Hi Tim,
Thanks for the advice. But the php4-snmp is already installed with net-snmp but I am not sure why php-snmp could be loaded Thank you Nabil -----Original Message----- From: Tim Nelson [mailto:[EMAIL PROTECTED] Sent: 18 February 2008 18:22 To: Nabil Alkhamery Cc: [email protected] Subject: Re: [jffnms-users] Setup could not be completed It sounds like you're missing the SNMP PHP module. Depending on your distro, you may be able to easily install it with your package manager. On Fedora/CentOS systems, try 'yum install php-snmp'. Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 ----- Original Message ----- From: "Nabil Alkhamery" <[EMAIL PROTECTED]> To: [email protected] Sent: Monday, February 18, 2008 3:35:33 AM (GMT-0600) America/Chicago Subject: [jffnms-users] Setup could not be completed Hi All, I have installed jffnms with all requirements. ( only snmp still shows unloaded in the setup Page). I save the config but same setup page return back. As documents I should be forward to the admin page but I am still be forwarded again to the setup page. Any idea? Where could be the problem? Thanks for advise Nabil ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users
