----------------------------------------------------------------
BEFORE YOU POST, search the faq at <http://java.apache.org/faq/>
WHEN YOU POST, include all relevant version numbers, log files,
and configuration files. Don't make us guess your problem!!!
----------------------------------------------------------------
Hello!
unhappily the rewrite Module will not work with Jserv on my SuSe Linux
6.4. in spite of all my trials and your suggestions.
Could anyone send me please your http.conf und jserv.conf files, if he has
a working Apache System (with working rewrite rules) with these features
(or equivalent):
Apache 1.3.12 with Jserv 1.1 on a SuSe Linux 6.4.
Thank you
bye
On Tue, 26 Sep 2000, BERWART Thierry wrote:
> ----------------------------------------------------------------
> BEFORE YOU POST, search the faq at <http://java.apache.org/faq/>
> WHEN YOU POST, include all relevant version numbers, log files,
> and configuration files. Don't make us guess your problem!!!
> ----------------------------------------------------------------
>
>
> Hello,
>
> My first idea is the order !
> The order of the loadmodules of apache is very important
> you must load rewrite module before the jserv module !
>
> in your httpd.conf :
> ...
> LoadModule rewrite_module libexec/mod_rewrite.so
> LoadModule jserv_module libexec/mod_jserv.so
> ...
>
> if it doesn't work,
>
> you can replace your line :
>
> RewriteRule ^/(.*)$ /servlet/Hello [PT]
>
> by
>
> RewriteRule ^/(.*) /servlet/Hello [PT]
>
> Good luck !
>
> Thierry
>
> -----Original Message-----
> From: Mark Ross [mailto:[EMAIL PROTECTED]]
> Sent: Monday, September 25, 2000 7:21 PM
> To: Java Apache Users
> Subject: rewrite rules with jserv??
>
>
> ----------------------------------------------------------------
> BEFORE YOU POST, search the faq at <http://java.apache.org/faq/>
> WHEN YOU POST, include all relevant version numbers, log files,
> and configuration files. Don't make us guess your problem!!!
> ----------------------------------------------------------------
>
> Hello!
>
> i have this problem:
>
> i installed Apache 1.3.12 in Linux 6.4, then Jserv 1.1.
> (my Hello.class startpage runs)
>
> Well I want to use rewrite to get always the startpage:
> RewriteEngine On
> RewriteRule ^/servlets/Hello /servlets/Hello [PT,L]
> RewriteRule ^/(.*)$ /servlet/Hello [PT]
> RewriteLog /var/log/rewrite_log
> RewriteLogLevel 5
>
> unfortunately it don't works.
> either the servet works but not the Rewrite rules or the rewrite rules
> work but not the servlet.
> it dipends of the position this 3 rows (after the row <IfDefine MODULES>
> or in the end of the httpd.conf file):
> <IfDefine JSERV>
> Include /etc/httpd/jserv/jserv.conf
> </IfDefine>
>
> can you help me !?
>
> yet 2 things: the links which I found about this problem and my whole
> httpd.conf file
>
> here the links about this problem
> ----------------------------------------------------------------------------
> http://dev.apache.org/jyve-faq/Turbine/screen/DisplayQuestionAnswer/action/S
> etAll/project_id/1/faq_id/1/topic_id/4/question_id/227;jsessionid=3fs7iw96q1
> http://dev.apache.org/jyve-faq/Turbine/screen/DisplayQuestionAnswer/action/S
> etAll/project_id/1/faq_id/1/topic_id/4/question_id/143;jsessionid=3fs7iw96q1
> http://dev.apache.org/jyve-faq/Turbine/screen/DisplayQuestionAnswer/action/S
> etAll/project_id/1/faq_id/1/topic_id/4/question_id/160;jsessionid=3fs7iw96q1
> http://dev.apache.org/jyve-faq/Turbine/screen/DisplayQuestionAnswer/action/S
> etAll/project_id/1/faq_id/1/topic_id/4/question_id/165;jsessionid=3fs7iw96q1
>
> here my httpd.conf file:
> ----------------------------------------------------------------------------
> ##
> ## httpd.conf -- Apache HTTP server configuration file
> ##
>
>
> # Based upon the NCSA server configuration files originally by Rob McCool.
> #
> # This is the main Apache server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://www.apache.org/docs/> for detailed information about
> # the directives.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # After this file is processed, the server will look for and process
> # /usr/local/httpd/conf/srm.conf and then
> /usr/local/httpd/conf/access.conf
> # unless you have overridden these with ResourceConfig and/or
> # AccessConfig directives here.
> #
> # The configuration directives are grouped into three basic sections:
> # 1. Directives that control the operation of the Apache server process
> as a
> # whole (the 'global environment').
> # 2. Directives that define the parameters of the 'main' or 'default'
> server,
> # which responds to requests that aren't handled by a virtual host.
> # These directives also provide default values for the settings
> # of all virtual hosts.
> # 3. Settings for virtual hosts, which allow Web requests to be sent to
> # different IP addresses or hostnames and have them handled by the
> # same Apache server process.
> #
> # Configuration and logfile names: If the filenames you specify for many
> # of the server's control files begin with "/" (or "drive:/" for Win32),
> the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "/usr/local/apache" will be interpreted by the
> # server as "/usr/local/apache/logs/foo.log".
> #
>
> ### Section 1: Global Environment
> #
> # The directives in this section affect the overall operation of Apache,
> # such as the number of concurrent requests it can handle or where it
> # can find its configuration files.
> #
>
> #
> # ServerType is either inetd, or standalone. Inetd mode is only supported
> on
> # Unix platforms.
> #
> ServerType standalone
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # NOTE! If you intend to place this on an NFS (or otherwise network)
> # mounted filesystem then please read the LockFile documentation
> # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
> # you will save yourself a lot of trouble.
> #
> # Do NOT add a slash at the end of the directory path.
> #
> ServerRoot "/usr/local/httpd"
>
> #
> # The LockFile directive sets the path to the lockfile used when Apache
> # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
> # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
> # its default value. The main reason for changing it is if the logs
> # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
> # DISK. The PID of the main server process is automatically appended to
> # the filename.
> #
> LockFile /var/lock/subsys/httpd/httpd.accept.lock
>
> #
> # PidFile: The file in which the server should record its process
> # identification number when it starts.
> #
> PidFile /var/run/httpd.pid
>
> #
> # ScoreBoardFile: File used to store internal server process information.
> # Not all architectures require this. But if yours does (you'll know
> because
> # this file will be created when you run Apache) then you *must* ensure
> that
> # no two invocations of Apache share the same scoreboard file.
> #
> ScoreBoardFile /var/log/httpd/apache_runtime_status
>
> #
> # In the standard configuration, the server will process this file,
> # srm.conf, and access.conf in that order. The latter two files are
> # now distributed empty, as it is recommended that all directives
> # be kept in a single file for simplicity. The commented-out values
> # below are the built-in defaults. You can have the server ignore
> # these files altogether by using "/dev/null" (for Unix) or
> # "nul" (for Win32) for the arguments to the directives.
