I have just installed ivtv per the instructions located here: http://ivtvdriver.org/index.php/Howto:Ubuntu
My system is Kubuntu 6.06 Dapper Drake using the k7 kernel. uname -a Linux hermes 2.6.15-26-k7 #1 SMP PREEMPT Mon Jul 17 20:36:04 UTC 2006 i686 GNU/Linux I have placed the firmware files in /lib/firmware and in /usr/lib/hotplug/firmware but I still get errors when loading the modules: [17193581.064000] ivtv: ==================== START INIT IVTV ==================== [17193581.064000] ivtv: version 0.4.6 (tagged release) loading [17193581.064000] ivtv: Linux version: 2.6.15-26-k7 SMP preempt K7 gcc-4.0 [17193581.068000] ivtv: In case of problems please include the debug info between [17193581.068000] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [17193581.068000] ivtv: any module options, when mailing the ivtv-users mailinglist. [17193581.068000] ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) [17193581.068000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 50 [17193581.160000] tveeprom: ivtv version [17193581.160000] tveeprom: Hauppauge: model = 26552, rev = F0A3, serial# = 8374467 [17193581.160000] tveeprom: tuner = TCL MFNM05-4 (idx = 103, type = 43) [17193581.160000] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) [17193581.160000] tveeprom: audio processor = CX25843 (type = 25) [17193581.160000] tveeprom: decoder processor = CX25843 (type = 1e) [17193581.160000] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] [17193581.188000] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 [17193581.188000] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] [17193581.512000] cx25840 3-0044: ivtv driver [17193581.512000] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [17193581.568000] cx25840 3-0044: unable to open firmware v4l-cx25840.fw [17193581.700000] ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] [17193581.756000] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) [17193581.772000] ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] [17193581.804000] tda9887 3-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) [17193581.804000] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] [17193582.436000] ivtv0: unable to open firmware v4l-cx2341x-enc.fw [17193582.436000] ivtv0: did you put the firmware in the hotplug firmware directory? [17193582.436000] ivtv0 warning: failed loading encoder firmware [17193582.436000] ivtv0 warning: Error loading firmware -3! [17193582.436000] ivtv0: Error -3 initializing firmware. [17193582.444000] ivtv0: Error -12 on initialization [17193582.444000] ivtv: probe of 0000:02:00.0 failed with error -12 [17193582.444000] ivtv: ==================== END INIT IVTV ==================== Does anyone know how I can determine where it is looking for the firmware files? Thanks, Rob Heilman _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
