Using xemacs and trying to use the jde get the following error:
(1) (initialization/error) An error has occurred while loading ~/.emacs:
Couldn't load sound file drum-beep
To ensure normal operation, you should investigate the cause of the
error
in your initialization file and remove it. Use the `-debug-init' option
to XEmacs to view a complete error backtrace.
If I activate the debug button I get the warning at the bottom Cannot
open load file: gdbsrc
Don't know how to use the this - Use the `-debug-init' option
to XEmacs to view a complete error backtrace.
Below is my .emacs file which I copied into a .xemacs file if that makes
any difference:
Also, the path for my jde is /home/tjturner/jde/jde-2.1.5
Any help appreciated.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Basic Customization ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Enable the command `narrow-to-region' ("C-x n n"), a useful
;; command, but possibly confusing to a new user, so it's disabled by
;; default.
(put 'narrow-to-region 'disabled nil)
;;; Define a variable to indicate whether we're running XEmacs/Lucid
Emacs.
;;; (You do not have to defvar a global variable before using it --
;;; you can just call `setq' directly like we do for
`emacs-major-version'
;;; below. It's clearer this way, though.)
(defvar running-xemacs (string-match "XEmacs\\|Lucid" emacs-version))
;; Make the sequence "C-x w" execute the `what-line' command,
;; which prints the current line number in the echo area.
(global-set-key "\C-xw" 'what-line)
;; set up the function keys to do common tasks to reduce Emacs pinky
;; and such.
;; Make F1 invoke help
(global-set-key [f1] 'help-command)
;; Make F2 be `undo'
(global-set-key [f2] 'undo)
;; Make F3 be `find-file'
;; Note: it does not currently work to say
;; (global-set-key 'f3 "\C-x\C-f")
;; The reason is that macros can't do interactive things properly.
;; This is an extremely longstanding bug in Emacs. Eventually,
;; it will be fixed. (Hopefully ..)
(global-set-key [f3] 'find-file)
;; Make F4 be "mark", F5 be "copy", F6 be "paste"
;; Note that you can set a key sequence either to a command or to
another
;; key sequence.
(global-set-key [f4] 'set-mark-command)
(global-set-key [f5] "\M-w")
(global-set-key [f6] "\C-y")
;; Shift-F4 is "pop mark off of stack"
(global-set-key [(shift f4)] (lambda () (interactive) (set-mark-command
t)))
;; Make F7 be `save-buffer'
(global-set-key [f7] 'save-buffer)
;; Make F8 be "start macro", F9 be "end macro", F10 be "execute macro"
(global-set-key [f8] 'start-kbd-macro)
(global-set-key [f9] 'end-kbd-macro)
(global-set-key [f10] 'call-last-kbd-macro)
;; Here's an alternative binding if you don't use keyboard macros:
;; Make F8 be `save-buffer' followed by `delete-window'.
;;(global-set-key 'f8 "\C-x\C-s\C-x0")
;; If you prefer delete to actually delete forward then you want to
;; uncomment the next line (or use `Customize' to customize this).
;; (setq delete-key-deletes-forward t)
(cond (running-xemacs
;;
;; Code for any version of XEmacs/Lucid Emacs goes here
;;
;; Change the values of some variables.
;; (t means true; nil means false.)
;;
;; Use the "Describe Variable..." option on the "Help" menu
;; to find out what these variables mean.
(setq find-file-use-truenames nil
find-file-compare-truenames t
minibuffer-confirm-incomplete t
complex-buffers-menu-p t
next-line-add-newlines nil
mail-yank-prefix "> "
kill-whole-line t
)
;; When running ispell, consider all 1-3 character words as
correct.
(setq ispell-extra-args '("-W" "3"))
(cond ((or (not (fboundp 'device-type))
(equal (device-type) 'x)
(equal (device-type) 'mswindows))
;; Code which applies only when running emacs under X or
;; MicroSoft Windows goes here. (We check whether the
;; function `device-type' exists before using it. In
;; versions before 19.12, there was no such function.
;; If it doesn't exist, we simply assume we're running
;; under X -- versions before 19.12 only supported X.)
;; Remove the binding of C-x C-c, which normally exits emacs.
;; It's easy to hit this by mistake, and that can be annoying.
;; Under X, you can always quit with the "Exit Emacs" option on
;; the File menu.
