Inside the zip file DatasheetCollect.zip contains PIC MCU External
Device Informations that I write.

I just put PIC10 and PIC12 first. If you have comments please do so
before I send PIC16 and PIC18.

I hope with this information i gave you all, you could upgrade the JAL
Library.

The definitions would state the pins, only for DIP.

Example for PIC10F200.DEX

Part=PIC10F200        ---> Part Name
PDF=41239D            ---> PDF Datasheet
Type=Flash            ---> Part Type
CoreSize=12           ---> core size in bit
MaxSpeed=4000000      ---> Max speed in Hz
ADCResolution=0       ---> Adc resolution in bit, 0 means no ADC
available.
AnalogComparator=0    ---> Comparator Available Number
PWM=0                 ---> PWM or CCP Available Number
Timer=TMR0            ---> Timer Available?
USART=0               ---> USART Available?
SPI=0                 ---> Support Serial Peripheral Interface?
I2CSlave=0            ---> Support I2C Slave?
I2CMaster=0           ---> Support I2C Master?
USB1_1=0              ---> Is USB 1.1 available?
CaptureCompare=0      ---> Capture
ParallelSlavePort=0   ---> PSP
BrownoutReset=0       ---> Brownout reset support
InternalOSC=4000000   ---> internal Oscillator available
InternalOSCOnly=1     ---> indicates is InternalOSCOnly available
SelfProgramming=0
ICSP=1                ---> In-Circuit Serial Programming
FlashAlternate=0      ---> Alternative flash could be used
DIPPinDef=            ---> pin aliases.
{
     1, NC,
     2, VDD,
     3, GP2/T0CKI/FOSC4,
     4, GP1/ICSPCLK,
     5, GP0/ICSPDAT,
     6, NC,
     7, VSS,
     8, GP3/_MCLR/VPP,
}

Notes=25mA source/sink per I/O

NC means Not Connected,
An underscore before variables (_) , indicates "not" or "active low",
eg :_MCLR
An asterisk (*) after variables means an alternative pin. VSS or VDD
alternative pins may not have asterisk on them.


Sorry for my bad English. English is not my first language, as I came
from Malaysia.

Regards,
Mohammad Hafiz Othman

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to