Yes, you can do that, you just can't set it from a shell script.
On Wed, Apr 25, 2018, 00:20 Somshekar C Kadam <somkada...@gmail.com> wrote:
> Thanks Slide for the help, things are clear.
> One more doubt I have, can we not set global variable which will set that
> variable between different stages
>
> For ex consider
> once Unit test is passed
> set variable pass = true
>
> same variable will be used in QA test stage to start if pass = true, start
> QA test
>
> thanks
> Somshekar
>
>
> Regards
> Somshekar C Kadam
> 9036660538
>
> On Fri, Apr 20, 2018 at 8:59 PM, Slide <slide.o....@gmail.com> wrote:
>
>> The other problem is that you are expecting state to be retained between
>> invocations of sh.
>>
>> sh 'cd /media/usb'
>> sh 'rm -rf testing'
>> sh 'mkdir testing'
>> sh 'cd testing'
>> git branch: 'feature', url: 'g...@github.com:
>> CelestialSystem/cyelp.git'
>> sh 'cp develop-unit/arm/ltp.sh /media/usb; chmod 777 /media/usb/ltp.sh;'
>> sh 'cp develop-unit/arm/verify.sh /media/usb; chmod 777
>> /media/usb/verify.sh;'
>> sh '/media/usb/ltp.sh'
>> sh 'cd /media/usb'
>> sh '/media/usb/verify.sh'
>> sh 'cd /media/usb/results'
>>
>> Each call to sh is a completely separate shell script invocation, which
>> means that any cd you do will not be retained on the next invocation of sh.
>> If you want to do stuff like this, you should use one shell script
>> invocation
>>
>> # clone the code into the workspace, it will be copied later
>> git branch: 'feature', url: 'g...@github.com:CelestialSystem/cyelp.git'
>>
>> # run test procedure (it would be even better to put this into a shell
>> script within your code base)
>> sh """
>> cd /media/usb
>> rm -rf testing
>> mkdir testing
>> cd testing
>> cp -r ${WORKSPACE}/cyelp ./
>> cp develop-unit/arm/ltp.sh /media/usb; chmod 777 /media/usb/ltp.sh
>> cp develop-unit/arm/verify.sh /media/usb; chmod 777 /media/usb/verify.sh
>> /media/usb/ltp.sh
>> cd /media/usb
>> /media/usb/verify.sh
>> cd /media/usb/results
>> cp results ${WORKSPACE}
>> """
>> # now read the output file that was copied in the shell steps above
>> output = readFile 'results'
>>
>> etc.
>>
>>
>>
>>
>>
>> On Fri, Apr 20, 2018 at 1:09 AM Somshekar C Kadam <somkada...@gmail.com>
>> wrote:
>>
>>> Hi Slide,
>>>
>>> One more observation, this result file is not in workspace. that is the
>>> reason its always outputting 1 when we print the file content.
>>> This could be root cause in my understanding.
>>> I am sorry I should have mentioned this ealrier that verify script
>>> writes this file on hardisk which is not part of the workspace.
>>> I will try to add this in workspace hope as you said it should work
>>>
>>> regards
>>> Somshekar
>>>
>>> Regards
>>> Somshekar C Kadam
>>> 9036660538 <(903)%20666-0538>
>>>
>>> On Fri, Apr 20, 2018 at 10:40 AM, Somshekar C Kadam <
>>> somkada...@gmail.com> wrote:
>>>
>>>> Hi Slide,
>>>>
>>>> Sorry for the delay got some personal work had to step out.
>>>> Here is the full script for test stage
>>>> Here verify script writes to "result" file 0 on success and 1 on
>>>> failure.
>>>> I am checking on the machine its value is 0, but still when i compare
>>>> value of output as mentioned by you it is till 1
>>>> also below script block using awk gives value as 1 always.
>>>>
>>>> Any other way I need to do this.
