On Wednesday 24 May 2006 13:43, Andrew Lyon wrote:
> Hi,
>
> I have a PVR 150 card and always get error "ivtv0 warning: 1000 ms
> time out waiting for firmware", my system is a shuttle st62k with
> celeron 2.8ghz and 1gb ram, I have tried the following combinations
> of kernel and ivtv versions:
>
> 2.6.16-gentoo-r6 +ivtv 0.6.2
> 2.6.16-gentoo-r7 +ivtv 0.6.2
>
> 2.6.15-gentoo-r1 + ivtv 0.4.0 (gentoo portage)
> 2.6.15-gentoo-r1 + ivtv 0.4.2 (gentoo portage)
>
> 2.6.15-gentoo-r1 + ivtv 0.4.5
> 2.6.15-gentoo-r1 + ivtv svn tarball
>
> I've tried different firmware vesions but that doesnt make any
> difference..
I recommend testing your card under Windows. It could be broken.
Hans
>
> Here is the full ivtv dmesg using 0.4.5:
>
> vtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.5 (tagged release) loading
> ivtv: Linux version: 2.6.15-gentoo-r1 PENTIUM4 gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKD] -> GSI 5 (level,
> low) -> IRQ 5
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 26039, rev = C155, serial# = 7860791
> tveeprom: tuner = Philips FQ1216ME MK3 (idx = 55, type = 38)
> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom =
> 0x74, v4l2 = 0x00400e17)
> tveeprom: audio processor = CX25842 (type = 24)
> tveeprom: decoder processor = CX25842 (type = 1d)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> cx25840 0-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0 warning: 1000 ms time out waiting for firmware
> ivtv0 warning: Failed api call 0x00000080 with result 0xfffffff0
> ivtv0 warning: Encoder firmware dead!
> ivtv0: Error initializing firmware
> ivtv0: Error 0 on initialization
> ivtv: ==================== END INIT IVTV ====================
>
> Anybody have any suggestions?
>
> Thanks
> Andy
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
