Hi all, I have 0.4.2 running mostly fine with a PVR-150. I'm connected to Adelphia in Colorado Springs, CO. I seem to have issues with some channels (11, 13, ...), and I was wondering what's the best way to determine if my channel frequencies are off.
I am set up as us-cable. Should I use us-cable-hrc instead? (what's the diff anyway?) On channel 11, it seems like it's overdriving the red, and causing some waviness in the pictures. I can't remember the specifics of the other channels. Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.2 (tagged release) loading ivtv: Linux version: 2.6.8-2-k7 preempt K7 gcc-3.3 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, high) -> IRQ 201 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: Ignoring new-style parameters in presence of obsolete ones tveeprom: ivtv version tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7946856 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner: Ignoring new-style parameters in presence of obsolete ones tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] mice: PS/2 mouse device common for all mice cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840 0-0044: ivtv driver cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) ts: Compaq touchscreen protocol output cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 0-001b: ivtv driver wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9887: Ignoring new-style parameters in presence of obsolete ones tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
