Hi Joep, Sorry for my late response, I've been (and will still be) very busy these days.
I tried print_word_dec() with a constant, it just won't work too. I've also run 16f88_serial_print.jal (with few modifications: internal osc @8MHz, baudrate: 19200), and the problem is reproducible. In the "word" section, I got: Test print.jal - words 4 B26E 1011001001101110 -3 but no trace of "45678" (just a "4" ?). This would confirm we have a problem with print.jal... Can you reproduce this ? You can also have a look at my code using ADC (see attachment) (must be compiled against SVN rev. >=1040) Cheers, Seb 2009/6/22 Joep Suijs <[email protected]> > Hi Seb, > > I used print yesterday and did not notice anything wrong. Can you repeat > this issue when you call print_word_dec() with a constant (or var with > constant assinged to it)? Can you provide me the program that does not > properly? > > Joep > > 2009/6/21 Sebastien Lelong <[email protected]> > >> Hi guys, >> >> I'm testing my ADC libs in high resolution mode. I need to print the >> result on serial, so I tried to use print.jal lib. >> >> var word measure >> measure = adc_read(0) >> print_word_dec(serial_hw_data,measure) >> >> It seems print_word_dec can't actually print the result (~512 or ~511, >> half of 10bits). I tried with print_word_binary(), and it works great. >> >> Any idea ? Have you ever had problems like that ? >> >> >> Cheers, >> Seb >> -- >> Sébastien Lelong >> http://www.sirloon.net >> http://sirbot.org >> >> >> -- Sébastien Lelong http://www.sirloon.net http://sirbot.org --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
16f88_adc_highres.jal
Description: Binary data
