Richard Konrad wrote:
> I've recently bought an Hauppauge 150 card and am testing it to make
> sure it's working fine. I've googled and tried to use every script
> and command (using transcode, mencoder, ffmpeg) I could find and have
> only come up with errors. The only way I can record is through "cat
> /dev/video0 > ~/[file].mpg" As an example, I used "mencoder tv:// -tv
> driver=v4l2:width=640:height=480:fps=90:device=/dev/video0 -nosound
> -ovc lavc -lavcopts vcodec=mjpeg -o cooking.avi" The result printout
> is below:
>
Wrong command line option :)
from the mplayer man page:
-pvr <option1:option2:...> (PVR only)
This option tunes various encoding properties of the PVR
capture module. It has to be used with any hardware
MPEG encoder based card supported by the V4L2 driver.
The Hauppauge WinTV PVR-150/250/350/500 and all IVTV
based cards are known as PVR capture cards. Be aware that
only Linux 2.6.18 kernel and above is able to handle
MPEG stream through V4L2 layer. For hardware capture of
an MPEG stream and watching it with MPlayer/MEncoder,
use 'pvr://' as a movie URL.
Rudy
>
>
> Any help is appreciated
>
> Richard
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