(global-set-key "\C-x\C-c" nil)
;; Uncomment this to enable "sticky modifier keys" in 19.13
;; and up. With sticky modifier keys enabled, you can
;; press and release a modifier key before pressing the
;; key to be modified, like how the ESC key works always.
;; If you hold the modifier key down, however, you still
;; get the standard behavior. I personally think this
;; is the best thing since sliced bread (and a *major*
;; win when it comes to reducing Emacs pinky), but it's
;; disorienting at first so I'm not enabling it here by
;; default.
;;(setq modifier-keys-are-sticky t)
;; This changes the variable which controls the text that goes
;; in the top window title bar. (However, it is not changed
;; unless it currently has the default value, to avoid
;; interfering with a -wn command line argument I may have
;; started emacs with.)
(if (equal frame-title-format "%S: %b")
(setq frame-title-format
(concat "%S: " invocation-directory invocation-name
" [" emacs-version "]"
(if nil ; (getenv "NCD")
""
" %b"))))
;; If we're running on display 0, load some nifty sounds that
;; will replace the default beep. But if we're running on a
;; display other than 0, which probably means my NCD X terminal,
;; which can't play digitized sounds, do two things: reduce the
;; beep volume a bit, and change the pitch of the sound that is
;; made for "no completions."
;;
;; (Note that sampled sounds only work if XEmacs was compiled
;; with sound support, and we're running on the console of a
;; Sparc, HP, or SGI machine, or on a machine which has a
;; NetAudio server; otherwise, you just get the standard beep.)
;;
;; (Note further that changing the pitch and duration of the
;; standard beep only works with some X servers; many servers
;; completely ignore those parameters.)
;;
(cond ((or (and (getenv "DISPLAY")
(string-match ":0" (getenv "DISPLAY")))
(and (eq (console-type) 'mswindows)
(device-sound-enabled-p)))
(load-default-sounds))
(t
(setq bell-volume 40)
(setq sound-alist
(append sound-alist '((no-completion :pitch 500))))
))
;; Make `C-x C-m' and `C-x RET' be different (since I tend
;; to type the latter by accident sometimes.)
(define-key global-map [(control x) return] nil)
;; Change the pointer used when the mouse is over a modeline
(set-glyph-image modeline-pointer-glyph "leftbutton")
;; Change the continuation glyph face so it stands out more
(and (fboundp 'make-face-bold)
(boundp 'continuation-glyph)
(make-face-bold (glyph-face continuation-glyph)))
;; Change the pointer used during garbage collection.
;;
;; Note that this pointer image is rather large as pointers go,
;; and so it won't work on some X servers (such as the MIT
;; R5 Sun server) because servers may have lamentably small
;; upper limits on pointer size.
;;(if (featurep 'xpm)
;; (set-glyph-image gc-pointer-glyph
;; (expand-file-name "trash.xpm" data-directory)))
;; Here's another way to do that: it first tries to load the
;; pointer once and traps the error, just to see if it's
;; possible to load that pointer on this system; if it is,
;; then it sets gc-pointer-glyph, because we know that
;; will work. Otherwise, it doesn't change that variable
;; because we know it will just cause some error messages.
(if (featurep 'xpm)
(let ((file (expand-file-name "recycle.xpm" data-directory)))
(if (condition-case error
;; check to make sure we can use the pointer.
(make-image-instance file nil
'(pointer))
(error nil)) ; returns nil if an error occurred.
(set-glyph-image gc-pointer-glyph file))))
(when (featurep 'menubar)
;; Add `dired' to the File menu
(add-menu-button '("File") ["Edit Directory" dired t])
;; Here's a way to add scrollbar-like buttons to the menubar
(add-menu-button nil ["Top" beginning-of-buffer t])
(add-menu-button nil ["<<<" scroll-down t])
(add-menu-button nil [" . " recenter t])
(add-menu-button nil [">>>" scroll-up t])
(add-menu-button nil ["Bot" end-of-buffer t]))
;; Change the behavior of mouse button 2 (which is normally
;; bound to `mouse-yank'), so that it inserts the selected text
;; at point (where the text cursor is), instead of at the
;; position clicked.
;;
;; Note that you can find out what a particular key sequence or
;; mouse button does by using the "Describe Key..." option on
;; the Help menu.