>>>>
>>>> ===============================
>>>>
>>>> stage(‘Test’) {
>>>> agent {
>>>> label 'build'
>>>> }
>>>> environment {
>>>> res = 'pass'
>>>> qapass = 'fail'
>>>> output = '-1'
>>>> }
>>>> steps {
>>>>
>>>> sh 'cd /media/usb'
>>>> sh 'rm -rf testing'
>>>> sh 'mkdir testing'
>>>> sh 'cd testing'
>>>> git branch: 'feature', url: 'g...@github.com:
>>>> CelestialSystem/cyelp.git'
>>>> sh 'cp develop-unit/arm/ltp.sh /media/usb; chmod 777 /media/usb/ltp.sh;'
>>>> sh 'cp develop-unit/arm/verify.sh /media/usb; chmod 777
>>>> /media/usb/verify.sh;'
>>>> sh '/media/usb/ltp.sh'
>>>> sh 'cd /media/usb'
>>>> sh '/media/usb/verify.sh'
>>>> sh 'cd /media/usb/results'
>>>> script {
>>>> output = readFile 'result'
>>>> echo "Value of outttt is $output "
>>>> if(output == "0") {
>>>> print "Unittest cases Passed"
>>>> } else {
>>>>
>>>> print "Unittest cases Failed"
>>>> }
>>>> awk '{ if ($1 == 0 ) { print "Success"; } else print "failure" }' result
>>>>
>>>> }
>>>>
>>>> script {
>>>> sh '''
>>>> awk '{ if ($1 == 0 ) { print "Success"; } else print "failure" }' result
>>>> echo 'outside the script'
>>>> '''
>>>> }
>>>> echo "$unitpass"
>>>> echo 'hey man done complete'
>>>> }
>>>> }
>>>>
>>>>
>>>> stage(‘Deploy’) {
>>>> agent {
>>>> //echo ‘Testing..’
>>>> label 'build'
>>>> }
>>>> steps {
>>>> //echo ‘Deploying….’
>>>> echo 'hey man done complete'
>>>>
>>>> }
>>>> }
>>>>
>>>> }
>>>> post {
>>>>
>>>> failure {
>>>> mail to: 'somkada...@gmail.com',
>>>> subject: "Failed Pipeline:
>>>> ${currentBuild.fullDisplayName}",
>>>> body: "Something is wrong with ${env.BUILD_URL}"
>>>> }
>>>> success {
>>>> mail to: 'somkada...@gmail.com',
>>>> subject: "Success Pipeline:
>>>> ${currentBuild.fullDisplayName}",
>>>> body: "Build Completed boy ${env.BUILD_URL}"
>>>> }
>>>> }
>>>> }
>>>>
>>>> ===========================================================
>>>>
>>>> thanks and regards
>>>> Somshekar
>>>> On Thu, 19 Apr 2018 19:39 Slide, <slide.o....@gmail.com> wrote:
>>>>
>>>>> Post your full script
>>>>>
>>>>> On Thu, Apr 19, 2018, 06:52 Somshekar C Kadam <somkada...@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Slide,
>>>>>>
>>>>>> I meant always the result file has 0, using above readfile when I
>>>>>> compare in if cond it always says 1, I have even echoed tha value its
>>>>>> shows
>>>>>> 1, not sure why
>>>>>>
>>>>>> regards
>>>>>> Somshekar
>>>>>>
>>>>>> Regards
>>>>>> Somshekar C Kadam
>>>>>> 9036660538 <(903)%20666-0538>
>>>>>>
>>>>>> On Thu, Apr 19, 2018 at 7:21 PM, Somshekar C Kadam <
>>>>>> somkada...@gmail.com> wrote:
>>>>>>
>>>>>>> Hi Slide,
>>>>>>>
>>>>>>> Thanks for the inputs.
>>>>>>> I did check the value of output its returning always 1, actually it
>>>>>>> has value 0. not sure why?
>>>>>>>
>>>>>>> one more clarification can we call awk in script { } block ?
>>>>>>>
>>>>>>> regards
>>>>>>> Somshekar
>>>>>>>
>>>>>>>
>>>>>>> Regards
>>>>>>> Somshekar C Kadam
>>>>>>> 9036660538 <(903)%20666-0538>
>>>>>>>
>>>>>>> On Thu, Apr 19, 2018 at 7:12 PM, Slide <slide.o....@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Ok, then my suggestion is fine, after readFile, the variable output
>>>>>>>> has the value, so just use an if check directly in the script block of
>>>>>>>> the
>>>>>>>> pipeline. script blocks are groovy scripts, so you can use most of the
>>>>>>>> functionality of groovy to do what you want.
>>>>>>>>
>>>>>>>> On Thu, Apr 19, 2018 at 6:24 AM Somshekar C Kadam <
>>>>>>>> somkada...@gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi Slide,
>>>>>>>>>
>>>>>>>>> You got it right.
>>>>>>>>>
>>>>>>>>> result file contains either 0 or 1 as a unittest pass or fail.
>>>>>>>>> I need to read this file which contains 0 or 1 and proceed next
>>>>>>>>> stage.
