On Thursday 16 March 2006 22:49, Hansa wrote:
> I went ahead and installed a clean Linux version: 2.6.11-1.1369_FC4
> trying to find out if it makes any difference. I compared the ivtv
> init with the 2.6.15-1.1833_FC4 version (after shuffling some lines).
> The only difference it came up with was this..
> (v2.6.15)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> This didn't show up in v2.6.11
>
> (v1.6.11)
> wm8775 0-001b: ivtv driver
> This didn't show up in v2.6.15
>
> It probably means nothing but you never know. Below I'll included
> both outputs.
>
> Hans, it looks like the cx25840 driver isn't loaded. any chance to
> force load it?
modprobe cx25840 should load it. Or insmod /lib/modules/.../cx25840.ko
to REALLY force it.
Hans
> I can't imagine the card is broken. I'm converting my Windows
> Mediacenter box into a mythtv box. It worked the other day.
>
> Best Regards.
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.3 (tagged release) loading
> ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 9 (level,
> low) -> IRQ 9
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> tveeprom: The eeprom says no radio is present, but the tuner type 60
> tveeprom: indicates otherwise. I will assume that radio is present.
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 2993543
> tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom =
> 0x74, v4l2 = 0x00400e17)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> ivtv0 warning: i2c client addr: 0x44 not found for command
> 0xc008561c! wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> ivtv0: Create encoder radio stream
> tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by
> ivtv i2c driver #0
> ivtv0 warning: i2c client addr: 0x44 not found for command
> 0x40085618! ivtv0 warning: i2c client addr: 0x44 not found for
> command 0xc0045627! ivtv0 warning: i2c client addr: 0x44 not found
> for command 0x40046d11! ivtv0 warning: i2c client addr: 0x44 not
> found for command 0x40085618! ivtv0 warning: i2c client addr: 0x44
> not found for command 0xc008561c! ivtv0 warning: i2c client addr:
> 0x44 not found for command 0x40045613! ivtv0 warning: i2c client
> addr: 0x44 not found for command 0x402c5639! ivtv0 warning: i2c
> client addr: 0x44 not found for command 0x40045612! ivtv0 warning:
> i2c client addr: 0x44 not found for command 0xc008561c! ivtv0:
> Initialized WinTV PVR 150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.3 (tagged release) loading
> ivtv: Linux version: 2.6.11-1.1369_FC4 686 REGPARM 4KSTACKS gcc-4.0
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 9 (level,
> low) -> IRQ 9
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> tveeprom: The eeprom says no radio is present, but the tuner type 60
> tveeprom: indicates otherwise. I will assume that radio is present.
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 2993543
> tveeprom: tuner = LG S001D MK3 (idx = 60, type = 38)
> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom =
> 0x74, v4l2 = 0x00400e17)
> tveeprom: audio processor = CX25843 (type = 25)
> tveeprom: decoder processor = CX25843 (type = 1e)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> ivtv0 warning: i2c client addr: 0x44 not found for command
> 0xc008561c! wm8775 0-001b: ivtv driver
> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> ivtv0: Create encoder radio stream
> tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by
> ivtv i2c driver #0
> ivtv0 warning: i2c client addr: 0x44 not found for command
> 0x40085618! ivtv0 warning: i2c client addr: 0x44 not found for
> command 0xc0045627! ivtv0 warning: i2c client addr: 0x44 not found
> for command 0x40046d11! ivtv0 warning: i2c client addr: 0x44 not
> found for command 0x40085618! ivtv0 warning: i2c client addr: 0x44
> not found for command 0xc008561c! ivtv0 warning: i2c client addr:
> 0x44 not found for command 0x40045613! ivtv0 warning: i2c client
> addr: 0x44 not found for command 0x402c5639! ivtv0 warning: i2c
> client addr: 0x44 not found for command 0x40045612! ivtv0 warning:
> i2c client addr: 0x44 not found for command 0xc008561c! ivtv0:
> Initialized WinTV PVR 150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
