On Tue, Mar 4, 2008 at 10:28 AM, Steve Engman <[EMAIL PROTECTED]> wrote:
> Hi,
>  I'm trying to get my Hauppauge WinTV PVR-250 to work, but I only get loads 
> of "DMA TIMEOUT 00000003 0" messages and accordingly the LifeTV and 
> recordings are more than choppy.
>  I've followed the suggestions on this mailing list (like setting DMA in BIOS 
> and hdparm, changing PCI latencies and buffers, using different kernel and 
> ivtv versions), but nothing helps. Right now I'm on 2.6.24 with ivtv version 
> 1.1.0.
>  My server has a Compact Flash card as hda, which apparently doesn't support 
> DMA. But all ivtv streams go to/via a "real" hard disk (hdc or hdd) on the 
> second IDE controller. If I understand dmesg correctly, they're running in 
> DMA mode, but PIO is also mentioned.
>  Could there be an issue?
>  Any help is appreciated!
>  Cheers,
>  Steve
>
>  ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at  PCI slot 0000:00:14.1
>  PIIX4: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:DMA, hdd:DMA
>  Probing IDE interface ide0...
>  hda: RITEK MODEL, ATA DISK drive
>  hda: applying conservative PIO "downgrade"
>  hda: host max PIO4 wanted PIO255(auto-tune) selected PIO1
>  hda: MWDMA2 mode selected
>  ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  Probing IDE interface ide1...
>  hdc: ST3250820A, ATA DISK drive
>  hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>  hdc: UDMA/33 mode selected
>  hdd: WDC WD2000JB-00FUA0, ATA DISK drive
>  hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>  hdd: UDMA/33 mode selected
>  ide1 at 0x170-0x177,0x376 on irq 15
>
I doubt that this has anything to do with your problem. I have
mentioned PIO mode several times in this list but I was talking about
using PIO instead of DMA with your ivtv driver.

John

_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to