(setq mouse-yank-at-point t)
;; When editing C code (and Lisp code and the like), I often
;; like to insert tabs into comments and such. It gets to be
;; a pain to always have to use `C-q TAB', so I set up a more
;; convenient binding. Note that this does not work in
;; TTY frames, where tab and shift-tab are indistinguishable.
(define-key global-map '(shift tab) 'self-insert-command)
;; LISPM bindings of Control-Shift-C and Control-Shift-E.
;; Note that "\C-C" means Control-C, not Control-Shift-C.
;; To specify shifted control characters, you must use the
;; more verbose syntax used here.
(define-key emacs-lisp-mode-map '(control C) 'compile-defun)
(define-key emacs-lisp-mode-map '(control E) 'eval-defun)
;; If you like the FSF Emacs binding of button3 (single-click
;; extends the selection, double-click kills the selection),
;; uncomment the following:
;; Under 19.13, the following is enough:
;(define-key global-map 'button3 'mouse-track-adjust)
;; But under 19.12, you need this:
;(define-key global-map 'button3
; (lambda (event)
; (interactive "e")
; (let ((default-mouse-track-adjust t))
; (mouse-track event))))
;; Under both 19.12 and 19.13, you also need this:
;(add-hook 'mouse-track-click-hook
; (lambda (event count)
; (if (or (/= (event-button event) 3)
; (/= count 2))
; nil ;; do the normal operation
; (kill-region (point) (mark))
; t ;; don't do the normal operations.
; )))
))
))
;; Oh, and here's a cute hack you might want to put in the sample .emacs
;; file: it changes the color of the window if it's not on the local
;; machine, or if it's running as root:
;; local emacs background: whitesmoke
;; remote emacs background: palegreen1
;; root emacs background: coral2
(cond
((and (string-match "XEmacs" emacs-version)
(eq window-system 'x)
(boundp 'emacs-major-version)
(= emacs-major-version 19)
(>= emacs-minor-version 12))
(let* ((root-p (eq 0 (user-uid)))
(dpy (or (getenv "DISPLAY") ""))
(remote-p (not
(or (string-match "^\\(\\|unix\\|localhost\\):" dpy)
(let ((s (system-name)))
(if (string-match "\\.\\(netscape\\|mcom\\)\\.com" s)
(setq s (substring s 0 (match-beginning 0))))
(string-match (concat "^" (regexp-quote s)) dpy)))))
(bg (cond (root-p "coral2")
(remote-p "palegreen1")
(t nil))))
(cond (bg
(let ((def (color-name (face-background 'default)))
(faces (face-list)))
(while faces
(let ((obg (face-background (car faces))))
(if (and obg (equal def (color-name obg)))
(set-face-background (car faces) bg)))
(setq faces (cdr faces)))))))))
;;; Older versions of emacs did not have these variables
;;; (emacs-major-version and emacs-minor-version.)
;;; Let's define them if they're not around, since they make
;;; it much easier to conditionalize on the emacs version.
(if (and (not (boundp 'emacs-major-version))
(string-match "^[0-9]+" emacs-version))
(setq emacs-major-version
(string-to-int (substring emacs-version
(match-beginning 0) (match-end 0)))))
(if (and (not (boundp 'emacs-minor-version))
(string-match "^[0-9]+\\.\\([0-9]+\\)" emacs-version))
(setq emacs-minor-version
(string-to-int (substring emacs-version
(match-beginning 1) (match-end 1)))))
;;; Define a function to make it easier to check which version we're
;;; running.
(defun running-emacs-version-or-newer (major minor)
(or (> emacs-major-version major)
(and (= emacs-major-version major)
(>= emacs-minor-version minor))))
(cond ((and running-xemacs
(running-emacs-version-or-newer 19 6))
;;
;; Code requiring XEmacs/Lucid Emacs version 19.6 or newer goes
here
;;
))
(cond ((>= emacs-major-version 19)
;;
;; Code for any vintage-19 emacs goes here
;;
))
(cond ((and (not running-xemacs)
(>= emacs-major-version 19))
;;
;; Code specific to FSF Emacs 19 (not XEmacs/Lucid Emacs) goes
here
;;
))
(cond ((< emacs-major-version 19)
;;
;; Code specific to emacs 18 goes here
;;
))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Customization of Specific Packages ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; Load gnuserv, which will allow you to connect to XEmacs sessions
;;; using `gnuclient'.
