Hi, I use a kernel 2.6.18, 'handmade', and ivtv driver 0.8.2 I placed firmware in /usr/lib/hotplug/firmware.
I get this message, when booting: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.2 (tagged release) loading ivtv: Linux version: 2.6.18.05022007 SMP mod_unload 686 REGPARM gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 262144 bytes) ivtv0: did you put the firmware in the hotplug firmware directory? ivtv0 warning: failed loading encoder firmware ivtv0 warning: Error loading firmware -3! ivtv0: Error -3 initializing firmware. ivtv0: Error -12 on initialization ivtv: probe of 0000:02:01.0 failed with error -12 ivtv: ==================== END INIT IVTV ==================== If I 'rmmod ivtv', and 'modprobe ivtv', the firmware is loaded, and the drivers works. So I know, the driver is ok and the firmware. There is no hotplug-agent in /usr/lib/hotplug, which couldn't probably coexist with udev, vers. 103. Maybe the problem is close to that, but I have no good idea to solve it. I'm grateful for help. Thank You Ronald Hitz -- Ronald Hitz _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
