Michael/List, How did you create the msp3400 module (did you use the old one from the modules directory)? When I make/mke instal IVTV 0.4.6 it doesn’t create that module?
Thanks. - Matt -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Dale Sent: Thursday, September 14, 2006 10:03 AM To: [email protected] Subject: Re: [ivtv-users] PVR 150 IVTV 0.4.6, Video but no audio thanks that fixed it ( copied over the msp3400 module) Also running the 108 firmware instead of the most most recent version seemed to work better. --michael Hans Verkuil wrote: > On Tuesday 05 September 2006 19:25, Michael Dale wrote: > >> I appear to have the same issue with pvr 250s and IVTV 0.4.6 Driver. >> Video comes in fine but no audio. >> sample #cat /dev/video0 > >> http://metavidcap.ucsc.edu/raw_mpeg2/ivtv0.4.6_no_audio.mpg >> >> dmesg | tac | >> sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV =/p; >> /= START INIT IVTV =/q' | >> tac >> >> >> ivtv: version 0.4.6 (tagged release) loading >> ivtv: Linux version: 2.6.15-1.1833_FC4 gcc-4.0 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) GSI 20 sharing >> vector 0xC9 and IRQ 20 >> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 201 >> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >> tveeprom: ivtv version >> tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 7758111 >> tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) >> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) >> tveeprom: audio processor = MSP4448 (type = 1b) >> tveeprom: decoder processor = SAA7115 (type = 13) >> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner >> (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 >> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >> saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) >> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] >> ivtv0: Failed to load module msp3400 >> > ^^^^^^^^^^^^^^^^^^^^^^ > > You're missing the msp3400 module for some reason. Since it takes care > of audio it's no wonder you don't have any sound. > > Hans > > >> tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) >> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> ivtv0: Encoder revision: 0x02050032 >> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers >> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 >> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: >> 455 x 4608 buffers (2048KB total) >> ivtv0: Create encoder radio stream >> tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 >> ivtv0 warning: i2c client addr: 0x40 not found for command >> 0x40086d11! ivtv0 warning: i2c client addr: 0x40 not found for >> command 0x80287610! ivtv0 warning: i2c client addr: 0x40 not found >> for command 0x40287611! ivtv0 warning: i2c client addr: 0x40 not >> found for command 0x40085618! ivtv0 warning: i2c client addr: 0x40 >> not found for command 0x80287610! ivtv0 warning: i2c client addr: >> 0x40 not found for command 0x40287611! ivtv0 warning: i2c client >> addr: 0x40 not found for command 0x402c5639! ivtv0 warning: i2c >> client addr: 0x40 not found for command 0x80287610! ivtv0 warning: >> i2c client addr: 0x40 not found for command 0x40287611! ivtv0: >> Initialized WinTV PVR 250, card #0 >> ivtv: ====================== NEXT CARD ====================== >> ivtv1: Autodetected WinTV PVR 250 card (cx23416 based) GSI 21 sharing >> vector 0xD1 and IRQ 21 >> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 209 >> ivtv1: Unreasonably low latency timer, setting to 64 (was 32) >> tveeprom: ivtv version >> tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 7881541 >> tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) >> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) >> tveeprom: audio processor = MSP4448 (type = 1b) >> tveeprom: decoder processor = SAA7115 (type = 13) >> ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner >> (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 >> ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] >> saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) >> ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21] >> tda9887 2-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #1) >> ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] >> ivtv1: Failed to load module msp3400 >> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >> ivtv1: Encoder revision: 0x02050032 >> ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >> total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers >> (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 >> buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: >> 455 x 4608 buffers (2048KB total) >> ivtv1: Create encoder radio stream >> tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1 >> ivtv1 warning: i2c client addr: 0x40 not found for command >> 0x40086d11! ivtv1 warning: i2c client addr: 0x40 not found for >> command 0x80287610! ivtv1 warning: i2c client addr: 0x40 not found >> for command 0x40287611! ivtv1 warning: i2c client addr: 0x40 not >> found for