2018年4月20日金曜日 22時51分53秒 UTC+9 Francois Ozog: > HI, > > > Did you do the test with the main Linux, jailhouse not started? so that you > first validate that the complete communication chain works. > > > In addition to UART_BASE you also have a UART_DIVIDER option that controls > setting of the baud rate. > > > FF > > > On 20 April 2018 at 10:39, Chung-Fan Yang <[email protected]> wrote: > 2018年4月20日金曜日 17時27分46秒 UTC+9 Ralf Ramsauer: > > > On 04/20/2018 10:23 AM, Chung-Fan Yang wrote: > > > > I can get the Jailhouse to output on SOL now, but apic-demo still prints > > > nothing. > > > > I did see it went up into running from jailhouse's debug information. > > > > > > > Did you set the correct UART_BASE in inmates/lib/x86/printk.c? > > > > > > Ralf > > > > This is the problem. > > I set it to 0x2f8 now, and getting the print outs. > > > > Thank you, Ralf > > > > Yang > > > > > > -- > > You received this message because you are subscribed to the Google Groups > "Jailhouse" group. > > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > > > > > > > > > > François-Frédéric Ozog | Director Linaro Networking GroupT: +33.67221.6485 > [email protected] | Skype: ffozog
Hi, I did check the communication channel without jailhouse. The problem was that I messed up with the generated sysconfig. And, thanks for the tip on baud rate. Yang -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
