I'm having some quality issues with my PVR-150. The driver loads and I can use the card. The problem I'm having is that the picture will flicker with parts of previous frames still hanging around. Sometimes it's part of the lower half of the picture flickering in the top. This problem only started after I upgraded to Ubuntu Feisty. When I was using Ubuntu Edgy things worked perfectly fine. I've tried the drivers supplied with the distro (0.9) and the latest from the ivtv site (0.10.1), both with the same result.
Any suggestions? Thanks, robert My dmesg: [ 31.373342] ivtv: ==================== START INIT IVTV ==================== [ 31.373346] ivtv: version 0.10.1 (tagged release) loading [ 31.373348] ivtv: Linux version: 2.6.20-11-lowlatency SMP preempt mod_unload 586 [ 31.373351] ivtv: In case of problems please include the debug info between [ 31.373353] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 31.373355] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 31.373454] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 31.373779] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 31.373789] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20 [ 31.373799] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 31.422076] nvidia: module license 'NVIDIA' taints kernel. [ 32.078429] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 32.297897] ivtv0: Encoder revision: 0x02050032 [ 32.297900] ivtv0: Recommended firmware version is 0x02060039. [ 32.364416] tveeprom 2-0050: Hauppauge model 26552, rev C268, serial# 8754482 [ 32.364420] tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) [ 32.364424] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) [ 32.364426] tveeprom 2-0050: audio processor is CX25843 (idx 37) [ 32.364428] tveeprom 2-0050: decoder processor is CX25843 (idx 30) [ 32.364430] tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter [ 32.364433] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 32.381300] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 32.381330] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 32.385815] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 32.423883] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 36.800397] cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes) [ 36.918677] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 36.987157] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 36.987352] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 36.987586] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 36.987669] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 36.987888] ivtv0: Registered device radio0 for encoder radio [ 36.987907] tuner 2-0061: type set to 47 (LG NTSC (TAPE series)) [ 37.391816] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 37.391834] ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
