On wo, 2007-05-02 at 11:35 -0400, Brian Walter wrote:
> Greetings,
> 
> I'm working on getting the last few issues cleaned up with a MythTV 
> setup.  One of the issues I have, is that whenever I access the first 
> tuner on my PVR-500, I get a series of DMA warnings/errors:
> 
> May  1 00:06:08 mythtvserver1 kernel: ivtv1 warning: ENC DMA ERROR b
> May  1 00:06:08 mythtvserver1 kernel: ivtv1 warning: encoder MPEG: 
> offset 0 -> 128
> May  1 00:06:08 mythtvserver1 kernel: ivtv1 warning: encoder MPEG: 
> offset 128 -> 104
> May  1 00:06:10 mythtvserver1 kernel: ivtv1 warning: ENC DMA ERROR b
> May  1 00:06:10 mythtvserver1 kernel: ivtv1 warning: encoder MPEG: 
> offset 104 -> 128
> May  1 00:06:10 mythtvserver1 kernel: ivtv1 warning: encoder MPEG: 
> offset 128 -> 36
> May  1 00:06:15 mythtvserver1 kernel: ivtv1 warning: ENC DMA ERROR b
> May  1 00:06:15 mythtvserver1 kernel: ivtv1 warning: encoder MPEG: 
> offset 36 -> 128
> May  1 00:06:15 mythtvserver1 kernel: ivtv1 warning: encoder MPEG: 
> offset 128 -> 0
> May  1 00:06:22 mythtvserver1 kernel: ivtv1 warning: ENC DMA ERROR b
> May  1 00:06:22 mythtvserver1 kernel: ivtv1 warning: encoder MPEG: 
> offset 0 -> 128
> May  1 00:06:22 mythtvserver1 kernel: ivtv1: DMA TIMEOUT 00000001 0
> 
> Now, the above seems to only to occur on ivtv1 (the first tuner of the 
> pvr-500).  I also have a pvr-150 installed, which consumes ivtv0 (video0).
> 
> With video0 in use (recording), if I cat from video1 (first tuner), I 
> almost immediately  get the above.  If I then turn around and cat from 
> video2 (second tuner), it works fine with no errors.
> 
> I notice that all three ivtv devices are currently on the same 
> interrupt.  Is this a cause for concern?

I am not sure but try and change it anyway.

> Would moving the cards impact this (the problem, not the interrupts)?

This is always good to try.

> Indications of a bad board?

Maybe because it only happens on the first tuner and not the second.

The best way to make sure the card is not bad is to try it under
windows. So if it also does not work in windows you are sure the card is
bad.

Greets
Sander


_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to