> #
> #ResourceConfig conf/srm.conf
> #AccessConfig conf/access.conf
>
> #
> # Timeout: The number of seconds before receives and sends time out.
> #
> Timeout 300
>
> #
> # KeepAlive: Whether or not to allow persistent connections (more than
> # one request per connection). Set to "Off" to deactivate.
> #
> KeepAlive On
>
> #
> # MaxKeepAliveRequests: The maximum number of requests to allow
> # during a persistent connection. Set to 0 to allow an unlimited amount.
> # We recommend you leave this number high, for maximum performance.
> #
> MaxKeepAliveRequests 100
>
> #
> # KeepAliveTimeout: Number of seconds to wait for the next request from
> the
> # same client on the same connection.
> #
> KeepAliveTimeout 15
>
> #
> # Server-pool size regulation. Rather than making you guess how many
> # server processes you need, Apache dynamically adapts to the load it
> # sees --- that is, it tries to maintain enough server processes to
> # handle the current load, plus a few spare servers to handle transient
> # load spikes (e.g., multiple simultaneous requests from a single
> # Netscape browser).
> #
> # It does this by periodically checking how many servers are waiting
> # for a request. If there are fewer than MinSpareServers, it creates
> # a new spare. If there are more than MaxSpareServers, some of the
> # spares die off. The default values are probably OK for most sites.
> #
> MinSpareServers 1
> MaxSpareServers 1
>
> #
> # Number of servers to start initially --- should be a reasonable ballpark
> # figure.
> #
> StartServers 1
>
> #
> # Limit on total number of servers running, i.e., limit on the number
> # of clients who can simultaneously connect --- if this limit is ever
> # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
> # It is intended mainly as a brake to keep a runaway server from taking
> # the system with it as it spirals down...
> #
> MaxClients 150
>
> #
> # MaxRequestsPerChild: the number of requests each child process is
> # allowed to process before the child dies. The child will exit so
> # as to avoid problems after prolonged use when Apache (and maybe the
> # libraries it uses) leak memory or other resources. On most systems,
> this
> # isn't really needed, but a few (such as Solaris) do have notable leaks
> # in the libraries. For these platforms, set to something like 10000
> # or so; a setting of 0 means unlimited.
> #
> # NOTE: This value does not include keepalive requests after the initial
> # request per connection. For example, if a child process handles
> # an initial request and 10 subsequent "keptalive" requests, it
> # would only count as 1 request towards this limit.
> #
> MaxRequestsPerChild 0
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, in addition to the default. See also the <VirtualHost>
> # directive.
> #
> #Listen 3000
> #Listen 12.34.56.78:80
>
> #
> # BindAddress: You can support virtual hosts with this option. This
> directive
> # is used to tell the server which IP address to listen to. It can either
> # contain "*", an IP address, or a fully qualified Internet domain name.
> # See also the <VirtualHost> and Listen directives.
> #
> #BindAddress *
>
>
> <IfDefine PHP>
> LoadModule php3_module /usr/lib/apache/libphp3.so
> </IfDefine>
> <IfDefine PHP4>
> LoadModule php4_module /usr/lib/apache/libphp4.so
> </IfDefine>
> <IfDefine PERL>
> LoadModule perl_module /usr/lib/apache/libperl.so
> </IfDefine>
> <IfDefine DAV>
> LoadModule dav_module /usr/lib/apache/libdav.so
> </IfDefine>
>
> <IfDefine MODULES>
>
> <IfDefine JSERV>
> Include /etc/httpd/jserv/jserv.conf
> </IfDefine>
>
> # LoadModule allowdev_module /usr/lib/apache/mod_allowdev.so
> LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
> LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
> LoadModule env_module /usr/lib/apache/mod_env.so
> LoadModule define_module /usr/lib/apache/mod_define.so
> LoadModule config_log_module /usr/lib/apache/mod_log_config.so
> LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
> LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
> LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
> LoadModule mime_module /usr/lib/apache/mod_mime.so
> LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
> LoadModule status_module /usr/lib/apache/mod_status.so
> LoadModule info_module /usr/lib/apache/mod_info.so
> LoadModule includes_module /usr/lib/apache/mod_include.so
> LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
> LoadModule dir_module /usr/lib/apache/mod_dir.so
> LoadModule cgi_module /usr/lib/apache/mod_cgi.so
> LoadModule asis_module /usr/lib/apache/mod_asis.so
> LoadModule imap_module /usr/lib/apache/mod_imap.so
> LoadModule action_module /usr/lib/apache/mod_actions.so
> LoadModule speling_module /usr/lib/apache/mod_speling.so
> LoadModule userdir_module /usr/lib/apache/mod_userdir.so
> LoadModule alias_module /usr/lib/apache/mod_alias.so
>
> LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
> LoadModule access_module /usr/lib/apache/mod_access.so
> LoadModule auth_module /usr/lib/apache/mod_auth.so
> LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
> LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
> LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
> LoadModule digest_module /usr/lib/apache/mod_digest.so
> LoadModule proxy_module /usr/lib/apache/libproxy.so
> LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
> LoadModule expires_module /usr/lib/apache/mod_expires.so
> LoadModule headers_module /usr/lib/apache/mod_headers.so
> LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
> LoadModule example_module /usr/lib/apache/mod_example.so
> LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
> LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
> <IfDefine SSL>
> LoadModule ssl_module /usr/lib/apache/libssl.so
> </IfDefine>
>
> # Reconstruction of the complete module list from all available modules
> # (static and shared ones) to achieve correct module execution order.
> # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
> ClearModuleList
> AddModule mod_mmap_static.c
> AddModule mod_vhost_alias.c
> AddModule mod_env.c
> AddModule mod_define.c
> AddModule mod_log_config.c
> AddModule mod_log_agent.c
> AddModule mod_log_referer.c
> AddModule mod_mime_magic.c
> AddModule mod_mime.c
> AddModule mod_negotiation.c
> AddModule mod_status.c
> AddModule mod_info.c
> AddModule mod_include.c
> AddModule mod_autoindex.c
> AddModule mod_dir.c
> AddModule mod_cgi.c
> AddModule mod_asis.c
> AddModule mod_imap.c
> AddModule mod_actions.c
> AddModule mod_speling.c
> AddModule mod_userdir.c
> AddModule mod_alias.c
> AddModule mod_rewrite.c
> AddModule mod_access.c
> AddModule mod_auth.c
> AddModule mod_auth_anon.c
> AddModule mod_auth_dbm.c
> AddModule mod_auth_db.c
> AddModule mod_digest.c
> AddModule mod_proxy.c
> AddModule mod_cern_meta.c
> AddModule mod_expires.c
> AddModule mod_headers.c
> AddModule mod_usertrack.c
> AddModule mod_example.c
> AddModule mod_unique_id.c
> AddModule mod_so.c
> AddModule mod_setenvif.c
> <IfDefine SSL>
> AddModule mod_ssl.c
> </IfDefine>
> LoadModule cookie_auth_module /usr/lib/apache/mod_auth_cookie.so
> LoadModule cookie_file_access_module
> /usr/lib/apache/mod_auth_cookie_file.so
> LoadModule external_auth_module /usr/lib/apache/mod_auth_external.so
> LoadModule inst_auth_module /usr/lib/apache/mod_auth_inst.so
> LoadModule auth_system_module /usr/lib/apache/mod_auth_system.so
> LoadModule eaccess_module /usr/lib/apache/mod_eaccess.so
> LoadModule bandwidth_module /usr/lib/apache/mod_bandwidth.so
> LoadModule cache_module /usr/lib/apache/libcache.so
> LoadModule urlcount_module /usr/lib/apache/mod_urlcount.so
> LoadModule disallow_id_module /usr/lib/apache/mod_disallow_id.so
> LoadModule lock_module /usr/lib/apache/mod_lock.so
> LoadModule peephole_module /usr/lib/apache/mod_peephole.so
> LoadModule put_module /usr/lib/apache/mod_put.so
> LoadModule qs2ssi_module /usr/lib/apache/mod_qs2ssi.so
> LoadModule session_module /usr/lib/apache/mod_session.so
> LoadModule fastcgi_module /usr/lib/apache/mod_fastcgi.so
> LoadModule cvs_module /usr/lib/apache/mod_cvs.so
> LoadModule roaming_module /usr/lib/apache/mod_roaming.so
> LoadModule w3c_ip_forwarding_module /usr/lib/apache/mod_ip_forwarding.so
> LoadModule macro_module /usr/lib/apache/mod_macro.so
> </IfDefine>
>
>
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a DSO
> you
> # have to place corresponding `LoadModule' lines at this location so the
> # directives contained in it are actually available _before_ they are
> used.
> # Please read the file README.DSO in the Apache 1.3 distribution for more
> # details about the DSO mechanism and run `httpd -l' for the list of
> already
> # built-in (statically linked and thus always available) modules in your
> httpd
> # binary.
> #
> # Note: The order is which modules are loaded is important. Don't change
> # the order below without expert advice.
> #
> # Example:
> # LoadModule foo_module libexec/mod_foo.so
> LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
> LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
> LoadModule env_module /usr/lib/apache/mod_env.so
> LoadModule define_module /usr/lib/apache/mod_define.so
> LoadModule config_log_module /usr/lib/apache/mod_log_config.so
> LoadModule agent_log_module /usr/lib/apache/mod_log_agent.so
> LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
> LoadModule mime_magic_module /usr/lib/apache/mod_mime_magic.so
> LoadModule mime_module /usr/lib/apache/mod_mime.so
> LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
> LoadModule status_module /usr/lib/apache/mod_status.so
> LoadModule info_module /usr/lib/apache/mod_info.so
> LoadModule includes_module /usr/lib/apache/mod_include.so
> LoadModule autoindex_module /usr/lib/apache/mod_autoindex.so
> LoadModule dir_module /usr/lib/apache/mod_dir.so
>
> LoadModule cgi_module /usr/lib/apache/mod_cgi.so
> LoadModule asis_module /usr/lib/apache/mod_asis.so
> LoadModule imap_module /usr/lib/apache/mod_imap.so
> LoadModule action_module /usr/lib/apache/mod_actions.so
> LoadModule speling_module /usr/lib/apache/mod_speling.so
> LoadModule userdir_module /usr/lib/apache/mod_userdir.so
> LoadModule alias_module /usr/lib/apache/mod_alias.so
>
> LoadModule rewrite_module /usr/lib/apache/mod_rewrite.so
> LoadModule access_module /usr/lib/apache/mod_access.so
> LoadModule auth_module /usr/lib/apache/mod_auth.so
> LoadModule anon_auth_module /usr/lib/apache/mod_auth_anon.so
> LoadModule dbm_auth_module /usr/lib/apache/mod_auth_dbm.so
> LoadModule db_auth_module /usr/lib/apache/mod_auth_db.so
> LoadModule digest_module /usr/lib/apache/mod_digest.so
> LoadModule proxy_module /usr/lib/apache/libproxy.so
> LoadModule cern_meta_module /usr/lib/apache/mod_cern_meta.so
> LoadModule expires_module /usr/lib/apache/mod_expires.so
> LoadModule headers_module /usr/lib/apache/mod_headers.so
> LoadModule usertrack_module /usr/lib/apache/mod_usertrack.so
> LoadModule example_module /usr/lib/apache/mod_example.so
> LoadModule unique_id_module /usr/lib/apache/mod_unique_id.so
> LoadModule setenvif_module /usr/lib/apache/mod_setenvif.so
> <IfDefine SSL>
> LoadModule ssl_module /usr/lib/apache/libssl.so
> </IfDefine>
>
> # Reconstruction of the complete module list from all available modules
> # (static and shared ones) to achieve correct module execution order.
> # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
> ClearModuleList
> AddModule mod_mmap_static.c
> AddModule mod_vhost_alias.c
> AddModule mod_env.c
> AddModule mod_define.c
> AddModule mod_log_config.c
> AddModule mod_log_agent.c
> AddModule mod_log_referer.c
> AddModule mod_mime_magic.c
> AddModule mod_mime.c
> AddModule mod_negotiation.c
> AddModule mod_status.c
> AddModule mod_info.c
> AddModule mod_include.c
> AddModule mod_autoindex.c
> AddModule mod_dir.c
> AddModule mod_cgi.c
> AddModule mod_asis.c
> AddModule mod_imap.c
> AddModule mod_actions.c
> AddModule mod_speling.c
> AddModule mod_userdir.c
> AddModule mod_alias.c
> AddModule mod_rewrite.c
> AddModule mod_access.c
> AddModule mod_auth.c
> AddModule mod_auth_anon.c
> AddModule mod_auth_dbm.c
> AddModule mod_auth_db.c
> AddModule mod_digest.c
> AddModule mod_proxy.c
> AddModule mod_cern_meta.c
> AddModule mod_expires.c
> AddModule mod_headers.c
> AddModule mod_usertrack.c
> AddModule mod_example.c
> AddModule mod_unique_id.c
> AddModule mod_so.c
> AddModule mod_setenvif.c
> <IfDefine SSL>
> AddModule mod_ssl.c
> </IfDefine>
>
>
>
>
>
>
>
>
>
> <IfDefine PHP>
> AddModule mod_php3.c
> </IfDefine>
> <IfDefine PHP4>
> AddModule mod_php4.c
> </IfDefine>
> <IfDefine PERL>
> AddModule mod_perl.c
> </IfDefine>
> <IfDefine DAV>
> AddModule mod_dav.c
> </IfDefine>
> <IfDefine MODULES>
> # AddModule mod_allowdev.c
> AddModule mod_auth_cookie.c
> AddModule mod_auth_cookie_file.c
> AddModule mod_auth_external.c
> AddModule mod_auth_inst.c
> AddModule mod_auth_system.c
> AddModule mod_eaccess.c
> AddModule mod_bandwidth.c
> AddModule mod_cache.c
> AddModule mod_urlcount.c
> AddModule mod_disallow_id.c
> AddModule mod_lock.c
> AddModule mod_peephole.c
> AddModule mod_put.c
> AddModule mod_qs2ssi.c
> AddModule mod_session.c
> AddModule mod_fastcgi.c
> AddModule mod_cvs.c
> AddModule mod_roaming.c
> AddModule mod_ip_forwarding.c
> AddModule mod_macro.c
> </IfDefine>
>
> #
> # ExtendedStatus controls whether Apache will generate "full" status
> # information (ExtendedStatus On) or just basic information
> (ExtendedStatus
> # Off) when the "server-status" handler is called. The default is Off.
