thank you for your advice. 在2021年3月2日星期二 UTC+8 上午1:30:15<j.kiszka...@gmail.com> 写道:
> On 25.02.21 13:32, Smith li wrote: > > Dear Community, > > I have compile the jailhouse-images repository, and run the demo. > > > > the command to start linux in a cell is like this: > > > > #jailhouse cell linux /etc/jailhouse/rpi4-linux-demo.cell \ > > /boot/vmlinuz* \ > > -d /etc/jailhouse/dts/inmate-rpi4.dtb \ > > -i /usr/libexec/jailhouse/demos/rootfs.cpio \ > > -c "console=ttyS0,115200 ip=192.168.19.2" > > > > What I want to know is : how to set the root to a dir or disk ? > > > > I see some use root=/dev/nfs ip=192.168.1.1::****** :eth0 in this > > page. > > [1] > https://groups.google.com/g/jailhouse-dev/c/vXD4tzCPDG4/m/zX_hHNxJAgAJ > > > > Can't we set the linux root to a disk partition or a dir ? > > Will somebody tell me ? > > Thanks very much ! > > > Jailhouse does not provide regular virtual devices like other > hypervisors. Everything is mapped to shared memory devices. > > You may use network-based storage for the non-root cell, nfs as > suggested above or nbd. There is also experimental virtio-block, backed > by a simplistic process in the root cell. But integration into > jailhouse-images is missing, so trying that out can be tough. > > Jan > > -- > Siemens AG, T RDA IOT > Corporate Competence Center Embedded Linux > -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to jailhouse-dev+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/6efcb671-5747-4572-804e-631319b44b9fn%40googlegroups.com.