Hi Chris, If you have JFFNMS 0.7.7, you can modify the Treshold variable on a per-interface basis.
Its currently set to a default of 80%. If you are running 0.7.6, then you could upgrade, or create a new SLA with other parameters. And then assign it to the interfaces you want. Javier On Wednesday 12 May 2004 11:27, Chris Tuska(Home) wrote: > How can I change the default SLA for Drive space from 80% to 90% ??? > > Thanks, > > Tuska > > In theory, theory and practice are the same. In practice, they aren't > > > ------------------------------------------------------- > This SF.Net email is sponsored by Sleepycat Software > Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to > deliver higher performing products faster, at low TCO. > http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 > _______________________________________________ > jffnms-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/jffnms-users -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Javier Szyszlican, Project Leader, JFFNMS [EMAIL PROTECTED] I hope JFFNMS or I were helpful to you, if you can, please donate at http://jffnms.org/donate ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