> #
> ExtendedStatus On
>
>
> #
> # To enable mod_dav, add the following directive to the appropriate
> # container(s) in the httpd.conf file:
> #
> <IfDefine DAV>
> DavLockDB /var/lock/DAVLock
> </IfDefine>
>
>
> ### Section 2: 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # If your ServerType directive (set earlier in the 'Global Environment'
> # section) is set to "inetd", the next few directives don't have any
> # effect since their settings are defined by the inetd configuration.
> # Skip ahead to the ServerAdmin directive.
> #
>
> #
> # Port: The port to which the standalone server listens. For
> # ports < 1023, you will need httpd to be run as root initially.
> #
> Port 80
>
>
> ##
> ## SSL Support
> ##
> ## When we also provide SSL we have to listen to the
> ## standard HTTP port (see above) and to the HTTPS port
> ##
> <IfDefine SSL>
> Listen 80
> Listen 443
> </IfDefine>
>
> #
> # If you wish httpd to run as a different user or group, you must run
> # httpd as root initially and it will switch.
> #
> # User/Group: The name (or #number) of the user/group to run httpd as.
> # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
> # . On HPUX you may not be able to use shared memory as nobody, and the
> # suggested workaround is to create a user www and use that user.
> # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
> # when the value of (unsigned)Group is above 60000;
> # don't use Group nogroup on these systems!
> #
> User wwwrun
> Group nogroup
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents.
> #
> ServerAdmin root@localhost
>
> #
> # ServerName allows you to set a host name which is sent back to clients
> for
> # your server if it's different than the one the program would get (i.e.,
> use
> # "www" instead of the host's real name).
> #
> # Note: You cannot just invent host names and hope they work. The name you
> # define here must be a valid DNS name for your host. If you don't
> understand
> # this, ask your network administrator.
> # If your host doesn't have a registered DNS name, enter its IP address
> here.
> # You will have to access it by its address (e.g., http://123.45.67.89/)
> # anyway, and this will make redirections work in a sensible way.
> #
> #ServerName besson.suse.de
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory, but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "/usr/local/httpd/htdocs"
>
> #
> # Each directory to which Apache has access, can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # permissions.
> #
> <Directory />
> AuthUserFile /etc/httpd/passwd
> AuthGroupFile /etc/httpd/group
>
> Options -FollowSymLinks
> AllowOverride None
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> <Directory "/usr/local/httpd/htdocs">
>
> #
> # This may also be "None", "All", or any combination of "Indexes",
> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> Options Indexes -FollowSymLinks +Includes MultiViews
>
> #
> # This controls which options the .htaccess files in directories can
> # override. Can also be "All", or any combination of "Options",
> "FileInfo",
> # "AuthConfig", and "Limit"
> #
> AllowOverride None
>
> #
> # Controls who can get stuff from this server.
> #
> Order allow,deny
> Allow from all
>
>
> #
> # dont use DAV without access control !!
> #
> <IfDefine DAV>
> DAV On
> </IfDefine>
>
> </Directory>
>
> #
> # UserDir: The name of the directory which is appended onto a user's home
> # directory if a ~user request is received.
> #
> <IfModule mod_userdir.c>
> UserDir public_html
> </IfModule>
>
> #
> # Control access to UserDir directories. The following is an example
> # for a site where these directories are restricted to read-only.
> #
> #<Directory /home/*/public_html>
> # AllowOverride FileInfo AuthConfig Limit
> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> # <Limit GET POST OPTIONS PROPFIND>
> # Order allow,deny
> # Allow from all
> # </Limit>
> # <LimitExcept GET POST OPTIONS PROPFIND>
> # Order deny,allow
> # Deny from all
> # </LimitExcept>
> #</Directory>
>
> #
> # DirectoryIndex: Name of the file or files to use as a pre-written HTML
> # directory index. Separate multiple entries with spaces.
> #
> <IfModule mod_dir.c>
> DirectoryIndex index.html
> </IfModule>
>
> #
> # AccessFileName: The name of the file to look for in each directory
> # for access control information.
> #
> AccessFileName .htaccess
>
> #
> # The following lines prevent .htaccess files from being viewed by
> # Web clients. Since .htaccess files often contain authorization
> # information, access is disallowed for security reasons. Comment
> # these lines out if you want Web visitors to see the contents of
> # .htaccess files. If you change the AccessFileName directive above,
> # be sure to make the corresponding changes here.
> #
> # Also, folks tend to use names such as .htpasswd for password
> # files, so this will protect those as well.
> #
> <Files ~ "^\.ht">
> Order allow,deny
> Deny from all
> </Files>
>
> #
> # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with
> each
> # document that was negotiated on the basis of content. This asks proxy
> # servers not to cache the document. Uncommenting the following line
> disables
> # this behavior, and proxies will be allowed to cache the documents.
> #
> #CacheNegotiatedDocs
>
> #
> # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
> # Apache needs to construct a self-referencing URL (a URL that refers back
> # to the server the response is coming from) it will use ServerName and
> # Port to form a "canonical" name. With this setting off, Apache will
> # use the hostname:port that the client supplied, when possible. This
> # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
> #
> UseCanonicalName On
>
> #
> # TypesConfig describes where the mime.types file (or equivalent) is
> # to be found.
> #
> <IfModule mod_mime.c>
> TypesConfig /etc/httpd/mime.types
> </IfModule>
>
> #
> # DefaultType is the default MIME type the server will use for a document
> # if it cannot otherwise determine one, such as from filename extensions.
> # If your server contains mostly text or HTML documents, "text/plain" is
> # a good value. If most of your content is binary, such as applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> #
> # The mod_mime_magic module allows the server to use various hints from
> the
> # contents of the file itself to determine its type. The MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> # mod_mime_magic is not part of the default server (you have to add
> # it yourself with a LoadModule [see the DSO paragraph in the 'Global
> # Environment' section], or recompile the server and include
> mod_mime_magic
> # as part of the configuration), so it's enclosed in an <IfModule>
> container.
