Try with the asm file, load it in mplab, and from there you should be able to compile it to a hex file and program your pic
Verify that you use the same pic as declared in the asm file Le 22 janv. 2024 à 17:01, à 17:01, Hans van Veldhuizen <hanze...@zeelandnet.nl> a écrit: >Hi Pinhead, >The example looks what i need, i have download the hex file but this >this >is a tmp file. >Changed the extension in hex . Pickit3plus gave an eror when tried to >load. >regards >Hans > > >Op maandag 22 januari 2024 om 16:36:45 UTC+1 schreef Pinhead: > >> Hi Hans, >> >> What are your requirements? >> Is this example from Instructable not a good starting point ? >> >> I do not know what you plan to do, but there is also the possibility >to >> decode DTMF tones. Some specialized ICs are still available >> >> >> >> >> Le 22 janv. 2024, à 10:28, Hans van Veldhuizen ><hanz...@zeelandnet.nl> a >> écrit: >>> >>> Hello all, >>> I would like to use the frequencies of a variable audio signal to >make >>> things respond to it. I found this : >>> >https://www.instructables.com/Frequency-Detector-using-PIC-12F683-Processor/ >>> Is there something like this in the Jal area? >>> regards >>> Hans >>> >>> > >-- >You received this message because you are subscribed to the Google >Groups "jallib" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to jallib+unsubscr...@googlegroups.com. >To view this discussion on the web visit >https://groups.google.com/d/msgid/jallib/8409e4d8-edac-41bb-a2f7-f4bef32e97b3n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to jallib+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/b578609f-4d4e-4b60-a2f3-188456802618%40gmail.com.