Hello all, I've recently added a PVR-500MCE to a MythTV box that has been running happily with a PVR-350 for several months. I've only been able to get one of the two 500 tuners working. I'm running ivtv 0.4.0 on kernel 2.6.12(-1.1381_FC3 on a Fedora Core 3 system).
/dev/video0 is the PVR-350 and works fine. /dev/video1 (first tuner on PVR-500MCE), when set to input 6 (tuner 0) or 7 (tuner 1) display nothing but static. /dev/video2 (second tuner on PVR-500MCE), set to either input 6 or 7, works just fine. I've been banging my head against this for several hours without making any progress -- I'm hoping someone here will have some insight. I've seen one or two other reports of this same problem, but in one case there never was a response and the other appeared to mysteriously correct itself after a reboot. I've been through several reboots without any change. The dmesg output for this system is attached to this message (unless the list filters attachments, in which case the output is available at http://www.larsshack.org/ivtv/dmesg.txt). Thanks in advance for your help, -- Lars -- Lars Kellogg-Stedman <[EMAIL PROTECTED]>
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3 tveeprom: ivtv version tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 7614615 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = MSP4448 (type = 1b) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Oct 29 2005 05:09:18 ivtv0: i2c attach to card #0 ok [client=MSP3448W-A2, addr=40] tda9885/6/7: chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: loading /lib/modules/ivtv-fw-dec.bin ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv0: loading /lib/modules/ivtv_init_mpeg.bin tuner 1-0061: type set to 47 (LG NTSC (TAPE series)) spurious 8259A interrupt: IRQ7. ivtv0: Initialized WinTV PVR 350, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7894842 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60] tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #1) tda9885/6/7: chip found @ 0x86 ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv1: This is the first unit of a PVR500 cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] ivtv1: loading /lib/modules/ivtv-fw-enc.bin ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 2-0060: type set to 57 (Philips FQ1236A MK4) ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKG] -> GSI 3 (level, low) -> IRQ 3 tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7894842 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50] ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #2) tda9885/6/7: chip found @ 0x86 ivtv2: i2c attach to card #2 ok [client=tda9887, addr=43] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) cx25840 3-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #2) ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b] ivtv2: This is the first unit of a PVR500 ivtv2: loading /lib/modules/ivtv-fw-enc.bin ivtv2: Encoder revision: 0x02050032 ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 3-0061: type set to 57 (Philips FQ1236A MK4) ivtv2: Initialized WinTV PVR 500 (unit #1), card #2 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
