Hi Vasile,
On 07/21/10 02:43 pm, vasile surducan wrote:
I'm using a 10MHz crystal in HS_PLL OSC mode on a PIC18F44J11. I should have 40MHz internal frequency, however blinking the standard LED sample gives 2S instead of 500uS period (4 time lower like PLL is not enabled). If I'm running in HS mode, blinking is OK. I've found the problem, good to know: enable the PLL from OSCTUNE register before setting the pragma
If you would have posted this in Jallist I would consider it as a tip for programmers, but since you report this in Jallib it looks like a sort of bug report. Please clarify the 'real' purpose of your report.
The original sample is correct and in my view the effect of any change is the user's responsibility. Therefore I qualify your initially wrong blink frequency as "user error".
Regards, Rob. -- Rob Hamerling, Vianen, NL (http://www.robh.nl/) -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
