Hi, those sht2x chips have all te same 7 bit adress 0b1000000. When you want to use them in parallel, you cannot use native IIC but have to use the sht1x/7x protocoll more infos can be found on www.sensirion.com
On Apr 4, 4:55 pm, "Serdar K." <[email protected]> wrote: > Hi Kiste, > > Thanks for the idea. > It would be great if this could be done by software. > > But i will have to go with hw, it seems. > > 2011/4/4 Oliver Seitz <[email protected]> > > > > > > > > > > > > > >There is no way to do this re-direction in run-time, is there ? > > > You could use external circuitry to e.g. multiplex the controllers clock > > line to one of several external clock lines. Chips that do not recieve a > > clock signal should have the data line released, so this would resemble some > > kind of "chip select" mechanism. > > > Greets, > > Kiste > > > -- > > You received this message because you are subscribed to the Google Groups > > "jallib" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > >http://groups.google.com/group/jallib?hl=en. > > -- > *Serdar KIZILTOPRAK > Intelligence **Technology Systems > [email protected]http://www.its3k.com > +90(216) 518 15 00* > ** -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
