You just have to create the host, put snmpv2 or v3......and save, then
edit the host and you´ll see the boxes for the snmpv2 or v3 data!!!
Hope it helps
Jesus
====================
Can anyone give me a simple explaination of how to get SNMP V 2 or V3
working with JFFNMS?
I can configure the router end no problems - but what I can't figure out
is
how to specify the username/password for the SNMP queries - JFFNMS asks
for
a community string - as far as I can tell, there *is* no community string
under V2 or V3 of SNMP.
Can someone set me straight?
Thanks
Darren Gibbs
Senior Network Engineer
Sky Channel
Phone: +61 2 9975 0344
Fax: +61 2 9975 6443
Mobile: 0422 005 541
SW Board: +61 2 9451 0888
Email: [EMAIL PROTECTED]
Jesus J.
Toda la información sobre el mundo del motor
y los vehículos último modelo a tu alcance.
http://motor.tiscali.es/
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September
19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
jffnms-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jffnms-users
