you test this also with a 0.3.7a and 0.3.7c? I've made some changes
recently and I want to make sure that I'm not the cause :-) If it works with
the a or c version, then I'd have to go over the code again, see if I screwed
up. If it also fails with these older version, then I'd recommend waiting
until the 0.3.7e version is released today or tomorrow. I do assume that your
reboot is reproducable?
BTW: I saw in the log that you do not have the recommended firmware. Get that
one first (see doc/QuickSetup).
Hans
On Monday 15 August 2005 19:08, Mr. Myth wrote:
> I have ( had ) two PVR-250's that were working great with 0.3.6w from Axel.
>
> I purchased a PVR-500 as a replacement because I needed the extra slot.
> I tried it with 0.3.6w but had many issues getting both tuners to work.
> I had read the 0.3.7<X> series was looking good so I thought I would try
> it.
>
> So, now I am running 0.3.7d from Axel and am having a new problem.
> After about 5-7 minutes of recording my computer will reboot. I don't
> get anything regarding a panic in the logs. I just hear the bios beep
> and can watch it reboot. If I am not recording, the box is completely
> stable.
>
> I have attached my ivtv logs.
>
> modprobe.conf looks like:
>
> # ivtv modules setup
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> alias char-major-81-1 ivtv
>
> alias tveeprom tveeprom-ivtv
> alias tuner tuner-ivtv
> alias msp3400 msp3400-ivtv
>
>
> Any ideas on what might be causing the panic or what I should try?
>
> Michael
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