>>>>>>>>>
>>>>>>>>> thanks in advance
>>>>>>>>> regards
>>>>>>>>> Somshekar
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>> Somshekar C Kadam
>>>>>>>>> 9036660538 <(903)%20666-0538>
>>>>>>>>>
>>>>>>>>> On Thu, Apr 19, 2018 at 6:52 PM, Slide <slide.o....@gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Well, it depends on what you are expecting to happen with these
>>>>>>>>>> lines:
>>>>>>>>>>
>>>>>>>>>> awk '{ if ($1 == 0 ) { $res = "passed" } else $res = "fail" }'
>>>>>>>>>> result
>>>>>>>>>>
>>>>>>>>>> awk '{ if ($1 == 0 ) { print "Success"; } else print "failure" }'
>>>>>>>>>> result
>>>>>>>>>>
>>>>>>>>>> The shell scripts don't take parameters, so what are you
>>>>>>>>>> expecting to be in $1? What does the variable output contain? Will it
>>>>>>>>>> contain the 0 or other exit code? If so, just use an if statement in
>>>>>>>>>> the
>>>>>>>>>> script {} block to check the value
>>>>>>>>>>
>>>>>>>>>> script {
>>>>>>>>>> ...
>>>>>>>>>> output = readFile 'result'
>>>>>>>>>> if(output == "0") {
>>>>>>>>>>
>>>>>>>>>> } else {
>>>>>>>>>>
>>>>>>>>>> }
>>>>>>>>>>
>>>>>>>>>> }
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Thu, Apr 19, 2018 at 6:15 AM Somshekar C Kadam <
>>>>>>>>>> somkada...@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Slide,
>>>>>>>>>>>
>>>>>>>>>>> First of thanks for the response. Ok understood
>>>>>>>>>>> Am not finding any documentation to do the same in
>>>>>>>>>>> jjenkinsfile.
>>>>>>>>>>> Please can you point to it or any example will help
>>>>>>>>>>>
>>>>>>>>>>> regards
>>>>>>>>>>> Somshekar
>>>>>>>>>>>
>>>>>>>>>>> Regards
>>>>>>>>>>> Somshekar C Kadam
>>>>>>>>>>> 9036660538 <(903)%20666-0538>
>>>>>>>>>>>
>>>>>>>>>>> On Thu, Apr 19, 2018 at 6:39 PM, Slide <slide.o....@gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> You can't set res inside a shell script and have it set in the
>>>>>>>>>>>> pipeline. It seems like you are trying to use shell scripts to do
>>>>>>>>>>>> things
>>>>>>>>>>>> that could be done directly in the Jenkinsfile as well. Is there a
>>>>>>>>>>>> reason
>>>>>>>>>>>> you are using shell scripts for that?
>>>>>>>>>>>>
>>>>>>>>>>>> On Thu, Apr 19, 2018 at 1:41 AM Somshekar <somkada...@gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi All,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I am trying to change the value of string dependign upon the
>>>>>>>>>>>>> unittest cases passed by reading a file.
>>>>>>>>>>>>> For next stage to proceed I want to set the string depending
>>>>>>>>>>>>> upon the value next stage qa or other stage can proceed.
>>>>>>>>>>>>> but not able to change value f string in jenkins file.
>>>>>>>>>>>>>
>>>>>>>>>>>>> value of res is not changing at all
>>>>>>>>>>>>>
>>>>>>>>>>>>> also to verify I have added one more script block belwo it to
>>>>>>>>>>>>> verify if able to read file proerly and its value, its working
>>>>>>>>>>>>> fine. below
>>>>>>>>>>>>> its printing failure as value is set to 1 in result file.
>>>>>>>>>>>>>
>>>>>>>>>>>>> not sure on this, please let me know possible solution thanks
>>>>>>>>>>>>> in advance
>>>>>>>>>>>>>
>>>>>>>>>>>>> =====================
>>>>>>>>>>>>> environment {
>>>>>>>>>>>>> res = 'pass'
>>>>>>>>>>>>> qapass = 'fail'
>>>>>>>>>>>>> output = '-1'
>>>>>>>>>>>>> }
>>>>>>>>>>>>>
>>>>>>>>>>>>> ....
>>>>>>>>>>>>> ....
>>>>>>>>>>>>>
>>>>>>>>>>>>> script {
>>>>>>>>>>>>> output = readFile 'result'
>>>>>>>>>>>>> echo "Value of output is $output"
>>>>>>>>>>>>> echo 'inside the script'
>>>>>>>>>>>>> sh '''
>>>>>>>>>>>>> awk '{ if ($1 == 0 ) { $res =
>>>>>>>>>>>>> "passed" } else $res = "fail" }' result
>>>>>>>>>>>>> echo 'outside the script'
>>>>>>>>>>>>> echo "value is $res"
>>>>>>>>>>>>> '''
>>>>>>>>>>>>> }
>>>>>>>>>>>>> script {
>>>>>>>>>>>>> sh '''
>>>>>>>>>>>>> awk '{ if ($1 == 0 ) { print
>>>>>>>>>>>>> "Success"; } else print "failure" }' result
>>>>>>>>>>>>> echo 'outside the script'
>>>>>>>>>>>>> '''
>>>>>>>>>>>>> }
>>>>>>>>>>>>>
>>>>>>>>>>>>> ==========================
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>>> Google Groups "Jenkins Users" group.
