On Feb 18, 2006, at 1:14 PM, Jim Gifford wrote: > Here is the Information for 0.4.3 from atrpms. Axel the last version > that worked was the 2.6.14 version 100 for me. > > > Linux video capture interface: v1.00 > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.4.3 (tagged release) loading > ivtv: Linux version: 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom: ivtv version > tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 2867052 > tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio processor = MSP4448 (type = 1b) > tveeprom: decoder processor = SAA7115 (type = 13) > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] > saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] > ivtv0: Failed to load module msp3400
This is killing it right here. Check for msp3400. I think you'll want the one from ivtv, not the kernel, so use the msp3400-ivtv alias line to get the one from atrpms. Keith C > tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02040024 > ivtv0 warning: Encoder Firmware can be buggy, use version > 0x02040011 or > 0x02050032. > ivtv0: Decoder revision: 0x02020023 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers > (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB > total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB > total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers > (2048KB > total) > ivtv0: Create encoder radio stream > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB > total) > ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB > total) > ivtv0: Create decoder VOUT stream > ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB > total) > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 > ivtv0 warning: i2c client addr: 0x40 not found for command 0x40086d11! > ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! > ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! > ivtv0 warning: i2c client addr: 0x40 not found for command 0x40085618! > ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! > ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! > ivtv0 warning: i2c client addr: 0x40 not found for command 0x402c5639! > spurious 8259A interrupt: IRQ7. > ivtv0 warning: i2c client addr: 0x40 not found for command 0x80287610! > ivtv0 warning: i2c client addr: 0x40 not found for command 0x40287611! > ivtv0: Initialized WinTV PVR 350, card #0 > ivtv: ==================== END INIT IVTV ==================== > ivtv0-osd: Framebuffer module loaded (attached to ivtv card id 0) > ivtv0-osd: screen coords: [0 0] -> [720 480] > ivtv0-osd: original global alpha = 208 > ivtv0-osd: current OSD state = 39 > ivtv0-osd: new global alpha = 208 (1 255 0) > ivtv0-osd: framebuffer at 0xe5510000, mapped to 0xf9810000, size 1665k > ivtv0-osd: mode is 720x480x32, linelength=2880 > ivtv0-osd warning: ivtvfb_set_par > Console: switching to colour frame buffer device 90x30 > ivtv0-osd: fb0: cx23415 TV out frame buffer device > ivtv0: Allocate DMA decoder OSD stream: 16 x 65536 buffers (1024KB > total) > > -- > ---- > Jim Gifford > [EMAIL PROTECTED] > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