> # This means that the MIMEMagicFile directive will only be processed if
> the
> # module is part of the server.
> #
> <IfModule mod_mime_magic.c>
> MIMEMagicFile /etc/httpd/magic
> </IfModule>
>
> #
> # HostnameLookups: Log the names of clients or just their IP addresses
> # e.g., www.apache.org (on) or 204.62.129.132 (off).
> # The default is off because it'd be overall better for the net if people
> # had to knowingly turn this feature on, since enabling it means that
> # each client request will result in AT LEAST one lookup request to the
> # nameserver.
> #
> HostnameLookups Off
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog /var/log/httpd/error_log
>
> #
> # LogLevel: Control the number of messages logged to the error_log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
> combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
> LogFormat "%{Referer}i -> %U" referer
> LogFormat "%{User-agent}i" agent
>
> #
> # The location and format of the access logfile (Common Logfile Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog /var/log/httpd/access_log common
>
> #
> # If you would like to have agent and referer logfiles, uncomment the
> # following directives.
> #
> #CustomLog /var/log/httpd/referer_log referer
> #CustomLog /var/log/httpd/agent_log agent
>
> #
> # If you prefer a single logfile with access, agent, and referer
> information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog /var/log/httpd/access_log combined
>
> #
> # Optionally add a line containing the server version and virtual host
> # name to server-generated pages (error documents, FTP directory listings,
> # mod_status and mod_info output etc., but not CGI generated documents).
> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> # Set to one of: On | Off | EMail
> #
> ServerSignature On
> Alias /howto/ /usr/doc/howto/
> Alias /hilfe/ /usr/doc/susehilf/
> Alias /doc/ /usr/doc/
> Alias /cgi-bin-sdb/ /usr/local/httpd/cgi-bin/
> Alias /sdb/ /usr/doc/sdb/
> Alias /manual/ /usr/doc/packages/apache/manual/
> Alias /htdig/ /opt/www/htdocs/htdig/
> Alias /opt/kde/share/doc/HTML/ /opt/kde/share/doc/HTML/
> Alias /opt/gnome/share/gnome/help/ /opt/gnome/share/gnome/help/
>
> <Directory /usr/doc>
> Options FollowSymLinks Indexes +Includes
> AllowOverride None
> </Directory>
>
> <Directory /opt/kde/share/doc/HTML/>
> Options FollowSymLinks Indexes
> AllowOverride None
> </Directory>
>
> <Directory /opt/gnome/share/gnome/help/>
> Options FollowSymLinks Indexes
> AllowOverride None
> </Directory>
>
>
> #
> # Aliases: Add here as many aliases as you need (with no limit). The
> format is
> # Alias fakename realname
> #
> <IfModule mod_alias.c>
>
> #
> # Note that if you include a trailing / on fakename then the server
> will
> # require it to be present in the URL. So "/icons" isn't aliased in
> this
> # example, only "/icons/"..
> #
> Alias /icons/ "/usr/local/httpd/icons/"
>
> <Directory "/usr/local/httpd/icons">
> Options Indexes MultiViews
> AllowOverride None
> Order allow,deny
> Allow from all
> </Directory>
>
> #
> # ScriptAlias: This controls which directories contain server scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the realname directory are treated as applications and
> # run by the server when requested rather than as documents sent to
> the client.
> # The same rules about trailing "/" apply to ScriptAlias directives as
> to
> # Alias.
> #
> ScriptAlias /cgi-bin/ "/usr/local/httpd/cgi-bin/"
>
> #
> # "/usr/local/httpd/cgi-bin" should be changed to whatever your
> ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "/usr/local/httpd/cgi-bin">
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
> </Directory>
>
> </IfModule>
> # End of aliases.
>
> # cgi-bin for SuSE help system
> # using SetHandler
>
> <Directory /usr/lib/sdb/cgi-bin>
> AllowOverride None
> Options +ExecCGI -Includes
> SetHandler cgi-script
> </Directory>
>
> # enable perl for cgi-bin
> #
> <IfDefine PERL>
> Perlrequire /usr/include/apache/modules/perl/startup.perl
> </IfDefine>
>
> <Location /cgi-bin>
>
> AllowOverride None
> Options +ExecCGI -Includes
> SetHandler cgi-script
>
> <IfDefine PERL>
> AddHandler perl-script .pl
> PerlHandler Apache::Registry
> PerlSendHeader On
> </IfDefine>
>
> </Location>
>
>
>
> #
> # Redirect allows you to tell clients about documents which used to exist
> in
> # your server's namespace, but do not anymore. This allows you to tell the
> # clients where to look for the relocated document.
> # Format: Redirect old-URI new-URL
> #
>
> #
> # Directives controlling the display of server-generated directory
> listings.
> #
> <IfModule mod_autoindex.c>
>
> #
> # FancyIndexing is whether you want fancy directory indexing or
> standard
> #
> IndexOptions FancyIndexing
>
> #
> # AddIcon* directives tell the server which icon to show for different
> # files or filename extensions. These are only displayed for
> # FancyIndexed directories.
> #
> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>
> AddIconByType (TXT,/icons/text.gif) text/*
> AddIconByType (IMG,/icons/image2.gif) image/*
> AddIconByType (SND,/icons/sound2.gif) audio/*
> AddIconByType (VID,/icons/movie.gif) video/*
>
> AddIcon /icons/binary.gif .bin .exe
> AddIcon /icons/binhex.gif .hqx
> AddIcon /icons/tar.gif .tar
> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> AddIcon /icons/a.gif .ps .ai .eps
> AddIcon /icons/layout.gif .html .shtml .htm .pdf
> AddIcon /icons/text.gif .txt
> AddIcon /icons/c.gif .c
> AddIcon /icons/p.gif .pl .py
> AddIcon /icons/f.gif .for
> AddIcon /icons/dvi.gif .dvi
> AddIcon /icons/uuencoded.gif .uu
> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> AddIcon /icons/tex.gif .tex
> AddIcon /icons/bomb.gif core
>
> AddIcon /icons/back.gif ..
> AddIcon /icons/hand.right.gif README
> AddIcon /icons/folder.gif ^^DIRECTORY^^
> AddIcon /icons/blank.gif ^^BLANKICON^^
>
> #
> # DefaultIcon is which icon to show for files which do not have an
> icon
> # explicitly set.
> #
> DefaultIcon /icons/unknown.gif
>
> #
> # AddDescription allows you to place a short description after a file
> in
> # server-generated indexes. These are only displayed for FancyIndexed
> # directories.
> # Format: AddDescription "description" filename
> #
> AddDescription "GZIP compressed document" .gz
> AddDescription "tar archive" .tar
> AddDescription "GZIP compressed tar archive" .tgz
>
> #
> # ReadmeName is the name of the README file the server will look for
> by
> # default, and append to directory listings.