>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>>> it, send an email to
>>>>>>>>>>>>> jenkinsci-users+unsubscr...@googlegroups.com.
>>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/8b5e5fd5-8e6f-486f-aa54-f5bc97aa1f03%40googlegroups.com
>>>>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/8b5e5fd5-8e6f-486f-aa54-f5bc97aa1f03%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>> .
>>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>> Google Groups "Jenkins Users" group.
>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>> it, send an email to
>>>>>>>>>>>> jenkinsci-users+unsubscr...@googlegroups.com.
>>>>>>>>>>>>
>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVfvD%3DhiFmw2-RcTZhAV%3D0UAfX1VGMYdG%2B4%2BNyMq5rNp4Q%40mail.gmail.com
>>>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVfvD%3DhiFmw2-RcTZhAV%3D0UAfX1VGMYdG%2B4%2BNyMq5rNp4Q%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>> Google Groups "Jenkins Users" group.
>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>> it, send an email to
>>>>>>>>>>> jenkinsci-users+unsubscr...@googlegroups.com.
>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3d-9vOVGcviqS6JqnKU0U669ey7Dw7irVkZNL7XSqoQ%40mail.gmail.com
>>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3d-9vOVGcviqS6JqnKU0U669ey7Dw7irVkZNL7XSqoQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>> .
>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "Jenkins Users" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to jenkinsci-users+unsubscr...@googlegroups.com.
>>>>>>>>>>
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVfz8KEM9KS7Q2VP5RAai0%3D6KY1Dbig_1mvTs1T6wDNa1A%40mail.gmail.com
>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVfz8KEM9KS7Q2VP5RAai0%3D6KY1Dbig_1mvTs1T6wDNa1A%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "Jenkins Users" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to jenkinsci-users+unsubscr...@googlegroups.com.
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-ps-XRJaG-R7jsPC-%2BbD3nZu4NJEpkJYsyA_cCT5rgrBA%40mail.gmail.com
>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-ps-XRJaG-R7jsPC-%2BbD3nZu4NJEpkJYsyA_cCT5rgrBA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "Jenkins Users" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to jenkinsci-users+unsubscr...@googlegroups.com.
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVdy-67daooVFrLtk-wgtCt6YpJzCtGWREGK7ucBXcxq5Q%40mail.gmail.com
>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVdy-67daooVFrLtk-wgtCt6YpJzCtGWREGK7ucBXcxq5Q%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "Jenkins Users" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to jenkinsci-users+unsubscr...@googlegroups.com.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3%2BJrJFqpa6e6hAN4XYLfrnGvCbttpuR1_GXtrTjjdBQ%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3%2BJrJFqpa6e6hAN4XYLfrnGvCbttpuR1_GXtrTjjdBQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "Jenkins Users" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to jenkinsci-users+unsubscr...@googlegroups.com.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVf%2Bj2gU6-9PKh1yTPSmGGvvSLDNsCcCGD6OHQh5eJHbtw%40mail.gmail.com
>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVf%2Bj2gU6-9PKh1yTPSmGGvvSLDNsCcCGD6OHQh5eJHbtw%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Jenkins Users" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to jenkinsci-users+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-rASCLkiROwHKAkAb-eRRqP4CictgPAjiscsrdF4PHAzA%40mail.gmail.com
>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-rASCLkiROwHKAkAb-eRRqP4CictgPAjiscsrdF4PHAzA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Jenkins Users" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to jenkinsci-users+unsubscr...@googlegroups.com.
>>
> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVcM68Dy1ZXF0SoNkGmU%2BwGnyBnhbLnNk7czjSj1B3tfbA%40mail.gmail.com
>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVcM68Dy1ZXF0SoNkGmU%2BwGnyBnhbLnNk7czjSj1B3tfbA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>
>
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Jenkins Users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to jenkinsci-users+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-owxV0ssqbozZMwwTGLpKo_b_0Tc_TUjuNJnE%3DDNoBj_w%40mail.gmail.com
> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-owxV0ssqbozZMwwTGLpKo_b_0Tc_TUjuNJnE%3DDNoBj_w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"Jenkins Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to jenkinsci-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVcAWHZDY%2BcWcJvmY_z%2BFdhszQoo%3DUTzszdU02s9Up4ryQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
