Thanks much Tony: I am going on vacation tomorrow, so won't be able to respond for a while. I plan to get into it when I return about March 12. DaveFrom: e09kp5...@sneakemail.com To: jBASE@googlegroups.com Subject: RE: Pick r83 to jbase conversion Date: Tue, 28 Feb 2012 13:45:16 -0800
Dave – I updated the sparse documentation with information that responds to your points below. I will be happy to work with you (or anyone) to ensure the utility can be understood for productive usage.http://Nebula-RnD..com/freeware/SRAT_README.txt(Look for “28-Feb-2012 Update”)I did not fill in the jBase-specific bits of code myself (I’ve only used it for D3 so far) so I’m particularly interested in helping anyone who wants to get this fully working for jBase – and then of course I’d like to roll all changes back into the freeware source package! Regards,T From: David Grenfell Tony: Thanks for this. I am assuming that both R83 and Jb must be up and running at the same time to use this. I just installed jb and r83 on to the same box so obviously can only run one at a time. I will however, be obtaining jb 4.x shortly, so will put it on another box and Accuterm also. I will keep you informed of progress. Dave > From: Tony > Dave, good to see you here. > > Check out SAVE.RESTORE.AT, which is freeware that I published recently > on my site (http://Nebula-RnD.com/freeware). It allows you to > save/restore entire accounts between any MV systems through AccuTerm. > That completely eliminates the tape issue. I just did a R83/D3 > migration and this will help for R83/jBase as well. > > I’ll be happy to answer questions about the freeware but it would help > if requests for in-depth assistance were framed in a services > engagement. If you wish, I will be happy to manage the data migration > aspect of your client’s effort, and you can assist with the details of > code conversion, etc. > > I'll be happy to provide more info here or via email about how the > utility works. > > Tony Gravagno > Nebula Research and Development > TG@ remove.pleaseNebula-RnD.com > Nebula R&D sells mv.NET worldwide > and provides related development services > Remove.pleaseNebula-RnD.com/blog > Visit http://PickWiki.com! Contribute! > http://Twitter.com/TonyGravagno > http://groups.google..com/group/mvdbms/about > > From: David Grenfell > > > I am coming out of retirement to help out an old client. After 27 > years > > of running on PICK R83, I have convinced him it is time to upgrade. > > > Here is my problem: > > > They backup their files on to a wangek streaming tape. The > controller > > card is a wangtek 30850-008. > > > I have a computer (p233) that has the 8 bit slot that will > accomodate this > > card. I have Windows 2000 installed on this system. I have > installed jbase > > 3.10 eval. However, jbase will not access the tape drive. I guess > what I > > need now are installation instructions and probably a driver for > this card. > > Can any-one guide me through this? -- IMPORTANT: T24/Globus posts are no longer accepted on this forum. To post, send email to jBASE@googlegroups.com To unsubscribe, send email to jbase-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/jBASE?hl=en -- IMPORTANT: T24/Globus posts are no longer accepted on this forum. To post, send email to jBASE@googlegroups.com To unsubscribe, send email to jbase-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/jBASE?hl=en
