Hi everyone, Jallib 1.3.0 as been released. It's great to see some new device files in this release!
You may download a copy of the Jallib package here: http://www.justanotherlanguage.org/downloads - jallib-1.3.0.zip <http://www.justanotherlanguage.org/sites/default/files/ftp_server/builds/release/jallib-1.3.0.zip> - jallib_full-1.3.0.zip <http://www.justanotherlanguage.org/sites/default/files/ftp_server/builds/release/jallib_full-1.3.0.zip> - jallib_full_win_setup-1.3.0.exe <http://www.justanotherlanguage.org/sites/default/files/ftp_server/builds/release/jallib_full_win_setup-1.3.0.exe> jallib-1.3.0 ------------ Changes since 1.2.0 device files: - Replaced existing device files and added more about new device files derived from MPLABX v4.05 externals: - Added accelerometer_gyroscope_bmi160.jal - accelerometer & gyroscope library. - Added seven_segment_multiplexer.jal - multiplexing for 7 segment displays. - Added transceiver CC1101 library filesystem: - jal: - networking: - peripherals: - Added Added memory_pointer0 lib - Added spi_slave_hw library - Added stopwatch2 library - Added timer libraries for more general usage of timers. - Added timer_frequency to calculate timer frequencies. protocols: - samples: - Added about 100 new blink-a-led samples for new device files - sd_card sample for 18f26j50 - fat32 sd_card sample for 18f26j50 - sd_card sample for 18f67j60 - fat32 sd_card sample for 18f67j60 - 18f4550_timer3 - a simple example for timer3 - accelerometer & gyroscope bmi160 sample for 18f4620 - 18f4620_freq_counter_osc_in - a frequency counter using OSC_IN as input. Can measure up to 40mhz. - 18f4620_freq_counter_timer_in - a frequency counter using timer_in. - 18f4620_motor_hbridge - hbridge motor sample. - seven_segment_multiplexer sample for 18f4620 to save pins when using more then one seven segment display. - spi_slave_hw sample - sample to receive spi data. - spi_to_serial sample - uses spi_slave_hw library to receive data then sends data back out via serial. - 18f67j50_spi.jal - send data via spi - 18f67j50_spi2.jal - send data via spi port 2 - Added transceiver CC1101 sample for 18f4620 tools: - -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/jallib. For more options, visit https://groups.google.com/d/optout.
