On Sun, 09 Jan 2005 18:20:04 +0000, Jonathan Lane <[EMAIL PROTECTED]> wrote: > I was doing really well, in my opinion, upgrading from an FC1 system to FC3 > for MythTV until I got to the stage of wanting to run X on the PVR 350 > output. I can't get the IVTV drivers to autoload. i'm following Jareds guide > but when I get to: > > mkinitrd -f --with=tveeprom --with=saa7115 --with=tuner --with=7127 > --with=ivtv --with=ivtv --with=ivtv-fb /boot/initrd-`uname -r`.img `uname > -r` > > it appears to work but when I reboot I get the following messages when it > tries to load the driver: > > ivtv: Error -3 initialising firmware > ivtv: Error -12 on initilaisation > ivtv-osd: ivtv_fb_card_id is out of range (valid range:0--1) > insmod: error inserting '/lib/ivtv-fb.ko': (operation not permitted) >
Afaik, that step is only necessary if you want the Red Hat Graphical Boot to display on your TV. WRT getting the driver to autoload, it won't. You'll have to fudge it somewhere (read on about setting up lirc, the line he advises you add to the init.d script will do it). I tried setting it up on FC3, and I found many things just don't work properly. IMHO, the best solution is to downgrade to FC2.. at least for now.. -- Ian Trider [EMAIL PROTECTED] ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Ivtv-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-users
