I bought the card one week ago and I can't seem to find any channel. I live in The Netherlands and my coax cable is fine. My distro is Kubuntu 7.04
I've posted some info at the mythtvtalk.com forum: http://www.mythtvtalk.com/forum/viewtopic.php?p=25088 Here is my dmesg dump: [ 16.503506] ivtv: ==================== START INIT IVTV ==================== [ 16.524066] ivtv: version 0.10.1 (tagged release) loading [ 16.544475] ivtv: Linux version: 2.6.20-16-generic SMP mod_unload 586 [ 16.565032] ivtv: In case of problems please include the debug info between [ 16.585740] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 16.606647] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 16.627754] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 16.648742] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 16.680211] agpgart: Detected an Intel 965G Chipset. [ 16.714463] agpgart: AGP aperture is 256M @ 0x0 [ 16.799532] usbcore: registered new interface driver hiddev [ 16.935982] input: Logitech Logitech BT Mini-Receiver as /class/input/input2 [ 16.957577] input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-1.2 [ 17.044848] input: Logitech Logitech BT Mini-Receiver as /class/input/input3 [ 17.067040] input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.1-1.3 [ 17.089657] usbcore: registered new interface driver usbhid [ 17.112211] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 17.162441] nvidia: module license 'NVIDIA' taints kernel. [ 17.437094] parport: PnPBIOS parport detected. [ 17.460257] Attansic L1 Ethernet Network Driver - version 2.0.6 [ 17.460359] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 17.506138] Copyright(c) 2005-2006 Attansic Corporation. [ 17.544621] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 17.567764] Uniform CD-ROM driver Revision: 3.20 [ 17.590716] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 17.685453] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 17.923830] ivtv0: Encoder revision: 0x02060039 [ 18.010632] tveeprom 0-0050: The eeprom says no radio is present, but the tuner type [ 18.033016] tveeprom 0-0050: indicates otherwise. I will assume that radio is present. [ 18.033018] tveeprom 0-0050: Hauppauge model 26589, rev C9A5, serial# 9476284 [ 18.033020] tveeprom 0-0050: tuner model is TCL MPE05-2 (idx 105, type 38) [ 18.033023] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 18.033025] tveeprom 0-0050: audio processor is CX25843 (idx 37) [ 18.033026] tveeprom 0-0050: decoder processor is CX25843 (idx 30) [ 18.033028] tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter [ 18.033030] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 18.234831] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 18.258536] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 18.286649] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 18.346672] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 23.398311] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 23.547524] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 23.638793] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 23.662625] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 23.686489] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 23.710098] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 23.733761] ivtv0: Registered device radio0 for encoder radio [ 23.757069] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 24.188177] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 24.211674] ivtv: ==================== END INIT IVTV ==================== Thanks in advance, Robin Bultot _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
