Author: jsuijs
Date: Sat Oct 11 10:56:36 2008
New Revision: 387

Added:
    trunk/unvalidated/sample/test/peripheral/pwm/test_pwm1.jal
    trunk/unvalidated/sample/test/peripheral/pwm/test_pwm2.jal
    trunk/unvalidated/sample/test/peripheral/usart/test_serial_hardware.jal
Modified:
    trunk/unvalidated/sample/by_device/16f88/pwm_led.jal
    trunk/unvalidated/sample/test/board/board_16f648a_js.jal
    trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal

Log:


Modified: trunk/unvalidated/sample/by_device/16f88/pwm_led.jal
==============================================================================
--- trunk/unvalidated/sample/by_device/16f88/pwm_led.jal        (original)
+++ trunk/unvalidated/sample/by_device/16f88/pwm_led.jal        Sat Oct 11  
10:56:36 2008
@@ -36,13 +36,13 @@
        -- loop up and down, to produce different duty cycle
        while i < 250 loop
                pwm1_set_dutycycle(i)
-               _usec_delay(100000)
-               i = i + 10
+               _usec_delay(10000)
+               i = i + 1
        end loop
        while i > 0 loop
                pwm1_set_dutycycle(i)
-               _usec_delay(100000)
-               i = i - 10
+               _usec_delay(10000)
+               i = i - 1
        end loop
        -- turning off, the LED lights at max.
        _usec_delay(500000)

Modified: trunk/unvalidated/sample/test/board/board_16f648a_js.jal
==============================================================================
--- trunk/unvalidated/sample/test/board/board_16f648a_js.jal    (original)
+++ trunk/unvalidated/sample/test/board/board_16f648a_js.jal    Sat Oct 11  
10:56:36 2008
@@ -55,8 +55,14 @@

  var byte lcd_dataport is porta_low -- LCD data  port
  var byte lcd_dataport_direction is porta_low_direction -- LCD data  port
+const byte LCD_ROWS     = 2                   -- 2 lines
+const byte LCD_CHARS    = 16                  -- 16 chars per line

+-- I2C setup
  var volatile bit i2c_scl            is pin_b4
  var volatile bit i2c_scl_direction  is pin_b4_direction
  var volatile bit i2c_sda            is pin_b3
  var volatile bit i2c_sda_direction  is pin_b3_direction
+
+-- ccp setup
+var volatile bit pin_ccp1_direction is pin_b3_direction

Modified: trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal
==============================================================================
--- trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal (original)
+++ trunk/unvalidated/sample/test/board/board_16f877a_dwarf.jal Sat Oct 11  
10:56:36 2008
@@ -36,8 +36,15 @@

  var byte lcd_dataport is portb_low -- LCD data  port
  var byte lcd_dataport_direction is portb_low_direction -- LCD data  port
+const byte LCD_ROWS     = 2                   -- 2 lines
+const byte LCD_CHARS    = 16                  -- 16 chars per line

+-- I2C setup
  var volatile bit i2c_scl            is pin_c3
  var volatile bit i2c_scl_direction  is pin_c3_direction
  var volatile bit i2c_sda            is pin_c4
  var volatile bit i2c_sda_direction  is pin_c4_direction
+
+-- ccp setup
+var volatile bit pin_ccp1_direction is pin_c2_direction
+var volatile bit pin_ccp2_direction is pin_c1_direction
\ No newline at end of file