> #
> # HeaderName is the name of a file which should be prepended to
> # directory indexes.
> #
> # If MultiViews are amongst the Options in effect, the server will
> # first look for name.html and include it if found. If name.html
> # doesn't exist, the server will then look for name.txt and include
> # it as plaintext if found.
> #
> ReadmeName README
> HeaderName HEADER
>
> #
> # IndexIgnore is a set of filenames which directory indexing should
> ignore
> # and not include in the listing. Shell-style wildcarding is
> permitted.
> #
> IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
>
> </IfModule>
> # End of indexing directives.
>
> #
> # Document types.
> #
> <IfModule mod_mime.c>
>
> #
> # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
> uncompress
> # information on the fly. Note: Not all browsers support this.
> # Despite the name similarity, the following Add* directives have
> nothing
> # to do with the FancyIndexing customization directives above.
> #
> AddEncoding x-compress Z
> AddEncoding x-gzip gz tgz
>
> #
> # AddLanguage allows you to specify the language of a document. You
> can
> # then use content negotiation to give a browser a file in a language
> # it can understand.
> #
> # Note 1: The suffix does not have to be the same as the language
> # keyword --- those with documents in Polish (whose net-standard
> # language code is pl) may wish to use "AddLanguage pl .po" to
> # avoid the ambiguity with the common suffix for perl scripts.
> #
> # Note 2: The example entries below illustrate that in quite
> # some cases the two character 'Language' abbriviation is not
> # identical to the two character 'Country' code for its country,
> # E.g. 'Danmark/dk' versus 'Danish/da'.
> #
> # Note 3: In the case of 'ltz' we violate the RFC by using a three
> char
> # specifier. But there is 'work in progress' to fix this and get
> # the reference data for rfc1766 cleaned up.
> #
> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
> # French (fr) - German (de) - Greek-Modern (el)
> # Italian (it) - Portugese (pt) - Luxembourgeois* (ltz)
> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
> #
> AddLanguage da .dk
> AddLanguage nl .nl
> AddLanguage en .en
> AddLanguage et .ee
> AddLanguage fr .fr
> AddLanguage de .de
> AddLanguage el .el
> AddLanguage it .it
> AddLanguage ja .ja
> AddCharset ISO-2022-JP .jis
> AddLanguage pl .po
> AddCharset ISO-8859-2 .iso-pl
> AddLanguage pt .pt
> AddLanguage pt-br .pt-br
> AddLanguage ltz .lu
> AddLanguage ca .ca
> AddLanguage es .es
> AddLanguage sv .se
> AddLanguage cz .cz
>
> # LanguagePriority allows you to give precedence to some languages
> # in case of a tie during content negotiation.
> #
> # Just list the languages in decreasing order of preference. We have
> # more or less alphabetized them here. You probably want to change
> this.
> #
> <IfModule mod_negotiation.c>
> LanguagePriority en da nl et fr de el it ja pl pt pt-br ltz ca es
> sv
> </IfModule>
>
> #
> # AddType allows you to tweak mime.types without actually editing it,
> or to
> # make certain files to be certain types.
> #
> # For example, the PHP 3.x module (not part of the Apache distribution
> - see
> # http://www.php.net) will typically use:
> #
> <IfDefine PHP>
> AddType application/x-httpd-php3 .php3
> AddType application/x-httpd-php3-source .phps
> AddType application/x-httpd-php3 .phtml
> </IfDefine>
> #
> # And for PHP 4.x, use:
> #
> <IfDefine PHP4>
> AddType application/x-httpd-php .php
> AddType application/x-httpd-php-source .phps
> </IfDefine>
>
>
> AddType application/x-tar .tgz
>
> #
> # AddHandler allows you to map certain file extensions to "handlers",
> # actions unrelated to filetype. These can be either built into the
> server
> # or added with the Action command (see below)
> #
> # If you want to use server side includes, or CGI outside
> # ScriptAliased directories, uncomment the following lines.
> #
> # To use CGI scripts:
> #
> AddHandler cgi-script .cgi
>
> #
> # To use server-parsed HTML files
> #
> AddType text/html .shtml
> AddHandler server-parsed .shtml
> AddHandler server-parsed .html
>
> #
> # Uncomment the following line to enable Apache's send-asis HTTP file
> # feature
> #
> #AddHandler send-as-is asis
>
> #
> # If you wish to use server-parsed imagemap files, use
> #
> #AddHandler imap-file map
>
> #
> # To enable type maps, you might want to use
> #
> #AddHandler type-map var
>
> </IfModule>
> # End of document types.
>
> #
> # Action lets you define media types that will execute a script whenever
> # a matching file is called. This eliminates the need for repeated URL
> # pathnames for oft-used CGI file processors.
> # Format: Action media/type /cgi-script/location
> # Format: Action handler-name /cgi-script/location
> #
>
> #
> # MetaDir: specifies the name of the directory in which Apache can find
> # meta information files. These files contain additional HTTP headers
> # to include when sending the document
> #
> #MetaDir .web
>
> #
> # MetaSuffix: specifies the file name suffix for the file containing the
> # meta information.
> #
> #MetaSuffix .meta
>
> #
> # Customizable error response (Apache style)
> # these come in three flavors
> #
> # 1) plain text
> #ErrorDocument 500 "The server made a boo boo.
> # n.b. the (") marks it as text, it does not get output
> #
> # 2) local redirects
> #ErrorDocument 404 /missing.html
> # to redirect to local URL /missing.html
> #ErrorDocument 404 /cgi-bin/missing_handler.pl
> # N.B.: You can redirect to a script or a document using
> server-side-includes.
> #
> # 3) external redirects
> #ErrorDocument 402 http://some.other_server.com/subscription_info.html
> # N.B.: Many of the environment variables associated with the original
> # request will *not* be available to such a script.
>
> #
> # Customize behaviour based on the browser
> #
> <IfModule mod_setenvif.c>
>
> #
> # The following directives modify normal HTTP response behavior.
> # The first directive disables keepalive for Netscape 2.x and browsers
> that
> # spoof it. There are known problems with these browser
> implementations.
> # The second directive is for Microsoft Internet Explorer 4.0b2
> # which has a broken HTTP/1.1 implementation and does not properly
> # support keepalive when it is used on 301 or 302 (redirect)
> responses.
> #
> BrowserMatch "Mozilla/2" nokeepalive
> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
> force-response-1.0
>
> #
> # The following directive disables HTTP/1.1 responses to browsers
> which
> # are in violation of the HTTP/1.0 spec by not being able to grok a
> # basic 1.1 response.
> #
> BrowserMatch "RealPlayer 4\.0" force-response-1.0
> BrowserMatch "Java/1\.0" force-response-1.0
> BrowserMatch "JDK/1\.0" force-response-1.0
>
> </IfModule>
>
> #
> # Allow server status reports, with the URL of
> http://servername/server-status
> # Change the ".your_domain.com" to match your domain to enable.
