I have a WinTV PVR 250.  The video works fine but, I cannot get it to capture sound.  I'm capturing using the composite connection. I'm testing with the following method:

ivtvctl -u 0x3000
ivtvctl -p 5
ivtvctl -f width=720,height=480

cat /dev/video0 > /tmp/test_capture.mpg
mplayer -vo xv /tmp/test_capture.mpg

mplayer output:
MPEG: No audio stream found -> no sound

I'm running Fedora Core 4 and have the no sound issue using the ATrpm build and when I build ivtv myself.

I have warnings in the init process of IVTV.

I've tested the capture on a windows box to confirm there is no sound.

Thanks for your help
Josh

Here is the output of /etc/modprobe.conf
=====================
alias eth0 sk98lin
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
options ndiswrapper if_name=wlan0
alias wlan0 ndiswrapper
alias char-major-81 ivtv
======================

Jan  2 15:28:34 mythtv kernel: ivtv:  ==================== START INIT IVTV ====================
Jan  2 15:28:34 mythtv kernel: ivtv:  version 0.4.1 (tagged release) loading
Jan  2 15:28:34 mythtv kernel: ivtv:  Linux version: 2.6.14-1.1653_FC4 686 REGPARM 4KSTACKS gcc-4.0
Jan  2 15:28:34 mythtv kernel: ivtv:  In case of problems please include the debug info between
Jan  2 15:28:34 mythtv kernel: ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
Jan  2 15:28:34 mythtv kernel: ivtv:  any module options, when mailing the ivtv-users mailinglist.
Jan  2 15:28:34 mythtv kernel: ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
Jan  2 15:28:34 mythtv kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
Jan  2 15:28:34 mythtv kernel: tveeprom: ivtv version
Jan  2 15:28:34 mythtv kernel: tveeprom: Hauppauge: model = 32062, rev = C199, serial# = 8202960
Jan  2 15:28:34 mythtv fstab-sync[2563]: removed all generated mount points
Jan  2 15:28:34 mythtv kernel: tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
Jan  2 15:28:34 mythtv kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Jan  2 15:28:34 mythtv kernel: tveeprom: audio processor = MSP3445 (type = c)
Jan  2 15:28:35 mythtv kernel: tveeprom: decoder processor = SAA7115 (type = 13)
Jan  2 15:28:35 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Jan  2 15:28:35 mythtv kernel: saa7115 0-0021: ivtv driver
Jan  2 15:28:35 mythtv kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Jan  2 15:28:35 mythtv kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
Jan  2 15:28:35 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
Jan  2 15:28:35 mythtv kernel: ivtv0: Encoder revision: 0x02050032
Jan  2 15:28:35 mythtv kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Jan  2 15:28:35 mythtv kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Jan  2 15:28:35 mythtv kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Jan  2 15:28:35 mythtv kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x00 not found for command 0x40045403!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x00 not found for command 0x40085618!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x00 not found for command 0x402c5639!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639!
Jan  2 15:28:35 mythtv fstab-sync[2573]: added mount point /media/usbdisk1 for /dev/sda1
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610!
Jan  2 15:28:35 mythtv kernel: ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611!
Jan  2 15:28:35 mythtv kernel: ivtv0: Initialized WinTV PVR 250, card #0
Jan  2 15:28:35 mythtv kernel: ivtv:  ====================  END INIT IVTV  ====================

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to