Definitely will have his own specific libs. I don't know where is heading but if will use a bootloader as default, users will not set fuses. Also, speed (timing?) will be "static" - no changes. If will be easier to program, will have more users.
Picaxe have a growing community. They program the pic in basic and upload the program via a 3 wire cable. They have many commands just ready to be used: - serin, serout, count, readac, pulsin, pulsout, etc... They make loggers, windmill/solar controllers, robots, etc. and montages are made very fast because the manufacturer come with everything they need. They don't need to have knowledge about the microcontrollers behind the scene. I programmed once a Picaxe 8M (based on 12F683) and I know what I mean, as you know about Arduino. Of course, if this kind of people is the target. So, what they have? The chip(Picaxe) or the board(Arduino), a cable, the IDE and a manual with the language reference. Very important, the IDE is able to upload the compiled program directly to the chip or board. Targeting one chip (or two), the libraries will be more simple, without the need to (re)calculate the timings regarding to used crystal. The libs must hide the complexity as much as possible. And here is coming my wishes again. In Picaxe Basic you are able to make simple math operations, so, interpreting raw data and displayed the results on LCD without complicated transformations from user side. Not all the time you need a PC host software to interpret the data sent by a controller. This is (partly) why JAL is not as easy for beginners as we think it is. By example, is easy to implement an Arduino language as Pinguino is doing when you have underneath a [bold]complete[/bold] compiler. These are my thoughts, nothing else. Vasi On Oct 2, 9:13 pm, Sebastien Lelong <[email protected]> wrote: > Hi guys, > > I'm about to start writing dedicated libraries & samples for Jaluino. > Starting with a "jaluino_medium.jal", including device file and performing > basic setup (some would talk about "EZ" mode...). I expect more Jaluino > specific files. > > I was wondering if Jaluino should go into its own SVN. It won't have the > same release cycle, and may become too much independent from jallib. It's > purely based on jallib, but things are built over it, not just using it. > Maybe incubation time is over, Jaluino should go elsewhere (yet Rob hasn't > kicked us :)). > > Any thoughts ? > > Cheers, > Seb > -- > Sébastien Lelonghttp://www.sirloon.nethttp://sirbot.org > > PS: LED is still blinking... --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
