On Oct 12, 2006, at 5:56 PM, Jan Vilhuber wrote: > > On Oct 11, 2006, at 10:53 PM, Hans Verkuil wrote: > >> Jan, >> >> Can you check this card under Windows first? > > Not really. I don't have a windows box. This same card works fine > under 0.4.7..
And now all of a sudden it stopped working even on 0.4.7! So you seem to be correct in that it might be a bad card. Time to contact hauppauge again. jan > Well, as fine as these shittty pvr500's work in any case. > > jan > > > >> Looks like hardware >> troubles. >> >> Regards, >> >> Hans >> >> On Thursday 12 October 2006 03:47, Jan Vilhuber wrote: >>> Second try... >>> >>>> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>>> tveeprom 3-0050: Huh, no eeprom present (err=-121)? >>>> tveeprom 3-0050: Encountered bad packet header [bc]. Corrupt or not >>>> a Hauppauge eeprom. >>>> ivtv1: No tuner detected, default to NTSC >>> >>> jan >>> >>> On Oct 10, 2006, at 4:56 PM, Jan Vilhuber wrote: >>>> Just installed 2.6.18 on suse 10.1, as well as ivtv-0.8.0, and I >>>> get the following: >>>> >>>> Linux video capture interface: v2.00 >>>> ivtv: ==================== START INIT IVTV ==================== >>>> ivtv: version 0.8.0 (tagged release) loading >>>> ivtv: Linux version: 2.6.18-default mod_unload K7 REGPARM gcc-4.1 >>>> ivtv: In case of problems please include the debug info between >>>> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >>>> ivtv: any module options, when mailing the ivtv-users mailinglist. >>>> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) >>>> ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 >>>> (level, high) -> IRQ 185 >>>> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>>> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) >>>> cx25840 2-0044: loaded v4l-cx25840.fw firmware (12282 bytes) >>>> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) >>>> tveeprom 2-0050: Hauppauge model 23552, rev D587, serial# 8898084 >>>> tveeprom 2-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type >>>> 70) >>>> tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) >>>> tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio >>>> (idx 101, type 62) >>>> tveeprom 2-0050: audio processor is CX25843 (idx 37) >>>> tveeprom 2-0050: decoder processor is CX25843 (idx 30) >>>> tveeprom 2-0050: has radio, has no IR remote >>>> ivtv0: This is the first unit of a PVR500 >>>> tuner 2-0060: TEA5767 detected. >>>> tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) >>>> tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) >>>> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) >>>> ivtv0: Encoder revision: 0x02050032 >>>> ivtv0: Registered device video0 for encoder MPEG >>>> ivtv0: Registered device video32 for encoder YUV >>>> ivtv0: Registered device vbi0 for encoder VBI >>>> ivtv0: Registered device video24 for encoder PCM audio >>>> ivtv0: Registered device radio0 for encoder radio >>>> tuner 2-0061: type set to 70 (Samsung TCPN 2121P30A) >>>> ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 >>>> ivtv: ====================== NEXT CARD ====================== >>>> ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) >>>> ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 >>>> (level, high) -> IRQ 217 >>>> ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>>> tveeprom 3-0050: Huh, no eeprom present (err=-121)? >>>> tveeprom 3-0050: Encountered bad packet header [bc]. Corrupt or not >>>> a Hauppauge eeprom. >>>> ivtv1: No tuner detected, default to NTSC >>>> ivtv1: Encoder revision: 0x02050032 >>>> ivtv1: Registered device video1 for encoder MPEG >>>> ivtv1: Registered device video33 for encoder YUV >>>> ivtv1: Registered device vbi1 for encoder VBI >>>> ivtv1: Registered device video25 for encoder PCM audio >>>> ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! >>>> ivtv1: i2c addr 0x44 not found for command 0x4008646f! >>>> ivtv1: i2c hardware 0x00000020 not found for command 0x4008646d! >>>> ivtv1: i2c hardware 0x00000001 not found for command 0x4008646d! >>>> ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! >>>> ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! >>>> ivtv1: i2c hardware 0x00000001 not found for command 0xc008561c! >>>> ivtv1: Initialized Hauppauge WinTV PVR-150, card #1 >>>> ivtv: ==================== END INIT IVTV ==================== >>>> [EMAIL PROTECTED]:~/src/ivtv-0.8.0> >>>> >>>> Indeed the second tuner doesn't do anything, i.e. "cat /dev/video1 >>>> >>>>> foo.mpg" gives me an empty file. >>>> >>>> Any clues? >>>> jan >>> >>> _______________________________________________ >>> ivtv-users mailing list >>> [email protected] >>> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
