Hi Albert, I am a bit surprised you can use either master or slave for your application. What is it you want to achieve?
Joep 2009/5/1 a.faber <[email protected]>: > > Hi Joep, > OK, but then I'm back to the original issue, that it does not work for 18f > device without the aliases. > I think I'll consider the SW implementation for the master device. > Albert > > > ----- Original Message ----- > From: "Joep Suijs" <[email protected]> > To: <[email protected]> > Sent: Friday, May 01, 2009 11:29 PM > Subject: [jallib] Re: Issue 69 in jallib: I2C hardware does not work for > PIC18F devices > > >> >> Eh.... it does not. >> >> I was assuming (incorrectly, as it turns out) that you were talking i2c >> master. >> I2c slave does only work in hardware, but afaik works perfectly. >> >> Joep >> >> 2009/5/1 a.faber <[email protected]>: >>> >>> Hi Joep, >>> Probably I need some help, but I can't see how to get the slave examples >>> to >>> work with the i2c sample >>> with just a simple change of the include file (e.g. >>> test_i2c_hw_slave_eeprom_simulator.jal). >>> Albert >>> >>> >>> > >>> >> >> > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