> #
> <Location /server-status>
> SetHandler server-status
> Order deny,allow
> Deny from all
> Allow from localhost
> </Location>
>
> #
> # Allow remote server configuration reports, with the URL of
> # http://servername/server-info (requires that mod_info.c be loaded).
> # Change the ".your_domain.com" to match your domain to enable.
> #
> <Location /server-info>
> SetHandler server-info
> Order deny,allow
> Deny from all
> Allow from localhost
> </Location>
>
>
> #
> # enable perl-status for mod_perl
> #
> <IfDefine PERL>
> <Location /perl-status>
> SetHandler perl-script
> PerlHandler Apache::Status
> order deny,allow
> deny from all
> allow from localhost
> </Location>
> </IfDefine>
>
>
> #
> # There have been reports of people trying to abuse an old bug from
> pre-1.1
> # days. This bug involved a CGI script distributed as a part of Apache.
> # By uncommenting these lines you can redirect these attacks to a logging
> # script on phf.apache.org. Or, you can record them yourself, using the
> script
> # support/phf_abuse_log.cgi.
> #
> #<Location /cgi-bin/phf*>
> # Deny from all
> # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
> #</Location>
>
> #
> # Proxy Server directives. Uncomment the following lines to
> # enable the proxy server:
> #
> #<IfModule mod_proxy.c>
> #ProxyRequests On
> #
> #<Directory proxy:*>
> # Order deny,allow
> # Deny from all
> # Allow from .your_domain.com
> #</Directory>
>
> #
> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> # ("Full" adds the server version; "Block" removes all outgoing Via:
> headers)
> # Set to one of: Off | On | Full | Block
> #
> #ProxyVia On
>
> #
> # To enable the cache as well, edit and uncomment the following lines:
> # (no cacheing without CacheRoot)
> #
> #CacheRoot "/var/cache/httpd"
> #CacheSize 5
> #CacheGcInterval 4
> #CacheMaxExpire 24
> #CacheLastModifiedFactor 0.1
> #CacheDefaultExpire 1
> #NoCache a_domain.com another_domain.edu joes.garage_sale.com
>
> #</IfModule>
> # End of proxy directives.
>
> ### Section 3: Virtual Hosts
> #
> # VirtualHost: If you want to maintain multiple domains/hostnames on your
> # machine you can setup VirtualHost containers for them.
> # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
> # for further details before you try to setup virtual hosts.
> # You may use the command line option '-S' to verify your virtual host
> # configuration.
>
> #
> # If you want to use name-based virtual hosts you need to define at
> # least one IP address (and port number) for them.
> #
> #NameVirtualHost 12.34.56.78:80
> #NameVirtualHost 12.34.56.78
>
>
> #
> # VirtualHost example:
> # Almost any Apache directive may go into a VirtualHost container.
> #
> #<VirtualHost ip.address.of.host.some_domain.com>
> # ServerAdmin [EMAIL PROTECTED]
> # DocumentRoot /www/docs/host.some_domain.com
> # ServerName host.some_domain.com
> # ErrorLog logs/host.some_domain.com-error_log
> # CustomLog logs/host.some_domain.com-access_log common
> #</VirtualHost>
>
> #<VirtualHost _default_:*>
> #</VirtualHost>
>
> ##
> ## SSL Global Context
> ##
> ## All SSL configuration in this context applies both to
> ## the main server and all SSL-enabled virtual hosts.
> ##
>
> #
> # Some MIME-types for downloading Certificates and CRLs
> #
> <IfDefine SSL>
> AddType application/x-x509-ca-cert .crt
> AddType application/x-pkcs7-crl .crl
> </IfDefine>
>
> <IfModule mod_ssl.c>
>
> # Pass Phrase Dialog:
> # Configure the pass phrase gathering process.
> # The filtering dialog program (`builtin' is a internal
> # terminal dialog) has to provide the pass phrase on stdout.
> SSLPassPhraseDialog builtin
>
> # Inter-Process Session Cache:
> # Configure the SSL Session Cache: First either `none'
> # or `dbm:/path/to/file' for the mechanism to use and
> # second the expiring timeout (in seconds).
> #SSLSessionCache none
> #SSLSessionCache shm:/var/log/ssl_scache(512000)
> SSLSessionCache dbm:/var/log/ssl_scache
> SSLSessionCacheTimeout 300
>
> # Semaphore:
> # Configure the path to the mutual explusion semaphore the
> # SSL engine uses internally for inter-process synchronization.
> SSLMutex file:/var/log/ssl_mutex
>
> # Pseudo Random Number Generator (PRNG):
> # Configure one or more sources to seed the PRNG of the
> # SSL library. The seed data should be of good random quality.
> # WARNING! On some platforms /dev/random blocks if not enough entropy
> # is available. This means you then cannot use the /dev/random device
> # because it would lead to very long connection times (as long as
> # it requires to make more entropy available). But usually those
> # platforms additionally provide a /dev/urandom device which doesn't
> # block. So, if available, use this one instead. Read the mod_ssl User
> # Manual for more details.
> SSLRandomSeed startup builtin
> SSLRandomSeed connect builtin
> #SSLRandomSeed startup file:/dev/random 512
> #SSLRandomSeed startup file:/dev/urandom 512
> #SSLRandomSeed connect file:/dev/random 512
> #SSLRandomSeed connect file:/dev/urandom 512
>
> # Logging:
> # The home of the dedicated SSL protocol logfile. Errors are
> # additionally duplicated in the general error log file. Put
> # this somewhere where it cannot be used for symlink attacks on
> # a real server (i.e. somewhere where only root can write).
> # Log levels are (ascending order: higher ones include lower ones):
> # none, error, warn, info, trace, debug.
> SSLLog /var/log/httpd/ssl_engine_log
> SSLLogLevel info
>
> </IfModule>
>
> <IfDefine SSL>
>
> ##
> ## SSL Virtual Host Context
> ##
>
> <VirtualHost _default_:443>
>
> # General setup for the virtual host
> DocumentRoot "/usr/local/httpd/htdocs"
> ServerName besson.suse.de
> ServerAdmin [EMAIL PROTECTED]
> ErrorLog /var/log/httpd/error_log
> TransferLog /var/log/httpd/access_log
>
>
>
> # SSL Engine Switch:
> # Enable/Disable SSL for this virtual host.
> SSLEngine off
>
> # SSL Cipher Suite:
> # List the ciphers that the client is permitted to negotiate.
> # See the mod_ssl documentation for a complete list.
> #SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
>
> # Server Certificate:
> # Point SSLCertificateFile at a PEM encoded certificate. If
> # the certificate is encrypted, then you will be prompted for a
> # pass phrase. Note that a kill -HUP will prompt again. A test
> # certificate can be generated with `make certificate' under
> # built time. Keep in mind that if you've both a RSA and a DSA
> # certificate you can configure both in parallel (to also allow
> # the use of DSA ciphers, etc.)
