Hi guys,
I have a board here with a 16F819 and LCD for a thermometer/clock which uses a low power crystal at 32 KHz. I converted Eur's hello world sample to this board and noticed not only slow LCD writing but also slow updates of the counter. I suppose this is caused by the delay_any_mc library with this slow oscillator? Nevertheless I thought it was good to add this sample: the 16F818/819 are not so bad PIC but had no samples yet, and it is one of the few samples (or the only sample) with LP oscillator. But I added a note about the slow behaviour! Objections? Regards, Rob. -- Rob Hamerling, Vianen, NL (http://www.robh.nl/) --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