;; If you never run more than one XEmacs at a time, you might want to
;; always start gnuserv. Otherwise it is preferable to specify
;; `-f gnuserv-start' on the command line to one of the XEmacsen.
; (gnuserv-start)
;;; ********************
;;; Load efs, which uses the FTP protocol as a pseudo-filesystem.
;;; When this is loaded, the pathname syntax /user@host:/remote/path
;;; refers to files accessible through ftp.
;;;
(require 'dired)
;; compatible ange-ftp/efs initialization derived from code
;; from John Turner <[EMAIL PROTECTED]>
;; As of 19.15, efs is bundled instead of ange-ftp.
;; NB: doesn't handle 20.0 properly, efs didn't appear until 20.1.
;;
;; The environment variable EMAIL_ADDRESS is used as the password
;; for access to anonymous ftp sites, if it is set. If not, one is
;; constructed using the environment variables USER and DOMAINNAME
;; (e.g. [EMAIL PROTECTED]), if set.
(if (and running-xemacs
(or (> emacs-major-version 20)
(and (= emacs-major-version 20) (>= emacs-minor-version 1))
(and (= emacs-major-version 19) (>= emacs-minor-version 15))))
(progn
(message "Loading and configuring bundled packages... efs")
(require 'efs-auto)
(if (getenv "USER")
(setq efs-default-user (getenv "USER")))
(if (getenv "EMAIL_ADDRESS")
(setq efs-generate-anonymous-password (getenv "EMAIL_ADDRESS"))
(if (and (getenv "USER")
(getenv "DOMAINNAME"))
(setq efs-generate-anonymous-password
(concat (getenv "USER")"@"(getenv "DOMAINNAME")))))
(setq efs-auto-save 1))
(progn
(message "Loading and configuring bundled packages... ange-ftp")
(require 'ange-ftp)
(if (getenv "USER")
(setq ange-ftp-default-user (getenv "USER")))
(if (getenv "EMAIL_ADDRESS")
(setq ange-ftp-generate-anonymous-password (getenv "EMAIL_ADDRESS"))
(if (and (getenv "USER")
(getenv "DOMAINNAME"))
(setq ange-ftp-generate-anonymous-password
(concat (getenv "USER")"@"(getenv "DOMAINNAME")))))
(setq ange-ftp-auto-save 1)
)
)
;;; ********************
;;; Load the default-dir.el package which installs fancy handling
;;; of the initial contents in the minibuffer when reading
;;; file names.
(if (and running-xemacs
(or (and (= emacs-major-version 20) (>= emacs-minor-version 1))
(and (= emacs-major-version 19) (>= emacs-minor-version 15))))
(require 'default-dir))
;;; ********************
;;; Load the auto-save.el package, which lets you put all of your
autosave
;;; files in one place, instead of scattering them around the file
system.
;;;
(setq auto-save-directory (expand-file-name "~/autosave/")
auto-save-directory-fallback auto-save-directory
auto-save-hash-p nil
efs-auto-save t
efs-auto-save-remotely nil
;; now that we have auto-save-timeout, let's crank this up
;; for better interactive response.
auto-save-interval 2000
)
;; We load this afterwards because it checks to make sure the
;; auto-save-directory exists (creating it if not) when it's loaded.
(require 'auto-save)
;; This adds additional extensions which indicate files normally
;; handled by cc-mode.
(setq auto-mode-alist
(append '(("\\.C$" . c++-mode)
("\\.cc$" . c++-mode)
("\\.hh$" . c++-mode)
("\\.c$" . c-mode)
("\\.h$" . c-mode))
auto-mode-alist))
;;; ********************
;;; cc-mode (the mode you're in when editing C, C++, and Objective C
files)
;; Tell cc-mode not to check for old-style (K&R) function declarations.
;; This speeds up indenting a lot.
(setq c-recognize-knr-p nil)
;; Change the indentation amount to 4 spaces instead of 2.
;; You have to do it in this complicated way because of the
;; strange way the cc-mode initializes the value of `c-basic-offset'.
(add-hook 'c-mode-hook (lambda () (setq c-basic-offset 4)))
;;; ********************
;;; Load a partial-completion mechanism, which makes minibuffer
completion
;;; search multiple words instead of just prefixes; for example, the
command
;;; `M-x byte-compile-and-load-file RET' can be abbreviated as `M-x
b-c-a RET'
;;; because there are no other commands whose first three words begin
with
;;; the letters `b', `c', and `a' respectively.
