well, i got svn .5.2 working now, and the problems went away, however, I cannot change channels within myth unless i tell it to use ivtv-tune -c. you said tuner is not being detected in dmesg? i have pvr 150. how do i set it, then?
On 1/4/06, Keith C <[EMAIL PROTECTED]> wrote: > On Jan 4, 2006, at 12:28 AM, John H. wrote: > > > ok, i got latest firmware, and it seems sound works now, but i cannot > > change channels, and the picture is really fuzzy. > > here's the dmesg > > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.4.1 (tagged release) loading > > ivtv: Linux version: 2.6.15 preempt K7 gcc-4.0 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) > > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > > Yeah, you're going to have some serious problems, as the tuner is not > being set for your card. > > > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > > tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > ivtv0: Encoder revision: 0x02050032 > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers > > (4096KB total) > > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB > > total) > > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB > > total) > > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers > > (2048KB total) > > ivtv0: Create encoder radio stream > > ivtv0: Initialized WinTV PVR 150, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > Also, I did not see any messages from tveeprom. This doesn't look > good at all. What version of ivtv did you use before 0.4.1? Do you > have any module options? It looks like your kernel might be using > the versions of tuner and tveeprom that came with it instead of the > ivtv versions (which works ok for me, but not everyone). You also > want to verify that you are using the ivtv versions of tda9887 and > msp3400. > > Keith C > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
