Rajesh Perumal wrote: [...] > > I have noticed that one of the modules isn't loading: > "unable to open firmware v4l-cx2341x-init.mpg" and i've done some > > searches on archives and found that there should be a copy of this file > in /lib/firmware and then symlinks everywhere else. I have done this > and ensured that there are full rights to the file but it still won't > load the module. [...] > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
Where are these 2 above located? v4l-cx2341x-init.mpg should be in the same directory. Also what is it's file size? [...] > ivtv0: unable to open firmware v4l-cx2341x-init.mpg > ivtv0: did you put the firmware in the hotplug firmware directory? > ivtv0: failed to read mpeg decoder initialisation file v4l-cx2341x-init.mpg > tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ==================== END INIT IVTV ==================== > > # ivtv modules setup > alias char-major-61 lirc_i2c > alias char-major-81 videodev > alias char-major-81-0 ivtv > options ivtv tuner=2 > options msp3400 once=0 simpler=1 simple=0 The 2 options above should be removed. Ivtv's auto detect will recognize your pvr-350. Greets Sander _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