;;;
(load-library "completer")
;;; ********************
;;; Load crypt, which is a package for automatically decoding and
reencoding
;;; files by various methods - for example, you can visit a .Z or .gz
file,
;;; edit it, and have it automatically re-compressed when you save it
again.
;;;
(setq crypt-encryption-type 'pgp ; default encryption mechanism
crypt-confirm-password t ; make sure new passwords are correct
;crypt-never-ever-decrypt t ; if you don't encrypt anything, set
this to
; tell it not to assume that "binary" files
; are encrypted and require a password.
)
(require 'crypt)
;;; ********************
;;; Edebug is a source-level debugger for emacs-lisp programs.
;;;
(define-key emacs-lisp-mode-map "\C-xx" 'edebug-defun)
;;; ********************
;;; Font-Lock is a syntax-highlighting package. When it is enabled and
you
;;; are editing a program, different parts of your program will appear
in
;;; different fonts or colors. For example, with the code below,
comments
;;; appear in red italics, function names in function definitions appear
in
;;; blue bold, etc. The code below will cause font-lock to
automatically be
;;; enabled when you edit C, C++, Emacs-Lisp, and many other kinds of
;;; programs.
;;;
;;; The "Options" menu has some commands for controlling this as well.
;;;
(cond (running-xemacs
;; If you want the default colors, you could do this:
;; (setq font-lock-use-default-fonts nil)
;; (setq font-lock-use-default-colors t)
;; but I want to specify my own colors, so I turn off all
;; default values.
(setq font-lock-use-default-fonts nil)
(setq font-lock-use-default-colors nil)
(require 'font-lock)
;; Mess around with the faces a bit. Note that you have
;; to change the font-lock-use-default-* variables *before*
;; loading font-lock, and wait till *after* loading font-lock
;; to customize the faces.
;; string face is green
(set-face-foreground 'font-lock-string-face "forest green")
;; comments are italic and red; doc strings are italic
;;
;; (I use copy-face instead of make-face-italic/make-face-bold
;; because the startup code does intelligent things to the
;; 'italic and 'bold faces to ensure that they are different
;; from the default face. For example, if the default face
;; is bold, then the 'bold face will be unbold.)
(copy-face 'italic 'font-lock-comment-face)
;; Underlining comments looks terrible on tty's
(set-face-underline-p 'font-lock-comment-face nil 'global 'tty)
(set-face-highlight-p 'font-lock-comment-face t 'global 'tty)
(copy-face 'font-lock-comment-face 'font-lock-doc-string-face)
(set-face-foreground 'font-lock-comment-face "red")
;; function names are bold and blue
(copy-face 'bold 'font-lock-function-name-face)
(set-face-foreground 'font-lock-function-name-face "blue")
;; misc. faces
(and (find-face 'font-lock-preprocessor-face) ; 19.13 and above
(copy-face 'bold 'font-lock-preprocessor-face))
(copy-face 'italic 'font-lock-type-face)
(copy-face 'bold 'font-lock-keyword-face)
))
;;; ********************
;;; fast-lock is a package which speeds up the highlighting of files
;;; by saving information about a font-locked buffer to a file and
;;; loading that information when the file is loaded again. This
;;; requires a little extra disk space be used.
;;;
;;; Normally fast-lock puts the cache file (the filename appended with
;;; .flc) in the same directory as the file it caches. You can
;;; specify an alternate directory to use by setting the variable
;;; fast-lock-cache-directories.
;; Let's use lazy-lock instead.
;;(add-hook 'font-lock-mode-hook 'turn-on-fast-lock)
;;(setq fast-lock-cache-directories '("/foo/bar/baz"))
;;; ********************
;;; lazy-lock is a package which speeds up the highlighting of files
;;; by doing it "on-the-fly" -- only the visible portion of the
;;; buffer is fontified. The results may not always be quite as
;;; accurate as using full font-lock or fast-lock, but it's *much*
;;; faster. No more annoying pauses when you load files.
(add-hook 'font-lock-mode-hook 'turn-on-lazy-lock)
;; I personally don't like "stealth mode" (where lazy-lock starts
;; fontifying in the background if you're idle for 30 seconds)
;; because it takes too long to wake up again on my piddly Sparc 1+.
