Isn't this present by default in the routing table on w2k? I remember
having to configure this manually on linux 2.0 in order to get dhcp-server
to work, but that is long ago ...
Here is my routing-table (that I have not altered, use `route print` to see yours):
<snip>
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 50 04 29 8d 9c ...... FE575 Ethernet Adapter
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 172.16.2.1 172.16.3.30 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
172.16.2.0 255.255.254.0 172.16.3.30 172.16.3.30 1
172.16.3.30 255.255.255.255 127.0.0.1 127.0.0.1 1
172.16.255.255 255.255.255.255 172.16.3.30 172.16.3.30 1
224.0.0.0 224.0.0.0 172.16.3.30 172.16.3.30 1
255.255.255.255 255.255.255.255 172.16.3.30 172.16.3.30 1
Default Gateway: 172.16.2.1
===========================================================================
Persistent Routes:
None
</snip>
I think the entry
172.16.2.0 255.255.254.0 172.16.3.30 172.16.3.30 1
would be the result after applying a w2k-version of the example route add -net
linux-command in your post. My IP is 172.16.3.30 and netmask 255.255.254.0, so
I could add this route with the command
route add 172.16.2.0 MASK 255.255.254.0 172.16.3.30 metric 1 if 0x2
but it's already there, so ...
The "173.16.3.30"-part is actually the gateway address for my network. My
PC is it's own gateway to the network it's on. The linux-variant of the
route command uses the -net option and a local device (like eth0)
as gateway-specification for the route. As the gateway-ip is specified,
it seems w2k is smart enough that you can skip the device "if 0x2"-part.
Hence
`route add 224.0.0.0 MASK 240.0.0.0 224.50.50.50 metric 1`
should do the trick, if your IP is 224.50.50.50.
Still no clustering, though ...
--
Best Regards,
[EMAIL PROTECTED]
-----Original Message-----
From: Bill Burke [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 12, 2002 4:31 PM
To: JBoss 2; Jboss-Dev
Subject: [JBoss-user] adding multicast route on Win2k
Anybody know how to add a multicast route on Win2k/XP?
Here's a similar command on Linux:
$ route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
I need this for the Clustering Troubleshooting guide.
Thanks,
Bill
_______________________________________________________________
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_______________________________________________
JBoss-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/jboss-user
_______________________________________________________________
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_______________________________________________
JBoss-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/jboss-user
