Hello Joep,
On 2010/11/21 10:19, Joep Suijs wrote:
2010/11/21 Rob Hamerling<[email protected]>
I would think 'normal' samples should only be added when tested and proved to
work, and then these can be safely added to TORELEASE.
Iirc, we've discussed this before.
Many samples are generated from a test-file and a board file. Each
test-file is tested on a (at least one) specific board and board-files
are also tested with at least one test-file. Also, all samples
compile. So probably most samples wil work, but many combinations are
not verified. If this is not good enough, we should stop using
generated samples.
I didn't say that. On the contrary, I suggested to add untested samples
to TORELEASE when you are sufficiently confident that the combination
will work (because the same library worked at least one other board).
Regards, Rob.
--
R. Hamerling, Netherlands --- http://www.robh.nl
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