(setq lazy-lock-stealth-time nil)
;;; ********************
;;; func-menu is a package that scans your source file for function
;;; definitions and makes a menubar entry that lets you jump to any
;;; particular function definition by selecting it from the menu. The
;;; following code turns this on for all of the recognized languages.
;;; Scanning the buffer takes some time, but not much.
;;;
;;; Send bug reports, enhancements etc to:
;;; David Hughes <[EMAIL PROTECTED]>
;;;
(cond (running-xemacs
(require 'func-menu)
(define-key global-map 'f8 'function-menu)
(add-hook 'find-file-hooks 'fume-add-menubar-entry)
(define-key global-map "\C-cl" 'fume-list-functions)
(define-key global-map "\C-cg" 'fume-prompt-function-goto)
;; The Hyperbole information manager package uses (shift button2)
and
;; (shift button3) to provide context-sensitive mouse keys. If
you
;; use this next binding, it will conflict with Hyperbole's
setup.
;; Choose another mouse key if you use Hyperbole.
(define-key global-map '(shift button3) 'mouse-function-menu)
;; For descriptions of the following user-customizable variables,
;; type C-h v <variable>
(setq fume-max-items 25
fume-fn-window-position 3
fume-auto-position-popup t
fume-display-in-modeline-p t
fume-menubar-menu-location "File"
fume-buffer-name "*Function List*"
fume-no-prompt-on-valid-default nil)
))
;;; ********************
;;; MH is a mail-reading system from the Rand Corporation that relies on
a
;;; number of external filter programs (which do not come with emacs.)
;;; Emacs provides a nice front-end onto MH, called "mh-e".
;;;
;; Bindings that let you send or read mail using MH
;(global-set-key "\C-xm" 'mh-smail)
;(global-set-key "\C-x4m" 'mh-smail-other-window)
;(global-set-key "\C-cr" 'mh-rmail)
;; Customization of MH behavior.
(setq mh-delete-yanked-msg-window t)
(setq mh-yank-from-start-of-msg 'body)
(setq mh-summary-height 11)
;; Use lines like the following if your version of MH
;; is in a special place.
;(setq mh-progs "/usr/dist/pkgs/mh/bin.svr4/")
;(setq mh-lib "/usr/dist/pkgs/mh/lib.svr4/")
;;; ********************
;;; resize-minibuffer-mode makes the minibuffer automatically
;;; resize as necessary when it's too big to hold its contents.
(autoload 'resize-minibuffer-mode "rsz-minibuf" nil t)
(resize-minibuffer-mode)
(setq resize-minibuffer-window-exactly nil)
;;; ********************
;;; W3 is a browser for the World Wide Web, and takes advantage of the
very
;;; latest redisplay features in XEmacs. You can access it simply by
typing
;;; 'M-x w3'; however, if you're unlucky enough to be on a machine that
is
;;; behind a firewall, you will have to do something like this first:
;(setq w3-use-telnet t
; ;;
; ;; If the Telnet program you use to access the outside world is
; ;; not called "telnet", specify its name like this.
; w3-telnet-prog "itelnet"
; ;;
; ;; If your Telnet program adds lines of junk at the beginning
; ;; of the session, specify the number of lines here.
; w3-telnet-header-length 4
; )
(setq load-path
(nconc '(
"/home/tjturner/jde/jde-2.1.5"
)
load-path))
(require 'jde)
(custom-set-variables)
(custom-set-faces)
;; required to run the JDE.
;; Update the Emacs load-path to include the path to
;; the JDE. This code assumes that you have installed
;; the JDE in the specified subdirectory of your home
;; directory.
(setq load-path
(nconc
'(
"/home/tjturner/jde/jde-2.1.5"
)
load-path))
;; Tell Emacs to load the entire JDE package at startup (only once).
(require 'jde)
;; Sets the basic indentation for Java source files
;; to two spaces.
(defun my-jde-mode-hook ()
(setq c-basic-offset 2))
(add-hook 'jde-mode-hook 'my-jde-mode-hook)
;; Include the following only if you want to run
;; bash as your shell.
;; Setup Emacs to run bash as its primary shell.
(setq binary-process-input t)
(setq shell-file-name "bash")
(setq explicit-shell-file-name shell-file-name)
(setenv "SHELL" shell-file-name)
(setq explicit-sh-args '("-login" "-i"))
(setq w32-quote-process-args ?\") ;; Use Cygnus quoting rules.
