> > Hmm Hungary was hard ;-)... On the net a lot of sites say you run SECAM,
> > but at least some of them say you run PAL D or K (depending on VHF or UHF).
> > As Philip posted you might have a problem with your "sound offset" which is
> > 6.5MHz where most others use 5.5MHz.
> tda9885/6/7: write: byte E 0x09
> E0-1 sound carrier : 5.5 MHz
> E6 l pll ganting : 13
> E2-4 video if : 38.9 MHz
> E5 tuner gain : normal
> E7 vif agc output : pin3+pin22 port
As assumed then. Your tuner is set to 5.5MHz ("E0-1 sound carrier") and not to
6.5MHz as specified by the PAL-D/K. Not sure how this can be done correctly but
I would suggest the ivtv-coders to add an option to be able to change the SIF
frequence, as some PAL-M/N people also would like to choose 4.5MHz (our South
American friends).
Please notify Hans V (on this mailing list) or report this on the
ivtv-sourceforge (if this is still active)...
> It was the 0.3.7a... switching back... test...
> Oh, it has sound again. :-) Then the driver... I will
> check later all versions since 3.7a, which became
> buggy.
This would really help as I know Hans V has been done most of the work since
0.3.7b... ie he would then be able to track down what setting he changed...
>
> > Hmm, can it be a "TCL MPE05 Mk2"??
>
> Pff, it means nothing to me :-).
Don't worry, this was more targetted to the developers...
/Corax
