amd64 SuSE 10.1 ivtv-0.6.3 I have good video and no sound. In the past 0.4.x was easy most of the time was to remove the original msp3400 and reinstall or replace it with the one from ivtv. With this new version of SuSE and ivtv 0.6.3 I do not find the msp3400 any place. For what follow show it can not load msp3400. Thank you for any help -=terry=-
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.3 (development snapshot compiled on Sun 18 Jun 2006 10:57:01 AM MDT) loading ivtv: Linux version: 2.6.16.13-4-default gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 23 sharing vector 0x52 and IRQ 23 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 82 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 2-0050: Hauppauge model 48132, rev J123, serial# 6190288 tveeprom 2-0050: tuner model is Philips FM1236 (idx 23, type 2) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is MSP4448 (idx 27) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR remote Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) ivtv0: Failed to load module msp3400 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Decoder revision: 0x02020023 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv0: Create decoder VOUT stream ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c addr 0x40 not found for command 0x40086d11! ivtv0: i2c addr 0x40 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
