On Thursday 02 February 2006 22:38, Joel Webb wrote:
Here are the errors guys.
I am trying to use ivtv-fb and ivtv-dev
Both errors are attached.
HEEELPP!!
> Greetings guys.
>
> After a month of trying to get the ivtv-fb driver to work with my xorg.conf
> file I really need some help.
>
> I am receiving an error when I do a start x that says that my device is not
> found, and that the ivtv-fb module has incorrect parameters.
>
> When I start it with the ivtvdev xorg.conf the X server starts on the
> monitor, but not on the TV.
>
> Below are two snippets of the one working and the one that isn't, plus my
> dmesg output.
>
> ----------------------xorg snippet with errors---------------------------
> Section "Device"
> Identifier "Hauppauge PVR350"
> #Driver "ivtvdev"
> Driver "ivtv-fb"
> #Option "fbdev" "/dev/fb1" # <-- modify if using another device
> #Option "ivtv_fb_card_id" "/dev/fb1" # <-- modify if using
> another device
> BusID "PCI:00:11.0" # get the ID with lspci convert the value from hexa
> to decimal
> EndSection
> ------------------end xorg snippet with errors-----------------------------
>
>
> Below is part of another xorg config file that starts the x server on the
> monitor, but not on the tv. and it is using the old ivtvdev module that
> doesn't exist anymore.
>
> ------------xorg no errors / no
> fb-------------------------------------------- Section "Device"
> Identifier "Hauppauge PVR350"
> Driver "ivtvdev"
> Option "fbdev" "/dev/fb1" # <-- modify if using another
> device BusID "PCI:00:0b.0" # get the ID with lspci convert the
> value from hexa to decimal
> EndSection
> -----------xorg no errors / no fb------------------------------------
>
>
>
> ivtv: module not supported by Novell, setting U taint flag.
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.3.7 (c) loading
> ivtv: Linux version: 2.6.13-15.7-default 586 REGPARM gcc-4.0
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 350 card
> ivtv: Found an iTVC15 based chip
> ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low)
> -> IRQ 10
> i2c-algo-bit.o: (0) scl=1, sda=1
> i2c-algo-bit.o: (1) scl=1, sda=0
> i2c-algo-bit.o: (2) scl=1, sda=1
> i2c-algo-bit.o: (3) scl=0, sda=1
> i2c-algo-bit.o: (4) scl=1, sda=1
> i2c-algo-bit.o: ivtv i2c driver #0 passed test.
> tveeprom: The eeprom says no radio is present, but the tuner type
> tveeprom: indicates otherwise. I will assume that radio is present.
> tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207478
> tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3440 (type = 11)
> ivtv: i2c attach [client=tveeprom[50],ok]
> kobject_register failed for tveeprom (-17)
> [<c01ee6c3>] kobject_register+0x43/0x50
> [<c0255a9d>] bus_add_driver+0x4d/0xa0
> [<df30e51a>] i2c_add_driver+0x3a/0xc0 [i2c_core]
> [<c0134291>] sys_init_module+0xa1/0x180
> [<c0102d1b>] sysenter_past_esp+0x54/0x79
> ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model
> 0x00ad2598, Revision 0x00000001
> ivtv: NTSC tuner detected
> ivtv: Radio detected
>
> : chip found @ 0xc2 (ivtv i2c driver #0)
>
> ivtv: i2c attach [client=(tuner unset),ok]
> saa7115: module not supported by Novell, setting U taint flag.
> saa7115: starting probe for adapter SiS96x SMBus adapter at 0x0c00 (0x0)
> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
> saa7115: detecting saa7115 client on address 0x42
> saa7115: writing init values
> ivtv: i2c attach [client=saa7115[50],ok]
> saa7115: status: (1E) 0x00, (1F) 0xc0
> saa7127: module not supported by Novell, setting U taint flag.