> SSLCertificateFile /etc/httpd/ssl.crt/server.crt
> #SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt
>
> # Server Private Key:
> # If the key is not combined with the certificate, use this
> # directive to point at the key file. Keep in mind that if
> # you've both a RSA and a DSA private key you can configure
> # both in parallel (to also allow the use of DSA ciphers, etc.)
> SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
> #SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key
>
> # Server Certificate Chain:
> # Point SSLCertificateChainFile at a file containing the
> # concatenation of PEM encoded CA certificates which form the
> # certificate chain for the server certificate. Alternatively
> # the referenced file can be the same as SSLCertificateFile
> # when the CA certificates are directly appended to the server
> # certificate for convinience.
> #SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt
>
> # Certificate Authority (CA):
> # Set the CA certificate verification path where to find CA
> # certificates for client authentication or alternatively one
> # huge file containing all of them (file must be PEM encoded)
> # Note: Inside SSLCACertificatePath you need hash symlinks
> # to point to the certificate files. Use the provided
> # Makefile to update the hash symlinks after changes.
> #SSLCACertificatePath /etc/httpd/ssl.crt
> #SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt
>
> # Certificate Revocation Lists (CRL):
> # Set the CA revocation path where to find CA CRLs for client
> # authentication or alternatively one huge file containing all
> # of them (file must be PEM encoded)
> # Note: Inside SSLCARevocationPath you need hash symlinks
> # to point to the certificate files. Use the provided
> # Makefile to update the hash symlinks after changes.
> #SSLCARevocationPath /etc/httpd/ssl.crl
> #SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl
>
> # Client Authentication (Type):
> # Client certificate verification type and depth. Types are
> # none, optional, require and optional_no_ca. Depth is a
> # number which specifies how deeply to verify the certificate
> # issuer chain before deciding the certificate is not valid.
> #SSLVerifyClient require
> #SSLVerifyDepth 10
>
> # Access Control:
> # With SSLRequire you can do per-directory access control based
> # on arbitrary complex boolean expressions containing server
> # variable checks and other lookup directives. The syntax is a
> # mixture between C and Perl. See the mod_ssl documentation
> # for more details.
> #<Location />
> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
> # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
> # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
> # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
> # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
> # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
> #</Location>
>
> # SSL Engine Options:
> # Set various options for the SSL engine.
> # o FakeBasicAuth:
> # Translate the client X.509 into a Basic Authorisation. This means
> that
> # the standard Auth/DBMAuth methods can be used for access control.
> The
> # user name is the `one line' version of the client's X.509
> certificate.
> # Note that no password is obtained from the user. Every entry in the
> user
> # file needs this password: `xxj31ZMTZzkVA'.
> # o ExportCertData:
> # This exports two additional environment variables: SSL_CLIENT_CERT
> and
> # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
> # server (always existing) and the client (only existing when client
> # authentication is used). This can be used to import the certificates
> # into CGI scripts.
> # o StdEnvVars:
> # This exports the standard SSL/TLS related `SSL_*' environment
> variables.
> # Per default this exportation is switched off for performance
> reasons,
> # because the extraction step is an expensive operation and is usually
> # useless for serving static content. So one usually enables the
> # exportation for CGI and SSI requests only.
> # o CompatEnvVars:
> # This exports obsolete environment variables for backward
> compatibility
> # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use
> this
> # to provide compatibility to existing CGI scripts.
> # o StrictRequire:
> # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
> # under a "Satisfy any" situation, i.e. when it applies access is
> denied
> # and no other module can change it.
> # o OptRenegotiate:
> # This enables optimized SSL connection renegotiation handling when
> SSL
> # directives are used in per-directory context.
> #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
> <Files ~ "\.(cgi|shtml)$">
> SSLOptions +StdEnvVars
> </Files>
> <Directory "/usr/local/httpd/cgi-bin">
> SSLOptions +StdEnvVars
> </Directory>
>
> # SSL Protocol Adjustments:
> # The safe and default but still SSL/TLS standard compliant shutdown
> # approach is that mod_ssl sends the close notify alert but doesn't wait
> for
> # the close notify alert from client. When you need a different shutdown
> # approach you can use one of the following variables:
> # o ssl-unclean-shutdown:
> # This forces an unclean shutdown when the connection is closed, i.e.
> no
> # SSL close notify alert is send or allowed to received. This
> violates
> # the SSL/TLS standard but is needed for some brain-dead browsers. Use
> # this when you receive I/O errors because of the standard approach
> where
> # mod_ssl sends the close notify alert.
> # o ssl-accurate-shutdown:
> # This forces an accurate shutdown when the connection is closed, i.e.
> a
> # SSL close notify alert is send and mod_ssl waits for the close
> notify
> # alert of the client. This is 100% SSL/TLS standard compliant, but in
> # practice often causes hanging connections with brain-dead browsers.
> Use
> # this only for browsers where you know that their SSL implementation
> # works correctly.
> # Notice: Most problems of broken clients are also related to the HTTP
> # keep-alive facility, so you usually additionally want to disable
> # keep-alive for those clients, too. Use variable "nokeepalive" for
> this.
> SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
>
> # Per-Server Logging:
> # The home of a custom SSL log file. Use this when you want a
> # compact non-error SSL logfile on a virtual host basis.
> CustomLog /var/log/httpd/ssl_request_log \
> "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
>
> </VirtualHost>
>
> </IfDefine>
>
> #Config for Apache Webserver
> #
> RewriteEngine On
> RewriteRule ^/servlets/Hello /servlets/Hello [PT,L]
> RewriteRule ^/(.*)$ /servlet/Hello [PT]
> RewriteLog /var/log/rewrite_log
> RewriteLogLevel 5
>
> #
> #End Config for Apache Webserver
>
>
>
>
>
>
>
> --
> --------------------------------------------------------------
> Please read the FAQ! <http://java.apache.org/faq/>
> To subscribe: [EMAIL PROTECTED]
> To unsubscribe: [EMAIL PROTECTED]
> Search Archives:
> <http://www.mail-archive.com/java-apache-users%40list.working-dogs.com/>
> Problems?: [EMAIL PROTECTED]
>
>
> --
> --------------------------------------------------------------
> Please read the FAQ! <http://java.apache.org/faq/>
> To subscribe: [EMAIL PROTECTED]
> To unsubscribe: [EMAIL PROTECTED]
> Search Archives:
> <http://www.mail-archive.com/java-apache-users%40list.working-dogs.com/>
> Problems?: [EMAIL PROTECTED]
>
>
--
--------------------------------------------------------------
Please read the FAQ! <http://java.apache.org/faq/>
To subscribe: [EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Search Archives:
<http://www.mail-archive.com/java-apache-users%40list.working-dogs.com/>
Problems?: [EMAIL PROTECTED]
