J McBride wrote:
Thanks, I tried the older changeset, and seemed to get a little further. Here is the result: dmesg |grep cx18 cx18: Start initialization, version 1.3.0 cx18-0: Initializing card 0 cx18-0: Autodetected Hauppauge card cx18 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx18-0: cx23418 revision 01010000 (B) cx18-0: Autodetected Hauppauge HVR-1600 cx18-0: Simultaneous Digital and Analog TV capture supported IRQ 20/cx18-0: IRQF_DISABLED is not guaranteed on shared IRQs tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0) cx18-0: Registered device video0 for encoder MPEG (64 x 32.00 kB) DVB: registering new adapter (cx18) cx18-0: DVB Frontend registered cx18-0: Registered DVB adapter0 for TS (32 x 32.00 kB) cx18-0: Registered device video32 for encoder YUV (20 x 101.25 kB) cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes) cx18-0: Registered device video24 for encoder PCM audio (256 x 4.00 kB) cx18-0: Initialized card: Hauppauge HVR-1600 cx18: End initialization cx18 0000:03:05.0: firmware: requesting v4l-cx23418-cpu.fw cx18-0: Unable to open firmware v4l-cx23418-cpu.fw cx18-0: Did you put the firmware in the hotplug firmware directory? cx18-0: Retry loading firmware cx18 0000:03:05.0: firmware: requesting v4l-cx23418-cpu.fw cx18-0: Unable to open firmware v4l-cx23418-cpu.fw cx18-0: Did you put the firmware in the hotplug firmware directory?
Looks like you're missing the firmware. I think what you need is to download the following: http://dl.ivtvdriver.org/ivtv/firmware/cx18-firmware.tar.gz Untar and put the .fw files in /lib/firmware. FMI, see: http://www.ivtvdriver.org/index.php/Cx18#Firmware FWIW, I use the mythbuntu variant of ubuntu and these files were automatically installed for me. On mythbuntu/ubuntu, they come from the linux-firmware package. HTH, Helen _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
