Indeed is an interesting project, thanks for the link! Vasi(funlw65)
On May 20, 7:47 am, mattschinkel <[email protected]> wrote: > Here's some interesting info for you... I tested out this cool > bootloader that shows as a device in "my computer". yes, cool... but > maybe not so practical (only because it is > slow).http://direction.scene-double.com/2008/07/08/usb-msd-bootloader-for-p... > > It came with a hex file for 18f4550, so I wrote it to my PIC. Then I > plugged in the USB port. Windows sees it in "my computer" as a > removable media device. On it, there are 3 files: > > 1. CONFIG (this file contains the PIC's eeprom data, you can modify > the PIC eeprom here) > 2. FW_10 (basically contains your hex file) > 3. BOOT (delete this to run your hex file, the device will disconnect > from your system) > > Press a button at any time to load the bootloader and connect the > device to your system again. > > It came with a sample program that does work. The document says if you > make a hex file, it may start at address 0x2400 > > This is not for an SD card, but anyways it shows in "my computer" as a > storage device :) > Matt. > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/jallib?hl=en. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