Added: trunk/unvalidated/sample/test/peripheral/pwm/test_pwm1.jal
==============================================================================
--- (empty file)
+++ trunk/unvalidated/sample/test/peripheral/pwm/test_pwm1.jal  Sat Oct 11  
10:56:36 2008
@@ -0,0 +1,41 @@
+--  
--------------------------------------------------------------------------
+-- pwm1 TEST file
+--  
--------------------------------------------------------------------------
+-- This file defines a test for JALLIB testing, using a test-board
+--  defined by a BOARD file .
+--
+-- setup: a led on ccp2
+--
+--  
--------------------------------------------------------------------------
+--
+--  
--------------------------------------------------------------------------
+enable_digital_io()
+
+-- Configure PWM
+pin_ccp1_direction = output
+include pwm_ccp1
+pwm_max_resolution(1)
+pwm1_on()
+
+forever loop
+       var byte i
+       i = 0
+       -- loop up and down, to produce different duty cycle
+       while i < 250 loop
+               pwm1_set_dutycycle(i)
+               _usec_delay(10000)
+               i = i + 1
+       end loop
+       while i > 0 loop
+               pwm1_set_dutycycle(i)
+               _usec_delay(10000)
+               i = i - 1
+       end loop
+       -- turning off, the LED lights at max.
+       _usec_delay(500000)
+       pwm1_off()
+       _usec_delay(500000)
+       pwm1_on()
+
+end loop
+

Added: trunk/unvalidated/sample/test/peripheral/pwm/test_pwm2.jal
==============================================================================
--- (empty file)
+++ trunk/unvalidated/sample/test/peripheral/pwm/test_pwm2.jal  Sat Oct 11  
10:56:36 2008
@@ -0,0 +1,42 @@
+--  
--------------------------------------------------------------------------
+-- pwm2 TEST file
+--  
--------------------------------------------------------------------------
+-- This file defines a test for JALLIB testing, using a test-board
+--  defined by a BOARD file .
+--
+-- setup: a led on ccp2
+--
+--  
--------------------------------------------------------------------------
+--
+--  
--------------------------------------------------------------------------
+
+enable_digital_io()
+
+-- Configure PWM
+pin_ccp2_direction = output
+include pwm_ccp2
+pwm_max_resolution(1)
+pwm2_on()
+
+forever loop
+       var byte i
+       i = 0
+       -- loop up and down, to produce different duty cycle
+       while i < 250 loop
+               pwm2_set_dutycycle(i)
+               _usec_delay(10000)
+               i = i + 1
+       end loop
+       while i > 0 loop
+               pwm2_set_dutycycle(i)
+               _usec_delay(10000)
+               i = i - 1
+       end loop
+       -- turning off, the LED lights at max.
+       _usec_delay(500000)
+       pwm2_off()
+       _usec_delay(500000)
+       pwm2_on()
+
+end loop
+

Added:  
trunk/unvalidated/sample/test/peripheral/usart/test_serial_hardware.jal
==============================================================================
--- (empty file)
+++ trunk/unvalidated/sample/test/peripheral/usart/test_serial_hardware.jal     
 
Sat Oct 11 10:56:36 2008
@@ -0,0 +1,57 @@
+--  
--------------------------------------------------------------------------
+-- serial_hardware TEST file
+--  
--------------------------------------------------------------------------
+-- This file defines a test for JALLIB testing, using a test-board
+--  defined by a BOARD file .
+--
+-- setup: a serial connection to a terminal
+--
+--  
--------------------------------------------------------------------------
+--
+--  
--------------------------------------------------------------------------
+
+
+include delay_any_mc
+
+-- set all IO as digital
+enable_digital_io()
+
+-- ok, now setup serial
+const usart_hw_serial = true   -- true = RS232, false = SPI
+const serial_hw_baudrate = 115_200
+include serial_hardware
+serial_hw_init()
+
+include print                       -- output library
+
+led_direction = output
+for 4 loop
+   LED = on
+;   delay_100ms(3)
+   LED = off
+;   delay_100ms(3)
+end loop
+
+
+
+const byte str1[] = "Hello serial world"   -- define a string
+print_string(serial_hw_data, str1)  -- output string to LCD
+
+-- inform user PIC is ready !
+serial_hw_write("!")
+
+-- let's build our loop
+var byte char  -- will store received char
+var word counter = 10
+forever loop
+       if serial_hw_read(char) then
+               serial_hw_write(char)   -- that's the echo...
+       end if
+       
+       counter = counter - 1;
+       if (counter == 0) then
+          counter = 50000
+      serial_hw_data = "."     
+      LED = ! LED
+   end if
+end loop

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to