> saa7127: Ignoring new-style parameters in presence of obsolete ones
> saa7127: video encoder driver version V 0.3 loaded
> saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005)
> saa7127: detecting saa7127 client on address 0x88
> saa7127: Selecting NTSC video Standard
> saa7127: Selecting S-Video+Composite
> saa7127: Turn WSS off
> saa7127: Widescreen Mode 4:3 Full Format
> saa7127: Selecting Normal Encoder Input
> saa7127: Enable Video Output
> ivtv: i2c attach [client=saa7127[50],ok]
> msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler
> ivtv: i2c attach [client=MSP3448W-A2,ok]
> msp34xxg: daemon started
> ivtv: requesting ivtv-fw-enc.bin from hotplug
> ivtv: firmware loaded
> ivtv: requesting ivtv-fw-dec.bin from hotplug
> ivtv: firmware loaded
> ivtv: Encoder revision: 0x02040011
> ivtv: Decoder revision: 0x02020023
> ivtv: Configuring WinTV PVR 350 card with 10 streams
> ivtv: Registered v4l2 device for encoder MPEG minor 0
> ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
> ivtv: Registered v4l2 device for encoder YUV minor 32
> ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
> ivtv: Registered v4l2 device for encoder VBI minor 224
> ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
> ivtv: Registered v4l2 device for encoder PCM audio minor 24
> ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
> ivtv: Registered v4l2 device for encoder radio minor 64
> ivtv: Create encoder radio stream
> ivtv: Registered v4l2 device for decoder MPEG minor 16
> ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
> ivtv: Registered v4l2 device for decoder VBI minor 228
> ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
> ivtv: Registered v4l2 device for decoder VOUT minor 232
> ivtv: Create decoder VOUT stream
> ivtv: Registered v4l2 device for decoder YUV minor 48
> ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total)
> ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
> ivtv: Setting Tuner 47
> tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
> saa7115: decoder set norm NTSC
> saa7115: set audio: 0x01
> saa7115: decoder set input (4)
> saa7115: now setting Composite input
> ivtv: Setting audio matrix to input 3, output 1
> ivtv: Switching standard to NTSC.
> saa7115: decoder set norm NTSC
> saa7115: set audio: 0x01
> saa7127: Setting Encoder Video Standard
> saa7127: Set NTSC Video Mode
> saa7127: Selecting NTSC video Standard
> ivtv: ivtv_enc_thread: pid = 4486, itv = 0xdf5626a0
> ivtv: ivtv_enc_vbi_thread: pid = 4487, itv = 0xdf5626a0
> ivtv: ivtv_dec_thread: pid = 4488, itv = 0xdf5626a0
> ivtv: ivtv_dec_vbi_thread: pid = 4489, itv = 0xdf5626a0
> saa7115: decoder disable output
> saa7115: decoder enable output
> ivtv: Initialized WinTV PVR 350, card #0
> ivtv: ==================== END INIT IVTV ====================
> ivtv_fb: module not supported by Novell, setting U taint flag.
> ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
> ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has
> 1704960 bytes.
> ivtv-osd: screen coords: [0 0] -> [720 480]
> ivtv-osd: original global alpha = 208
> ivtv-osd: current OSD state = 39
> ivtv-osd: new global alpha = 208 (1 255 0)
> ivtv-osd: framebuffer at 0xc9510000, mapped to 0xe0410000, size 1350k
> ivtv-osd: mode is 720x480x32, linelength=2880
> ivtv-osd: fb1: iTVC15 TV out frame buffer device
> ivtv: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB total)
>
>
> --
> Thanks Again,
>
> Joel Webb
> President and CEO
> PropBot.com L.L.C.
> Home of:
> PropBot.com
> TheCreativeInvestor.com
> AllYouCanRent.com
> SellAnyHouseQuick.com
> 703-778-5755 x101
--
Thanks Again,
Joel Webb
President and CEO
PropBot.com L.L.C.
Home of:
PropBot.com
TheCreativeInvestor.com
AllYouCanRent.com
SellAnyHouseQuick.com
703-778-5755 x101
xauth: creating new authority file /root/.serverauth.9235
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux marvin 2.6.13-15.7-default #1 Tue Nov 29
14:32:29 UTC 2005 i686
Build Date: 07 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 3 21:28:10 2006
(==) Using config file: "/etc/X11/xorg.conf"
(WW) ivtvdev: No matching Device section for instance (BusID PCI:0:11:0) found
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
xauth: creating new authority file /root/.serverauth.8757
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux marvin 2.6.13-15.7-default #1 Tue Nov 29
14:32:29 UTC 2005 i686
Build Date: 07 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 3 21:13:21 2006
(==) Using config file: "/etc/X11/xorg.conf"
(EE) LoadModule: Module ivtv-fb does not have a ivtv-fbModuleData data object.
(EE) Failed to load module "ivtv-fb" (invalid module, 0)
(EE) No devices detected.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