command 0x40085618! ivtv1 warning: i2c client addr: 0x40 >> not found for command 0x80287610! ivtv1 warning: i2c client addr: >> 0x40 not found for command 0x40287611! ivtv1 warning: i2c client >> addr: 0x40 not found for command 0x402c5639! ivtv1 warning: i2c >> client addr: 0x40 not found for command 0x80287610! ivtv1 warning: >> i2c client addr: 0x40 not found for command 0x40287611! ivtv1: >> Initialized WinTV PVR 250, card #1 >> ivtv: ==================== END INIT IVTV ==================== >> >> lspci -v >> >> >> 00:06.0 Multimedia video controller: Internext Compression Inc iTVC16 >> (CX23416) MPEG-2 Encoder (rev 01) >> Subsystem: Hauppauge computer works Inc.: Unknown device 4801 >> Flags: bus master, medium devsel, latency 64, IRQ 201 >> Memory at c8000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [44] Power Management version 2 >> >> 00:08.0 Multimedia video controller: Internext Compression Inc iTVC16 >> (CX23416) MPEG-2 Encoder (rev 01) >> Subsystem: Hauppauge computer works Inc.: Unknown device 4801 >> Flags: bus master, medium devsel, latency 64, IRQ 209 >> Memory at c4000000 (32-bit, prefetchable) [size=64M] >> Capabilities: [44] Power Management version 2 >> >> >> 00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host >> Bridge (rev 01) >> Subsystem: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host >> Bridge Flags: bus master, 66Mhz, medium devsel, latency 8 >> Memory at d0000000 (32-bit, prefetchable) [size=128M] >> Capabilities: [80] AGP version 3.0 >> Capabilities: [c0] HyperTransport: Slave or Primary Interface >> Capabilities: [68] Power Management version 2 >> Capabilities: [58] HyperTransport: Interrupt Discovery and >> Configuration >> >> --michael >> >> G. Jagadish wrote: >> >>> Hi, >>> >>> I'm using FC3 with 2.6.12-1_1381 Kernel and PVR 150 card with IVTV >>> 0.4.6 Driver. >>> >>> I'm getting only video and no audio. pls help me in this, >>> >>> modprobe.conf >>> ------------------------ >>> alias eth0 8139too >>> alias scsi_hostadapter ata_piix >>> alias snd-card-0 snd-intel8x0 >>> options snd-card-0 index=0 >>> install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && >>> /usr/sbin/alsactl restore >/dev/null 2>&1 || : >>> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : >>> ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0 alias >>> usb-controller ehci-hcd alias usb-controller1 uhci-hcd alias >>> char-major-81 ivtv >>> -------------------------- >>> >>> ivtv: ==================== START INIT IVTV ==================== >>> ivtv: version 0.4.6 (tagged release) loading >>> ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS >>> gcc-3.4 ivtv: In case of problems please include the debug info >>> between ivtv: the START INIT IVTV and END INIT IVTV lines, along >>> with ivtv: any module options, when mailing the ivtv-users >>> mailinglist. ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) >>> ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 10 (level, >>> low) -> IRQ 10 >>> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >>> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] >>> tveeprom: Hauppauge: model = 26139, rev = G1A5, serial# = 9533907 >>> tveeprom: tuner = <unknown> (idx = 105, type = -1069826176) >>> tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) >>> tveeprom: audio_processor = MSP3400C (type = 4) >>> ivtv0: Corrected autodetection from WinTV PVR 250 to WinTV PVR 150 >>> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >>> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: >>> ivtv driver cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver >>> #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) >>> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] >>> wm8775 1-001b: ivtv driver >>> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] >>> tda9885/6/7: chip found @ 0x86 >>> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] >>> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>> ivtv0: Encoder revision: 0x02050032 >>> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB >>> total) >>> ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB >>> total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers >>> (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x >>> 4608 buffers (2048KB total) >>> ivtv0: Create encoder radio stream >>> tuner 1-0061: tuner type not set >>> ivtv0: Initialized WinTV PVR 150, card #0 >>> ivtv: ==================== END INIT IVTV ==================== >>> >>> ------------------------------------------------------ >>> >>> Thanx in Advance >>> Jagadish >>> ------------------------------------------------------------------- >>> ----- >>> >>> _______________________________________________ >>> ivtv-users mailing list >>> [email protected] >>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >>> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.4/449 - Release Date: 9/15/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.4/449 - Release Date: 9/15/2006 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
