john smith wrote:
> Hi I have a PVR150 on FC4 and when I try to watch live TV all i get is snow 
> on all channels. I read that this is cause my tuner type is not set but i 
> dont know how to do that?
>  
>  
>  Linux video capture interface: v1.00
>  ivtv:  ==================== START INIT IVTV ====================
>  ivtv:  version 0.6.2 (development snapshot compiled on Mon May 22 01:15:49 
> 2006) loading
>  ivtv:  Linux version: 2.6.16-1.2111_FC4 686 REGPARM 4KSTACKS gcc-4.0
>  ivtv:  In case of problems please include the debug info between
>  ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
>  ivtv:  any module options, when mailing the ivtv-users mailinglist.
>  ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>  AMD756: dev 4444:0016, router pirq : 1 get irq :  9
>  PCI: Found IRQ 9 for device 0000:00:08.0
>  tveeprom 1-0050: Hauppauge model 26582, rev F0B2, serial# 9454537
>  tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4)
>  tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
>  tveeprom 1-0050: audio processor is CX25843 (idx 37)
>  tveeprom 1-0050: decoder processor is CX25843 (idx 30)
>  tveeprom 1-0050: has no radio, has no IR remote
>  tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>  cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>  AMD756: dev 10b7:9200, router pirq : 4 get irq : 10
>  PCI: Found IRQ 10 for device 0000:00:0b.0
>  PCI: Sharing IRQ 10 with 0000:00:07.4
>  cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>  wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>  ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
>  ivtv0: Encoder revision: 0x02050032
>  ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
>  ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
>  ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
>  ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB 
> total)
>  tuner 1-0061: tuner type not set
>  tuner 1-0061: tuner type not set
>  ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
>  ivtv:  ====================  END INIT IVTV  ====================
>  
> 
>  __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users


_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to